Comparison of engine power correction factors for varying atmospheric conditions

Detalhes bibliográficos
Autor(a) principal: Sodré,J. R.
Data de Publicação: 2003
Outros Autores: Soares,S. M. C.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online)
Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1678-58782003000300010
Resumo: This work evaluates proposed methods to correct engine power output as a function of atmospheric conditions. The analysis was made through experiments carried out in a vehicle on the road, under different temperature, pressure and air humidity conditions. The vehicle had a four-cylinder gasoline-fuelled engine, with multi-point fuel injection system, variable intake pipe length and variable intake valve camshaft position. The vehicle was tested at sea level and at 827 m above sea level, corresponding to atmospheric pressures between 1027 and 926 mbar. Air temperature varied from 22,8 to 33,8 °C at the test locations. The measured performance parameter in the tests was the vehicle acceleration time. The acceleration times from 0 to 400 m, 0 to 1000 m, 40 to 100 km/h and 80 to 120 km/h were all recorded, leaving from an initial vehicle speed of 40 km/h. The engine power curve obtained in laboratory under a standard ambient condition was corrected to the conditions of the road tests by the correction factors proposed by the methods under evaluation, and the corresponding acceleration times were calculated and compared with the measurements from the road tests. The evaluated methods for power correction were the following: DIN 70020, SAE J 1349, JIS D 1001 and ISO 1585. The SAE J 1349 method provided the best approach between the experimental and calculated acceleration times.
id ABCM-2_5181c639aaae0d04ac044595603f5680
oai_identifier_str oai:scielo:S1678-58782003000300010
network_acronym_str ABCM-2
network_name_str Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online)
repository_id_str
spelling Comparison of engine power correction factors for varying atmospheric conditionsInternal combustion engineacceleration timeatmospheric pressuretemperaturepowerThis work evaluates proposed methods to correct engine power output as a function of atmospheric conditions. The analysis was made through experiments carried out in a vehicle on the road, under different temperature, pressure and air humidity conditions. The vehicle had a four-cylinder gasoline-fuelled engine, with multi-point fuel injection system, variable intake pipe length and variable intake valve camshaft position. The vehicle was tested at sea level and at 827 m above sea level, corresponding to atmospheric pressures between 1027 and 926 mbar. Air temperature varied from 22,8 to 33,8 °C at the test locations. The measured performance parameter in the tests was the vehicle acceleration time. The acceleration times from 0 to 400 m, 0 to 1000 m, 40 to 100 km/h and 80 to 120 km/h were all recorded, leaving from an initial vehicle speed of 40 km/h. The engine power curve obtained in laboratory under a standard ambient condition was corrected to the conditions of the road tests by the correction factors proposed by the methods under evaluation, and the corresponding acceleration times were calculated and compared with the measurements from the road tests. The evaluated methods for power correction were the following: DIN 70020, SAE J 1349, JIS D 1001 and ISO 1585. The SAE J 1349 method provided the best approach between the experimental and calculated acceleration times.Associação Brasileira de Engenharia e Ciências Mecânicas - ABCM2003-09-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1678-58782003000300010Journal of the Brazilian Society of Mechanical Sciences and Engineering v.25 n.3 2003reponame:Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online)instname:Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)instacron:ABCM10.1590/S1678-58782003000300010info:eu-repo/semantics/openAccessSodré,J. R.Soares,S. M. C.eng2004-03-18T00:00:00Zoai:scielo:S1678-58782003000300010Revistahttps://www.scielo.br/j/jbsmse/https://old.scielo.br/oai/scielo-oai.php||abcm@abcm.org.br1806-36911678-5878opendoar:2004-03-18T00:00Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online) - Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)false
dc.title.none.fl_str_mv Comparison of engine power correction factors for varying atmospheric conditions
title Comparison of engine power correction factors for varying atmospheric conditions
spellingShingle Comparison of engine power correction factors for varying atmospheric conditions
Sodré,J. R.
Internal combustion engine
acceleration time
atmospheric pressure
temperature
power
title_short Comparison of engine power correction factors for varying atmospheric conditions
title_full Comparison of engine power correction factors for varying atmospheric conditions
title_fullStr Comparison of engine power correction factors for varying atmospheric conditions
title_full_unstemmed Comparison of engine power correction factors for varying atmospheric conditions
title_sort Comparison of engine power correction factors for varying atmospheric conditions
author Sodré,J. R.
author_facet Sodré,J. R.
Soares,S. M. C.
author_role author
author2 Soares,S. M. C.
author2_role author
dc.contributor.author.fl_str_mv Sodré,J. R.
Soares,S. M. C.
dc.subject.por.fl_str_mv Internal combustion engine
acceleration time
atmospheric pressure
temperature
power
topic Internal combustion engine
acceleration time
atmospheric pressure
temperature
power
description This work evaluates proposed methods to correct engine power output as a function of atmospheric conditions. The analysis was made through experiments carried out in a vehicle on the road, under different temperature, pressure and air humidity conditions. The vehicle had a four-cylinder gasoline-fuelled engine, with multi-point fuel injection system, variable intake pipe length and variable intake valve camshaft position. The vehicle was tested at sea level and at 827 m above sea level, corresponding to atmospheric pressures between 1027 and 926 mbar. Air temperature varied from 22,8 to 33,8 °C at the test locations. The measured performance parameter in the tests was the vehicle acceleration time. The acceleration times from 0 to 400 m, 0 to 1000 m, 40 to 100 km/h and 80 to 120 km/h were all recorded, leaving from an initial vehicle speed of 40 km/h. The engine power curve obtained in laboratory under a standard ambient condition was corrected to the conditions of the road tests by the correction factors proposed by the methods under evaluation, and the corresponding acceleration times were calculated and compared with the measurements from the road tests. The evaluated methods for power correction were the following: DIN 70020, SAE J 1349, JIS D 1001 and ISO 1585. The SAE J 1349 method provided the best approach between the experimental and calculated acceleration times.
publishDate 2003
dc.date.none.fl_str_mv 2003-09-01
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1678-58782003000300010
url http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1678-58782003000300010
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 10.1590/S1678-58782003000300010
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv text/html
dc.publisher.none.fl_str_mv Associação Brasileira de Engenharia e Ciências Mecânicas - ABCM
publisher.none.fl_str_mv Associação Brasileira de Engenharia e Ciências Mecânicas - ABCM
dc.source.none.fl_str_mv Journal of the Brazilian Society of Mechanical Sciences and Engineering v.25 n.3 2003
reponame:Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online)
instname:Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)
instacron:ABCM
instname_str Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)
instacron_str ABCM
institution ABCM
reponame_str Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online)
collection Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online)
repository.name.fl_str_mv Journal of the Brazilian Society of Mechanical Sciences and Engineering (Online) - Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)
repository.mail.fl_str_mv ||abcm@abcm.org.br
_version_ 1754734680066752512