Influence of cutting direction of cork planks on the quality and porosity characteristics of natural cork stoppers

• Autor(a) principal: Costa, A.
• Data de Publicação: 2010
• Outros Autores: Pereira, Helena
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.5/4684
• topic: cork planks; natural cork stopper; image analysis; quality evaluation; porosity; cutting direction

In the industrial production of natural cork stoppers, cork planks are cut transversely into strips and stoppers are bored in the axial direction, therefore with their cylinder axis parallel to the tree axial direction. The influence of cutting direction of cork planks (transverse or longitudinal), and therefore the orientation of stoppers cylindrical axis (longitudinal or tangential, respectively) on yields, quality profile and porosity characteristics was studied in a random sampling of planks of different quality classes that were bored to produce 45 mm × 24 mm stoppers. The stoppers quality profile and production values were not influenced by the cutting direction, although in good quality planks (1st/2nd) the longitudinal cut led to a higher proportion of good quality stoppers in comparison to the transversal cut, 32% vs. 23%. Regarding porosity characteristics, pore orientation differed between the two cutting directions but not the porosity coefficient, with the exception of the poor quality classes