Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração

Detalhes bibliográficos
Autor(a) principal: Saraiva, Leonardo Nogueira
Data de Publicação: 2009
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Biblioteca Digital de Teses e Dissertações da USC
Texto Completo: http://localhost:8080/tede/handle/tede/66
Resumo: This work aimed to analyze the marginal discrepancy and the resistance to traction remotion of precast columns to cemented prosthesis to implants, over the influence of the type and amount of retention, located on the axial wall of these implants. In order to do that, three groups were created: G1-Flat (Control), G2- Retention in the groove and G3- Retention in Slice. Groups G2 and G3 were divided then in six subgroups (three for each group), according to the amount of retention found on the column , ranging from one (a) , two (b) and three (c) for the same type of retentive. Waxed copings were also used over the columns and they were casted in cobalt-chromium alloy. For cementation, the cementing agent Temp Bond-Kerr was used, manipulated and added to copings according to the manufacturer's instructions. The marginal misfit was measured with an optical microscope before and after cementation. In order to carry out resistance tests to traction remotion, a universal testing machine with traction speed of 0.5 mm / min was used. The obtained results were analyzed by analysis of variance and Tukey s test, showing that when the number of deductions is increased, the marginal misfit is increased as well, except the 2nd subgroup (one groove), which had no statistically significant difference from the G1. G3 had the highest mean marginal discrepancy. Concerning the resistance to removal by traction, there was no significant difference between G1 and G2. G3 also showed greater increase when compared to other groups, however, its subgroups showed no significant difference between them.
id USC_8ee1eee6973fe235f566d23d03432ab1
oai_identifier_str oai:localhost:tede/66
network_acronym_str USC
network_name_str Biblioteca Digital de Teses e Dissertações da USC
repository_id_str
spelling Francischone, Leda AparecidaCPF:06175983807http://lattes.cnpq.br/1423180913620381CPF:73484962372http://lattes.cnpq.br/6415214315347501Saraiva, Leonardo Nogueira2015-09-14T10:14:09Z2011-12-092009-02-10SARAIVA, Leonardo Nogueira. Analysis of the influence of the type and number of retention the pillar of cemented prosthesis on the implant on the marginal discrepancies and resistance to removal by traction. 2009. 33 f. Dissertação (Mestrado em Biologia Oral - Implantologia) - IASCJ - Universidade Sagrado Coração, Bauru, 2009.http://localhost:8080/tede/handle/tede/66This work aimed to analyze the marginal discrepancy and the resistance to traction remotion of precast columns to cemented prosthesis to implants, over the influence of the type and amount of retention, located on the axial wall of these implants. In order to do that, three groups were created: G1-Flat (Control), G2- Retention in the groove and G3- Retention in Slice. Groups G2 and G3 were divided then in six subgroups (three for each group), according to the amount of retention found on the column , ranging from one (a) , two (b) and three (c) for the same type of retentive. Waxed copings were also used over the columns and they were casted in cobalt-chromium alloy. For cementation, the cementing agent Temp Bond-Kerr was used, manipulated and added to copings according to the manufacturer's instructions. The marginal misfit was measured with an optical microscope before and after cementation. In order to carry out resistance tests to traction remotion, a universal testing machine with traction speed of 0.5 mm / min was used. The obtained results were analyzed by analysis of variance and Tukey s test, showing that when the number of deductions is increased, the marginal misfit is increased as well, except the 2nd subgroup (one groove), which had no statistically significant difference from the G1. G3 had the highest mean marginal discrepancy. Concerning the resistance to removal by traction, there was no significant difference between G1 and G2. G3 also showed greater increase when compared to other groups, however, its subgroups showed no significant difference between them.Propôs-se analisar a discrepância marginal e a resistência à remoção por tração de pilares pré-fabricados para próteses cimentadas sobre implantes, sob influência do tipo e da quantidade de retenção, localizados nas paredes axiais dos mesmos. Para isso, formaram-se três grupos: G1 Liso (Controle), G2 Retenção em canaleta e G3 Retenção em slice. Os grupos G2 e G3 foram divididos ainda em seis subgrupos (três para cada grupo), de acordo com a quantidade de retenções encontradas no pilar, variando de um (a), dois (b) e três (c) para o mesmo tipo de forma retentiva. Foram utilizados copings encerados sobre os pilares e fundidos em liga de Cromo-Cobalto. Para cimentação, usamos o agente cimentante Temp Bond-Kerr, manipulado e inserido aos copings de acordo com as instruções do fabricante. O desajuste marginal foi medido com microscópio óptico, antes e após a cimentação. Para a realização dos testes de resistência à remoção por tração, utilizou-se um aparelho de testes universais de tração com velocidade de 0,5mm/min. Os resultados obtidos foram analisados pela Análise de Variância e Teste de Tukey, demonstrando que, aumentando-se o número de retenções, aumentou-se também o desajuste marginal, com exceção do subgrupo 2a (uma canaleta), que não teve diferença estatisticamente significante com o G1. O G3 apresentou as maiores médias de discrepância marginal. Com relação à resistência à remoção por tração, não houve diferença significativa entre G1 e G2. O G3 apresentou também maior aumento quando comparado com os demais grupos, porém, seus subgrupos não apresentaram diferença significante entre si.Made available in DSpace on 2015-09-14T10:14:09Z (GMT). No. of bitstreams: 1 dissertacao_leonardo_nogueira_saraiva.pdf: 970412 bytes, checksum: 9293b54a0e1e353c965bae2c96354878 (MD5) Previous issue date: 2009-02-10application/pdfporIASCJ - Universidade Sagrado CoraçãoImplantologiaUSCBRCiências da Saúde e BiológicasIMPLANTES DENTÁRIOSPRÓTESE SOBRE IMPLANTESPRÓTESES CIMENTADASPILARES DE CIMENTAÇÃODESIGN DE PILARESDENTAL IMPLANTSPROSTHESIS ON IMPLANTSCEMENTED PROSTHESISPILLARS OF CEMENTATIONCOLUMNS DESIGNCIENCIAS DA SAUDE::ODONTOLOGIAAnálise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por traçãoAnalysis of the influence of the type and number of retention the pillar of cemented prosthesis on the implant on the marginal discrepancies and resistance to removal by tractioninfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis1715202039863940245600600600-753428887677182963-2070498469879244349info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da USCinstname:Universidade do Sagrado Coração (USC)instacron:USCORIGINALdissertacao_leonardo_nogueira_saraiva.pdfapplication/pdf970412http://localhost:8080/tede/bitstream/tede/66/1/dissertacao_leonardo_nogueira_saraiva.pdf9293b54a0e1e353c965bae2c96354878MD51tede/662015-10-16 16:42:30.058oai:localhost:tede/66Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.usc.br:8443/http://tede2.usc.br:8080/oai/requestbiblicorjesu@unisagrado.edu.br||normalizacao@usc.bropendoar:2015-10-16T19:42:30Biblioteca Digital de Teses e Dissertações da USC - Universidade do Sagrado Coração (USC)false
dc.title.por.fl_str_mv Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
dc.title.alternative.eng.fl_str_mv Analysis of the influence of the type and number of retention the pillar of cemented prosthesis on the implant on the marginal discrepancies and resistance to removal by traction
title Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
spellingShingle Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
Saraiva, Leonardo Nogueira
IMPLANTES DENTÁRIOS
PRÓTESE SOBRE IMPLANTES
PRÓTESES CIMENTADAS
PILARES DE CIMENTAÇÃO
DESIGN DE PILARES
DENTAL IMPLANTS
PROSTHESIS ON IMPLANTS
CEMENTED PROSTHESIS
PILLARS OF CEMENTATION
COLUMNS DESIGN
CIENCIAS DA SAUDE::ODONTOLOGIA
title_short Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
title_full Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
title_fullStr Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
title_full_unstemmed Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
title_sort Análise da influência do tipo e número de retenções no pilar de prótese cimentada sobre implante na discrepância marginal e resistência à remoção por tração
author Saraiva, Leonardo Nogueira
author_facet Saraiva, Leonardo Nogueira
author_role author
dc.contributor.advisor1.fl_str_mv Francischone, Leda Aparecida
dc.contributor.advisor1ID.fl_str_mv CPF:06175983807
dc.contributor.advisor1Lattes.fl_str_mv http://lattes.cnpq.br/1423180913620381
dc.contributor.authorID.fl_str_mv CPF:73484962372
dc.contributor.authorLattes.fl_str_mv http://lattes.cnpq.br/6415214315347501
dc.contributor.author.fl_str_mv Saraiva, Leonardo Nogueira
contributor_str_mv Francischone, Leda Aparecida
dc.subject.por.fl_str_mv IMPLANTES DENTÁRIOS
PRÓTESE SOBRE IMPLANTES
PRÓTESES CIMENTADAS
PILARES DE CIMENTAÇÃO
DESIGN DE PILARES
topic IMPLANTES DENTÁRIOS
PRÓTESE SOBRE IMPLANTES
PRÓTESES CIMENTADAS
PILARES DE CIMENTAÇÃO
DESIGN DE PILARES
DENTAL IMPLANTS
PROSTHESIS ON IMPLANTS
CEMENTED PROSTHESIS
PILLARS OF CEMENTATION
COLUMNS DESIGN
CIENCIAS DA SAUDE::ODONTOLOGIA
dc.subject.eng.fl_str_mv DENTAL IMPLANTS
PROSTHESIS ON IMPLANTS
CEMENTED PROSTHESIS
PILLARS OF CEMENTATION
COLUMNS DESIGN
dc.subject.cnpq.fl_str_mv CIENCIAS DA SAUDE::ODONTOLOGIA
description This work aimed to analyze the marginal discrepancy and the resistance to traction remotion of precast columns to cemented prosthesis to implants, over the influence of the type and amount of retention, located on the axial wall of these implants. In order to do that, three groups were created: G1-Flat (Control), G2- Retention in the groove and G3- Retention in Slice. Groups G2 and G3 were divided then in six subgroups (three for each group), according to the amount of retention found on the column , ranging from one (a) , two (b) and three (c) for the same type of retentive. Waxed copings were also used over the columns and they were casted in cobalt-chromium alloy. For cementation, the cementing agent Temp Bond-Kerr was used, manipulated and added to copings according to the manufacturer's instructions. The marginal misfit was measured with an optical microscope before and after cementation. In order to carry out resistance tests to traction remotion, a universal testing machine with traction speed of 0.5 mm / min was used. The obtained results were analyzed by analysis of variance and Tukey s test, showing that when the number of deductions is increased, the marginal misfit is increased as well, except the 2nd subgroup (one groove), which had no statistically significant difference from the G1. G3 had the highest mean marginal discrepancy. Concerning the resistance to removal by traction, there was no significant difference between G1 and G2. G3 also showed greater increase when compared to other groups, however, its subgroups showed no significant difference between them.
publishDate 2009
dc.date.issued.fl_str_mv 2009-02-10
dc.date.available.fl_str_mv 2011-12-09
dc.date.accessioned.fl_str_mv 2015-09-14T10:14:09Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv SARAIVA, Leonardo Nogueira. Analysis of the influence of the type and number of retention the pillar of cemented prosthesis on the implant on the marginal discrepancies and resistance to removal by traction. 2009. 33 f. Dissertação (Mestrado em Biologia Oral - Implantologia) - IASCJ - Universidade Sagrado Coração, Bauru, 2009.
dc.identifier.uri.fl_str_mv http://localhost:8080/tede/handle/tede/66
identifier_str_mv SARAIVA, Leonardo Nogueira. Analysis of the influence of the type and number of retention the pillar of cemented prosthesis on the implant on the marginal discrepancies and resistance to removal by traction. 2009. 33 f. Dissertação (Mestrado em Biologia Oral - Implantologia) - IASCJ - Universidade Sagrado Coração, Bauru, 2009.
url http://localhost:8080/tede/handle/tede/66
dc.language.iso.fl_str_mv por
language por
dc.relation.program.fl_str_mv 1715202039863940245
dc.relation.confidence.fl_str_mv 600
600
600
dc.relation.department.fl_str_mv -753428887677182963
dc.relation.cnpq.fl_str_mv -2070498469879244349
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv IASCJ - Universidade Sagrado Coração
dc.publisher.program.fl_str_mv Implantologia
dc.publisher.initials.fl_str_mv USC
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Ciências da Saúde e Biológicas
publisher.none.fl_str_mv IASCJ - Universidade Sagrado Coração
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações da USC
instname:Universidade do Sagrado Coração (USC)
instacron:USC
instname_str Universidade do Sagrado Coração (USC)
instacron_str USC
institution USC
reponame_str Biblioteca Digital de Teses e Dissertações da USC
collection Biblioteca Digital de Teses e Dissertações da USC
bitstream.url.fl_str_mv http://localhost:8080/tede/bitstream/tede/66/1/dissertacao_leonardo_nogueira_saraiva.pdf
bitstream.checksum.fl_str_mv 9293b54a0e1e353c965bae2c96354878
bitstream.checksumAlgorithm.fl_str_mv MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da USC - Universidade do Sagrado Coração (USC)
repository.mail.fl_str_mv biblicorjesu@unisagrado.edu.br||normalizacao@usc.br
_version_ 1797410243630596096