Gibbs sampling detection for large MIMO and MTC uplinks with adaptive modulation

• Autor(a) principal: Rosário, F.
• Data de Publicação: 2022
• Outros Autores: Monteiro, F. A.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10071/24659
• topic: Gibbs sampling; Large MIMO detection; Adaptively modulated MIMO; MTC

Wireless networks beyond 5G will mostly be serving myriads of sensors and other machine-type communications (MTC), with each device having different requirements in respect to latency, error rate, energy consumption, spectral efficiency or other specifications. Multiple-input multiple-output (MIMO) systems remain a central technology towards 6G, and in cases where massive antenna arrays or cell-free networks are not possible to deploy and only moderately large antenna arrays are allowed, the detection problem at the base-station cannot rely on zero-forcing or matched filters and more complex detection schemes have to be used. The main challenge is to find low complexity, hardware feasible methods that are able to attain near optimal performance. Randomized algorithms based on Gibbs sampling (GS) were proven to perform very close to the optimal detection, even for moderately large antenna arrays, while yielding an acceptable number of operations. However, their performance is highly dependent on the chosen “temperature” parameter (TP). In this paper, we propose and study an optimized variant of the GS method, denoted by triple mixed GS, and where three distinct values for the TP are considered. The method exhibits faster convergence rates than the existing ones in the literature, hence requiring fewer iterations to achieve a target bit error rate. The proposed detector is suitable for symmetric large MIMO systems, however the proposed fixed complexity detector is highly suitable to spectrally efficient adaptively modulated MIMO (AM-MIMO) systems where different types of devices upload information at different bit rates or have different requirements regarding spectral efficiency. The proposed receiver is shown to attain quasi-optimal performance in both scenarios.