Thermo-hydraulic Simulation of AP1000 Nuclear Reactor Fuel Assembly

• Autor(a) principal: Acosta Martínez, Leonardo
• Data de Publicação: 2021
• Outros Autores: García Hernández, Carlos Rafael, Rosales García, Jesus, Ortiz Puentes, Annie
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Vetor (Online)
• Texto Completo: https://periodicos.furg.br/vetor/article/view/13576
• topic: Thermohydraulic; CFD Simulation; AP1000 Nuclear Reactor; Termo-hidráulica; Simulação CFD; Reator Nuclear AP1000

One of the challenges of future nuclear power is the development of safer and more efficient nuclear reactor designs. The AP1000 reactor based on the PWR concept of generation III + has several advantages, which can be summarized as: a modular construction, which facilitates its manufacture in series reducing the total construction time, simplification of the different systems, reduction of the initial capital investment and improvement of safety through the implementation of passive emergency systems. Being a novel design it is important to study the thermohydraulic behavior of the core applying the most modern tools. To determine the thermohydraulic behavior of a typical AP1000 fuel assembly, a computational model based on CFD was developed. A coupled neutronic-thermohydraulic calculation was performed, allowing to obtain the axial power distribution in the typical fuel assembly. The geometric model built used the certified dimensions for this type of installation that appear in the corresponding manuals. The thermohydraulic study used the CFD-based program ANSYS-CFX, considering an eighth of the fuel assembly. The neutronic calculation was performed with the program MCNPX version 2.6e. The work shows the results that illustrate the behavior of the temperature and the heat transfer in different zones of the fuel assembly. The results obtained agree with the data reported in the literature, which allowed the verification of the consistency of the developed model.