Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires

Detalhes bibliográficos
Autor(a) principal: Nascimento, Micael
Data de Publicação: 2020
Outros Autores: Inácio, Patrick, Paixão, Tiago, Camacho, Edgar, Novais, Susana, Santos, Telmo G., Fernandes, Francisco Manuel Braz, Pinto, João L.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10362/114680
Resumo: POCI-01-0145-FEDER-016414 (FIBR3D) BI/UI96/6642/2018 BI/UI96/6643/2018 PD/BD/128265/2016 UID/CTM/50025/2019 UIDB/00667/2020 FCT-SFRH/BD/146885/2019 UIDB/50025/2020 UIDP/50025/2020
id RCAP_aacabca9c41cfe19af021cafb95177d6
oai_identifier_str oai:run.unl.pt:10362/114680
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wiresHybrid processesMaterial extrusionOptical fiber sensorsTemperature and strain monitoringAnalytical ChemistryBiochemistryAtomic and Molecular Physics, and OpticsInstrumentationElectrical and Electronic EngineeringPOCI-01-0145-FEDER-016414 (FIBR3D) BI/UI96/6642/2018 BI/UI96/6643/2018 PD/BD/128265/2016 UID/CTM/50025/2019 UIDB/00667/2020 FCT-SFRH/BD/146885/2019 UIDB/50025/2020 UIDP/50025/2020This paper focuses on three main issues regarding Material Extrusion (MEX) Additive Manufacturing (AM) of thermoplastic composites reinforced by pre-functionalized continuous Nickel–Titanium (NiTi) wires: (i) Evaluation of the effect of the MEX process on the properties of the pre-functionalized NiTi, (ii) evaluation of the mechanical and thermal behavior of the composite material during usage, (iii) the inspection of the parts by Non-Destructive Testing (NDT). For this purpose, an optical fiber sensing network, based on fiber Bragg grating and a cascaded optical fiber sensor, was successfully embedded during the 3D printing of a polylactic acid (PLA) matrix reinforced by NiTi wires. Thermal and mechanical perturbations were successfully registered as a consequence of thermal and mechanical stimuli. During a heating/cooling cycle, a maximum contraction of ≈100 µm was detected by the cascaded sensor in the PLA material at the end of the heating step (induced by Joule effect) of NiTi wires and a thermal perturbation associated with the structural transformation of austenite to R-phase was observed during the natural cooling step, near 33.0◦ C. Regarding tensile cycling tests, higher increases in temperature arose when the applied force ranged between 0.7 and 1.1 kN, reaching a maximum temperature variation of 9.5 ± 0.1◦ C. During the unload step, a slope change in the temperature behavior was detected, which is associated with the material transformation of the NiTi wire (martensite to austenite). The embedded optical sensing methodology presented here proved to be an effective and precise tool to identify structural transformations regarding the specific application as a Non-Destructive Testing for AM.UNIDEMI - Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e IndustrialDEMI - Departamento de Engenharia Mecânica e IndustrialCENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N)DCM - Departamento de Ciência dos MateriaisRUNNascimento, MicaelInácio, PatrickPaixão, TiagoCamacho, EdgarNovais, SusanaSantos, Telmo G.Fernandes, Francisco Manuel BrazPinto, João L.2021-03-29T22:22:39Z2020-02-192020-02-19T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/10362/114680eng1424-8220PURE: 17579504https://doi.org/10.3390/s20041122info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-03-11T04:57:19Zoai:run.unl.pt:10362/114680Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T03:42:35.951986Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
title Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
spellingShingle Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
Nascimento, Micael
Hybrid processes
Material extrusion
Optical fiber sensors
Temperature and strain monitoring
Analytical Chemistry
Biochemistry
Atomic and Molecular Physics, and Optics
Instrumentation
Electrical and Electronic Engineering
title_short Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
title_full Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
title_fullStr Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
title_full_unstemmed Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
title_sort Embedded fiber sensors to monitor temperature and strain of polymeric parts fabricated by additive manufacturing and reinforced with NiTi wires
author Nascimento, Micael
author_facet Nascimento, Micael
Inácio, Patrick
Paixão, Tiago
Camacho, Edgar
Novais, Susana
Santos, Telmo G.
Fernandes, Francisco Manuel Braz
Pinto, João L.
author_role author
author2 Inácio, Patrick
Paixão, Tiago
Camacho, Edgar
Novais, Susana
Santos, Telmo G.
Fernandes, Francisco Manuel Braz
Pinto, João L.
author2_role author
author
author
author
author
author
author
dc.contributor.none.fl_str_mv UNIDEMI - Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial
DEMI - Departamento de Engenharia Mecânica e Industrial
CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N)
DCM - Departamento de Ciência dos Materiais
RUN
dc.contributor.author.fl_str_mv Nascimento, Micael
Inácio, Patrick
Paixão, Tiago
Camacho, Edgar
Novais, Susana
Santos, Telmo G.
Fernandes, Francisco Manuel Braz
Pinto, João L.
dc.subject.por.fl_str_mv Hybrid processes
Material extrusion
Optical fiber sensors
Temperature and strain monitoring
Analytical Chemistry
Biochemistry
Atomic and Molecular Physics, and Optics
Instrumentation
Electrical and Electronic Engineering
topic Hybrid processes
Material extrusion
Optical fiber sensors
Temperature and strain monitoring
Analytical Chemistry
Biochemistry
Atomic and Molecular Physics, and Optics
Instrumentation
Electrical and Electronic Engineering
description POCI-01-0145-FEDER-016414 (FIBR3D) BI/UI96/6642/2018 BI/UI96/6643/2018 PD/BD/128265/2016 UID/CTM/50025/2019 UIDB/00667/2020 FCT-SFRH/BD/146885/2019 UIDB/50025/2020 UIDP/50025/2020
publishDate 2020
dc.date.none.fl_str_mv 2020-02-19
2020-02-19T00:00:00Z
2021-03-29T22:22:39Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10362/114680
url http://hdl.handle.net/10362/114680
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 1424-8220
PURE: 17579504
https://doi.org/10.3390/s20041122
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799138036976451584

Registros relacionados