Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja
Autor(a) principal: | |
---|---|
Data de Publicação: | 2006 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | LOCUS Repositório Institucional da UFV |
Texto Completo: | http://locus.ufv.br/handle/123456789/630 |
Resumo: | The soil s physical conditioning around the seeds is important to the initial cultivation development and to assure an adequate plant population. An appropriate soil-seed contact is required to a rapid emergence and a good effectiveness of cultivation. The present work aimed to study the effects of the combination between the soil water contents of the soil and the loads applied by the press wheel of seed drills on the soil-seed contact in a system of direct planting cultivated with soybean. The experiment was made as subdivided design, where units had three soil water contents (U1, U2 e U3) corresponding to 0.27, 0.31 and 0.36 kg kg-1, and in the sub-units, the four load levels applied by the press wheel (C1, C2, C3 e C4), corresponding to 0, 50, 90 and 140 N, respectively, in random blocks deign, with four repetitions. Before the experiment installation, physical attributes of the experimental area were determined: textural analysis, soil water content, soil density, particles density, total porosity and the mechanical soil resistance. After planting, the emergence speed index, the aggregate average diameter in the planted line, the percentage of fines (< 2.0 mm), the minimum, medium and maximum soil density in the seed area, the minimum, medium and maximum soil density profile, and the mechanical soil resistance to the penetration in the planted line. According to the results, the present work allowed conclude that: the loads applied by the press wheel increased the soil density in the vertical planting level beneath the planting depth, when compared with values obtained before the planting; the combination between the loads applied by the press wheel and the soil water contents did not influence the < 2.0 mm percentage and the minimum, medium and maximum soil densities in the seed area; the best plant emergence speed index occurred whit soil water contents of 0.33 kg kg-1 and loads of 86.21 N; using the computerized tomography of non-deformed soil samples, it was possible to quantify minimum, medium and maximum soil density profile, allowing the detailed densities characterization from surface down to the studied depth; the maximum load of 140 N applied by the press wheel on the seed caused a superficial crust of the soil, delaying the plants emergence; soybean planting should not occur without soil compactation around the seed. |
id |
UFV_7b856a78e726b34feaa40c9c837943a0 |
---|---|
oai_identifier_str |
oai:locus.ufv.br:123456789/630 |
network_acronym_str |
UFV |
network_name_str |
LOCUS Repositório Institucional da UFV |
repository_id_str |
2145 |
spelling |
Modolo, Alcir Joséhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4766077Y7Schaefer, Carlos Ernesto Gonçalves Reynaudhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4723204Y8Fernandes, Haroldo Carloshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4761460E6Teixeira, Mauri Martinshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783316J8Araújo, Eduardo Fonteshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787131J6Araújo, Roberto Fonteshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785502H82015-03-26T12:31:02Z2006-12-012015-03-26T12:31:02Z2006-06-05MODOLO, Alcir José. Effect of water content and load applied by the press wheel on the soil-seed environment in the soybean direct planting system. 2006. 97 f. Tese (Doutorado em Construções rurais e ambiência; Energia na agricultura; Mecanização agrícola; Processamento de produ) - Universidade Federal de Viçosa, Viçosa, 2006.http://locus.ufv.br/handle/123456789/630The soil s physical conditioning around the seeds is important to the initial cultivation development and to assure an adequate plant population. An appropriate soil-seed contact is required to a rapid emergence and a good effectiveness of cultivation. The present work aimed to study the effects of the combination between the soil water contents of the soil and the loads applied by the press wheel of seed drills on the soil-seed contact in a system of direct planting cultivated with soybean. The experiment was made as subdivided design, where units had three soil water contents (U1, U2 e U3) corresponding to 0.27, 0.31 and 0.36 kg kg-1, and in the sub-units, the four load levels applied by the press wheel (C1, C2, C3 e C4), corresponding to 0, 50, 90 and 140 N, respectively, in random blocks deign, with four repetitions. Before the experiment installation, physical attributes of the experimental area were determined: textural analysis, soil water content, soil density, particles density, total porosity and the mechanical soil resistance. After planting, the emergence speed index, the aggregate average diameter in the planted line, the percentage of fines (< 2.0 mm), the minimum, medium and maximum soil density in the seed area, the minimum, medium and maximum soil density profile, and the mechanical soil resistance to the penetration in the planted line. According to the results, the present work allowed conclude that: the loads applied by the press wheel increased the soil density in the vertical planting level beneath the planting depth, when compared with values obtained before the planting; the combination between the loads applied by the press wheel and the soil water contents did not influence the < 2.0 mm percentage and the minimum, medium and maximum soil densities in the seed area; the best plant emergence speed index occurred whit soil water contents of 0.33 kg kg-1 and loads of 86.21 N; using the computerized tomography of non-deformed soil samples, it was possible to quantify minimum, medium and maximum soil density profile, allowing the detailed densities characterization from surface down to the studied depth; the maximum load of 140 N applied by the press wheel on the seed caused a superficial crust of the soil, delaying the plants emergence; soybean planting should not occur without soil compactation around the seed.O condicionamento físico do solo ao redor das sementes reveste-se de grande importância para o bom desenvolvimento inicial da cultura, assegurando uma população adequada de plantas. O adequado contato solosemente é um pré-requisito para a rápida emergência e o bom estabelecimento da cultura. O presente trabalho teve como objetivo estudar os efeitos da combinação entre teores de água do solo e cargas aplicadas pela roda compactadora da semeadora-adubadora sobre o contato solo-semente, em sistema de plantio direto na cultura da soja. Utilizou-se o esquema de parcelas subdivididas, em que as parcelas constituíram os três teores de água (U1, U2 e U3), correspondentes a 0,27, 0,31 e 0,36 kg kg-1, respectivamente, e as subparcelas, os quatro níveis de carga aplicada pela roda compactadora (C1, C2, C3 e C4), correspondentes a 0, 50, 90 e 140 N, respectivamente, no delineamento em blocos ao acaso, com quatro repetições. Antes da instalação do experimento foi realizada a caracterização física da área experimental por meio da análise granulométrica, do teor de água do solo, da densidade do solo, densidade de partículas, porosidade total e resistência mecânica do solo à penetração. Após o plantio, foram avaliados o índice de velocidade de emergência de plântulas, o diâmetro médio ponderado dos agregados na linha de semeadura, a porcentagem de finos < 2,0 mm, as densidades mínima, média e máxima do solo na região da semente, os perfis de densidade mínima, média e máxima do solo e a resistência mecânica do solo à penetração na linha de semeadura. De acordo com os resultados obtidos, pode-se concluir que: as cargas aplicadas pela roda compactadora elevaram a densidade do solo no plano vertical da linha de semeadura abaixo da profundidade de semeadura, quando comparada com os valores obtidos antes do plantio; a combinação entre cargas aplicadas pela roda compactadora e os teores de água no solo não influenciaram a porcentagem de finos < 2,0 mm e as densidades mínima, média e máxima do solo na região da semente; o maior índice de velocidade de emergência (IVE) ocorreu no teor de água igual a 0,33 kg kg-1 e na carga de 86,21 N; a utilização da tomografia computadorizada em amostras indeformadas de solo possibilitou quantificar os perfis das densidades mínima, média e máxima do solo, permitindo a caracterização das densidades desde a superfície até a profundidade analisada; a carga máxima de 140 N aplicada pela roda compactadora sobre a semente causou encrostamento superficial do solo, retardando a emergência das plântulas; e o plantio da soja não deve ser realizado sem compactação do solo sobre a semente.Conselho Nacional de Desenvolvimento Científico e Tecnológicoapplication/pdfporUniversidade Federal de ViçosaDoutorado em Engenharia AgrícolaUFVBRConstruções rurais e ambiência; Energia na agricultura; Mecanização agrícola; Processamento de produMicromorfologiaPlantio diretoMáquinas agrícolasSolosCompactaçãoMicromorphologyDirect planting systemAgricultural machinerySoil compactationCNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA::MAQUINAS E IMPLEMENTOS AGRICOLASEfeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da sojaEffect of water content and load applied by the press wheel on the soil-seed environment in the soybean direct planting systeminfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisinfo:eu-repo/semantics/openAccessreponame:LOCUS Repositório Institucional da UFVinstname:Universidade Federal de Viçosa (UFV)instacron:UFVORIGINALtexto completo.pdfapplication/pdf1193674https://locus.ufv.br//bitstream/123456789/630/1/texto%20completo.pdf8f9d825847d20982e685dd09c496d2f8MD51TEXTtexto completo.pdf.txttexto completo.pdf.txtExtracted texttext/plain136391https://locus.ufv.br//bitstream/123456789/630/2/texto%20completo.pdf.txta57cd3d9ad1da2f14c5f4fac286730b3MD52THUMBNAILtexto completo.pdf.jpgtexto completo.pdf.jpgIM Thumbnailimage/jpeg3758https://locus.ufv.br//bitstream/123456789/630/3/texto%20completo.pdf.jpg52142d6fa98d02ab2ba3f78bbfb121b1MD53123456789/6302016-04-06 23:10:38.959oai:locus.ufv.br:123456789/630Repositório InstitucionalPUBhttps://www.locus.ufv.br/oai/requestfabiojreis@ufv.bropendoar:21452016-04-07T02:10:38LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV)false |
dc.title.por.fl_str_mv |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
dc.title.alternative.eng.fl_str_mv |
Effect of water content and load applied by the press wheel on the soil-seed environment in the soybean direct planting system |
title |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
spellingShingle |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja Modolo, Alcir José Micromorfologia Plantio direto Máquinas agrícolas Solos Compactação Micromorphology Direct planting system Agricultural machinery Soil compactation CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA::MAQUINAS E IMPLEMENTOS AGRICOLAS |
title_short |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
title_full |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
title_fullStr |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
title_full_unstemmed |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
title_sort |
Efeito da umidade do solo e carga aplicada pela roda compactadora no ambiente solo-semente em sistema de plantio direto na cultura da soja |
author |
Modolo, Alcir José |
author_facet |
Modolo, Alcir José |
author_role |
author |
dc.contributor.authorLattes.por.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4766077Y7 |
dc.contributor.author.fl_str_mv |
Modolo, Alcir José |
dc.contributor.advisor-co1.fl_str_mv |
Schaefer, Carlos Ernesto Gonçalves Reynaud |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4723204Y8 |
dc.contributor.advisor1.fl_str_mv |
Fernandes, Haroldo Carlos |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4761460E6 |
dc.contributor.referee1.fl_str_mv |
Teixeira, Mauri Martins |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783316J8 |
dc.contributor.referee2.fl_str_mv |
Araújo, Eduardo Fontes |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787131J6 |
dc.contributor.referee3.fl_str_mv |
Araújo, Roberto Fontes |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785502H8 |
contributor_str_mv |
Schaefer, Carlos Ernesto Gonçalves Reynaud Fernandes, Haroldo Carlos Teixeira, Mauri Martins Araújo, Eduardo Fontes Araújo, Roberto Fontes |
dc.subject.por.fl_str_mv |
Micromorfologia Plantio direto Máquinas agrícolas Solos Compactação |
topic |
Micromorfologia Plantio direto Máquinas agrícolas Solos Compactação Micromorphology Direct planting system Agricultural machinery Soil compactation CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA::MAQUINAS E IMPLEMENTOS AGRICOLAS |
dc.subject.eng.fl_str_mv |
Micromorphology Direct planting system Agricultural machinery Soil compactation |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA::MAQUINAS E IMPLEMENTOS AGRICOLAS |
description |
The soil s physical conditioning around the seeds is important to the initial cultivation development and to assure an adequate plant population. An appropriate soil-seed contact is required to a rapid emergence and a good effectiveness of cultivation. The present work aimed to study the effects of the combination between the soil water contents of the soil and the loads applied by the press wheel of seed drills on the soil-seed contact in a system of direct planting cultivated with soybean. The experiment was made as subdivided design, where units had three soil water contents (U1, U2 e U3) corresponding to 0.27, 0.31 and 0.36 kg kg-1, and in the sub-units, the four load levels applied by the press wheel (C1, C2, C3 e C4), corresponding to 0, 50, 90 and 140 N, respectively, in random blocks deign, with four repetitions. Before the experiment installation, physical attributes of the experimental area were determined: textural analysis, soil water content, soil density, particles density, total porosity and the mechanical soil resistance. After planting, the emergence speed index, the aggregate average diameter in the planted line, the percentage of fines (< 2.0 mm), the minimum, medium and maximum soil density in the seed area, the minimum, medium and maximum soil density profile, and the mechanical soil resistance to the penetration in the planted line. According to the results, the present work allowed conclude that: the loads applied by the press wheel increased the soil density in the vertical planting level beneath the planting depth, when compared with values obtained before the planting; the combination between the loads applied by the press wheel and the soil water contents did not influence the < 2.0 mm percentage and the minimum, medium and maximum soil densities in the seed area; the best plant emergence speed index occurred whit soil water contents of 0.33 kg kg-1 and loads of 86.21 N; using the computerized tomography of non-deformed soil samples, it was possible to quantify minimum, medium and maximum soil density profile, allowing the detailed densities characterization from surface down to the studied depth; the maximum load of 140 N applied by the press wheel on the seed caused a superficial crust of the soil, delaying the plants emergence; soybean planting should not occur without soil compactation around the seed. |
publishDate |
2006 |
dc.date.available.fl_str_mv |
2006-12-01 2015-03-26T12:31:02Z |
dc.date.issued.fl_str_mv |
2006-06-05 |
dc.date.accessioned.fl_str_mv |
2015-03-26T12:31:02Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MODOLO, Alcir José. Effect of water content and load applied by the press wheel on the soil-seed environment in the soybean direct planting system. 2006. 97 f. Tese (Doutorado em Construções rurais e ambiência; Energia na agricultura; Mecanização agrícola; Processamento de produ) - Universidade Federal de Viçosa, Viçosa, 2006. |
dc.identifier.uri.fl_str_mv |
http://locus.ufv.br/handle/123456789/630 |
identifier_str_mv |
MODOLO, Alcir José. Effect of water content and load applied by the press wheel on the soil-seed environment in the soybean direct planting system. 2006. 97 f. Tese (Doutorado em Construções rurais e ambiência; Energia na agricultura; Mecanização agrícola; Processamento de produ) - Universidade Federal de Viçosa, Viçosa, 2006. |
url |
http://locus.ufv.br/handle/123456789/630 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.publisher.program.fl_str_mv |
Doutorado em Engenharia Agrícola |
dc.publisher.initials.fl_str_mv |
UFV |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Construções rurais e ambiência; Energia na agricultura; Mecanização agrícola; Processamento de produ |
publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.source.none.fl_str_mv |
reponame:LOCUS Repositório Institucional da UFV instname:Universidade Federal de Viçosa (UFV) instacron:UFV |
instname_str |
Universidade Federal de Viçosa (UFV) |
instacron_str |
UFV |
institution |
UFV |
reponame_str |
LOCUS Repositório Institucional da UFV |
collection |
LOCUS Repositório Institucional da UFV |
bitstream.url.fl_str_mv |
https://locus.ufv.br//bitstream/123456789/630/1/texto%20completo.pdf https://locus.ufv.br//bitstream/123456789/630/2/texto%20completo.pdf.txt https://locus.ufv.br//bitstream/123456789/630/3/texto%20completo.pdf.jpg |
bitstream.checksum.fl_str_mv |
8f9d825847d20982e685dd09c496d2f8 a57cd3d9ad1da2f14c5f4fac286730b3 52142d6fa98d02ab2ba3f78bbfb121b1 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV) |
repository.mail.fl_str_mv |
fabiojreis@ufv.br |
_version_ |
1798053156973707264 |