Double-sided injection lap riveting

• Autor(a) principal: Pragana, João
• Data de Publicação: 2023
• Outros Autores: Sampaio, Rui F. V., Chantreuil, Justin, Bragança, Ivo, Silva, Carlos, Martins, Paulo
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.21/16086
• topic: Joining by plastic deformation; Double-sided injection lap riveting; Thermo-electrical resistance; Finite element method; Experimentation

This article presents a double-sided injection lap riveting process for fixing two overlapped sheets with tubular rivets at room temperature. The rivets are injected by compression into the dovetail ring holes that are previously machined in both sheets, and, in contrast to other joining by plastic deformation processes making use of auxiliary elements, the resulting joints are hidden inside the sheets without material protrusions above or below their surfaces. The new process is applied in the fabrication of aluminum busbar joints for energy distribution systems, and comparisons are made against conventional bolted joints that were fabricated for reference purposes. The work combines experimentation and finite element modelling, and results allow concluding that, in addition to invisibility and savings in assembly space, there are important gains in the thermo-electrical performance of the new joints that are of paramount importance for electric distribution applications.