Detalhes bibliográficos
| Autor(a) principal: |
Segreto,Dario Raimundo |
| Data de Publicação: |
2016 |
| Outros Autores: |
Naufel,Fabiana Scarparo,
Brandt,William Cunha,
Guiraldo,Ricardo Danil,
Correr-Sobrinho,Lourenço,
Sinhoreti,Mário Alexandre Coelho |
| Tipo de documento: |
Artigo
|
| Idioma: |
eng |
| Título da fonte: |
Brazilian Dental Journal |
| Texto Completo: |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0103-64402016000100083
|
Resumo: |
Abstract This study evaluated the bond strength (BS) of experimental resin cements formulated with different photoinitiators when activated by two kinds of light-curing units (LCUs) through a ceramic material. Seven resin blends with different camphorquinone (CQ) and/or phenylpropanedione (PPD) concentrations (weight) were prepared: C5: 0.5% CQ; C8: 0.8% CQ; P5: 0.5% PPD; P8: 0.8% PPD; C1P4: 0.1% CQ and 0.4% PPD; C4P1: 0.4% CQ and 0.1% PPD; C4P4: 0.4% CQ and 0.4% PPD. Two LCUs were used: one quartz-tungsten-halogen (QTH - 850 mW/cm²) and one light-emitting diode (LED - 1300 mW/cm²). The microtensile bond strength of each blend was assessed. Data were submitted to two-way ANOVA and Tukey's test (α=0.05). The BS values did not exhibit significant differences for LCUs, regardless of the photoinitiator type. Three cements showed significant differences: P5 and C5 had higher BS with QTH, and C4P1 with LED. For QTH, P5 showed the highest and C1P4 the lowest BS. For the LED, C4P1 showed the highest BS of all the cements. The results indicated that PPD was a viable alternative in the formulation of photocured resin cements, reducing or eliminating CQ that is yellowish without impairing the bond strength. Furthermore, both LED and QTH were effective in curing resin cements that contain PPD or CQ. |