Local induction heating capabilities of zeolites charged with metal and oxide MNPs for application in HDPE hydrocracking: a proof of concept

• Autor(a) principal: Muñoz, Marta
• Data de Publicação: 2021
• Outros Autores: Morales Casero, Irene, Costa, Cátia S., Multigner, Marta, De La Presa, Patricia, Alonso, Jose M., Silva, João, Ribeiro, M. Rosário, Torres, Belén, Rams, Joaquin
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.21/12995
• topic: zeolite; plastic waste; hydrocracking; hyperthermia; magnetic nanoparticles (MNPs); electromagnetic fields

Zeolites are widely used in high-temperature oil refining processes such as fluid catalytic cracking (FCC), hydrocracking, and aromatization. Significant energy cost are associated with these processes due to the high temperatures required. The induction heating promoted by magnetic nanoparticles (MNPs) under radio frequency fields could contribute to solving this problem by providing a supplementary amount of heat in a nano-localized way, just at the active centre site where the catalytic process takes place. In this study, the potential of such a complementary route to reducing energetic requirements is evaluated. The catalytic cracking reaction under a hydrogen atmosphere (hydrocracking) applied to the conversion of plastics was taken as an application example. Thus, a commercial zeolite catalyst (H-USY) was impregnated with three different magnetic nanoparticles: nickel (Ni), cobalt (Co), maghemite (γ-Fe2O3 ), and their combinations and subjected to electromagnetic fields. Temperature increases of approximately 80 ◦C were measured for H-USY zeolite impregnated with γ-Fe2O3 and Ni-γ-Fe2O3 due to the heat released under the radio frequency fields. The potential of the resulting MNPs derived catalyst for HDPE (high-density polyethylene) conversion was also evaluated by thermogravimetric analysis (TGA) under hydrogen atmosphere. This study is a proof of concept to show that induction heating could be used in combination with traditional resistive heating as an additional energy supplier, thereby providing an interesting alternative in line with a greener technology.