Analysis of low cycle fatigue in AlMgSi aluminium alloys

• Autor(a) principal: Borrego, L. P.
• Data de Publicação: 2004
• Outros Autores: Abreu, L. M., Costa, J. M., Ferreira, J. M.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10316/4253
• topic: Fatigue testing; Aluminium alloys; Low-cycle fatigue; Fractography; Fatigue markings

In this study low-cycle fatigue tests were performed in two AlMgSi aluminium alloys with different chemical composition, namely 6082-T6 and 6060-T6 alloys, using standard round specimens and tube specimens, respectively. The tests were undertaken in strain control with a strain ratio R[var epsilon]=-1. The cyclic stress-strain curves were determined using one specimen for each imposed strain level. The low-cycle fatigue results are used for the characterisation of the cyclic plastic response and the fatigue live of the alloys. Moreover, the geometry of the hysteresis loops and the occurrence of Masing behaviour are also analysed. The observed behaviour is discussed in terms of the chemical composition of the alloys (Mg2Si hardening particles and Mn dispersoid content) and fracture mechanisms. Alloy 6060-T6 exhibits nearly ideal Masing behaviour, while alloy 6082-T6 presents significant deviations from the Masing model. The type of cyclic deformation behaviour in AlMgSi alloys seems to be influenced by the dispersoid phase.