AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações do UNICENTRO |
Texto Completo: | http://localhost:8080/tede/handle/tede/475 |
Resumo: | The subsoil is a tillage operation was consolidated in forest area due to its beneficial to plants and operational advantages effects. But there are several questions about what ideal to be used in each condition of the soil and the depth to be imaged equipment?This study aimed to perform an operational and quality assessment of mechanical preparation in different soils and depths for forest deployment. Data were collected in the company`s operating areas of Klabin SA, located in the municipality of Telemaco Borba, PR. The was studied a mechanical preparation system with a Crawler tractor equipped with subsoiler. Sample plots were located in forest areas covering two soil: Latossolo Vermelho a very clayey soil (soil A) and Latossolo Vermelho Amarelo typic sandy texture (soil B). The treatments were the working depths subsoiler 40 and 50 cm in soil (SA-40 and SB-50) and the same depth to the soil B (SB-40 and SB-50). Initially it was determined the mechanical availability, operational efficiency and productivity of the equipment in the implementation of mechanized preparation of the soil. Quality data were analyzed with the use of quality control tools such as histograms and control charts . The results showed that there wasn`t significant changes (p < 0.05) in mechanical availability, operational efficiency and productivity in the depths of assessed work in the same soil A or B. Both soils had PR values above the critical value (2 MPa) in the layer 0-40 cm depth, in the pre subsoiling moment. The distance class that showed higher soil resistance to penetration was 0 50 cm. This fact is explained to increased traffic of harvesting machines on the edge of the stand. The depth and groove format were under the control of the process of soil preparation for the treatments SA- 40 and SA-50 , and lack of control for the treatments SB-40 and SB-50. The percentage of depth measurements in the center of the groove, which reached the company`s specified limit (50 cm for clayey soils), was 22.6 and 40.6 % for the SA-40 and SA-50 treatments, respectively. In soil B, this percentage was 55. 0 and 84.6 % for SB-40 and SB-50, with the limit set by the company was 40 cm for sandy soils respectively. |
id |
UCEN_44167e0bd10a80e07934e82156940932 |
---|---|
oai_identifier_str |
oai:localhost:tede/475 |
network_acronym_str |
UCEN |
network_name_str |
Biblioteca Digital de Teses e Dissertações do UNICENTRO |
repository_id_str |
|
spelling |
Fiedler, Nilton CésarCPF:37738377389http://lattes.cnpq.br/8699171075880935Cavalieri, Karina Maria VieiraCPF:00000000068http://lattes.cnpq.br/1075566033486927Lopes, Eduardo da SilvaCPF:833883833838http://lattes.cnpq.br/1280835655867163CPF:11164903748http://lattes.cnpq.br/2901108215732199Gonçalves, Saulo Boldrini2016-09-20T12:30:00Z2015-08-102014-03-10GONÇALVES, Saulo Boldrini. AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO. 2014. 81 f. Dissertação (Mestrado em Manejo Florestal) - UNICENTRO - Universidade Estadual do Centro Oeste, Irati, 2014.http://localhost:8080/tede/handle/tede/475The subsoil is a tillage operation was consolidated in forest area due to its beneficial to plants and operational advantages effects. But there are several questions about what ideal to be used in each condition of the soil and the depth to be imaged equipment?This study aimed to perform an operational and quality assessment of mechanical preparation in different soils and depths for forest deployment. Data were collected in the company`s operating areas of Klabin SA, located in the municipality of Telemaco Borba, PR. The was studied a mechanical preparation system with a Crawler tractor equipped with subsoiler. Sample plots were located in forest areas covering two soil: Latossolo Vermelho a very clayey soil (soil A) and Latossolo Vermelho Amarelo typic sandy texture (soil B). The treatments were the working depths subsoiler 40 and 50 cm in soil (SA-40 and SB-50) and the same depth to the soil B (SB-40 and SB-50). Initially it was determined the mechanical availability, operational efficiency and productivity of the equipment in the implementation of mechanized preparation of the soil. Quality data were analyzed with the use of quality control tools such as histograms and control charts . The results showed that there wasn`t significant changes (p < 0.05) in mechanical availability, operational efficiency and productivity in the depths of assessed work in the same soil A or B. Both soils had PR values above the critical value (2 MPa) in the layer 0-40 cm depth, in the pre subsoiling moment. The distance class that showed higher soil resistance to penetration was 0 50 cm. This fact is explained to increased traffic of harvesting machines on the edge of the stand. The depth and groove format were under the control of the process of soil preparation for the treatments SA- 40 and SA-50 , and lack of control for the treatments SB-40 and SB-50. The percentage of depth measurements in the center of the groove, which reached the company`s specified limit (50 cm for clayey soils), was 22.6 and 40.6 % for the SA-40 and SA-50 treatments, respectively. In soil B, this percentage was 55. 0 and 84.6 % for SB-40 and SB-50, with the limit set by the company was 40 cm for sandy soils respectively.A subsolagem é uma operação do preparo do solo que se consolidou na área florestal devido a seus efeitos benéficos para as plantas e vantagens operacionais. Mas qual seria o equipamento ideal a ser utilizado em cada condição de solo e qual a profundidade a ser trabalhada? Este trabalho objetivou realizar uma avaliação operacional e de qualidade do preparo mecanizado em diferentes solos e profundidades para a implantação florestal. Os dados foram coletados nas áreas operacionais da empresa Klabin S.A, localizada no município de Telêmaco Borba, PR. Foi estudado o sistema de preparo do solo composto por um trator de esteiras equipado com subsolador. Foram alocadas parcelas amostrais nas áreas florestais contemplando dois solos: Latossolo Vermelho de textura muito argilosa (solo A) e Latossolo Vermelho Amarelo de textura arenosa (solo B). Os tratamentos foram às profundidades de trabalho do subsolador a 40 e 50 cm no solo A (SA-40 e SA-50) e as mesmas profundidades para solo B (SB-40 e SB-50). Inicialmente foi determinado a disponibilidade mecânica, a eficiência operacional e a produtividade do equipamento na execução do preparo mecanizado do solo. Por fim, foi realizado uma avaliação da qualidade da operação de preparo mecanizado do solo, por meio da determinação da resistência do solo à penetração de raízes (RP), profundidade, formato do sulco e distância entre linhas de sulco. Os dados de qualidade foram analisados com uso de ferramentas de controle da qualidade (gráficos de controle e histogramas). Os resultados mostraram que não houve alterações significativas (p<0,05) na disponibilidade mecânica, eficiência operacional e produtividade, nas diferentes profundidades de trabalho avaliadas dentro do mesmo solo. Os solos estudados apresentaram valores de RP acima do valor crítico (2 MPa) na camada de 0 a 40 cm de profundidade no momento antes da subsolagem. A classe de distância que apresentou maior valor de resistência do solo à penetração foi de 0 a 50 cm, explicado pelo maior tráfego das máquinas de colheita na margem do talhão. A profundidade e formato do sulco estavam sob controle do processo de preparo do solo para os tratamentos SA-40 e SA-50. O percentual das medidas de profundidade no centro do sulco, que atingiram o limite especificado pela empresa (50 cm para solos textura muito argilosa), foi de 22,6 e 40,6 % para os tratamentos SA-40 e SA-50 respectivamente. No solo B esse percentual foi de 55,0 e 84,6 % para SB-40 e SB-50, sendo o limite estabelecido pela empresa de 40 cm para solos arenosos respectivamente.Made available in DSpace on 2016-09-20T12:30:00Z (GMT). No. of bitstreams: 1 PR SAULO BOLDRINI GONCALVES.pdf: 1675837 bytes, checksum: 45f80501257b4cb0316b5f602aa98b1e (MD5) Previous issue date: 2014-03-10Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESapplication/pdfhttp://localhost:8080/tede/retrieve/1485/PR%20SAULO%20BOLDRINI%20GONCALVES.pdf.jpgporUNICENTRO - Universidade Estadual do Centro OestePrograma de Pós-Graduação em Ciências Florestais (Mestrado)UNICENTROBRUnicentro::Departamento de Ciências FlorestaisMecanização florestalSubsolagemControle de qualidadeForest mechanizationSubsoilingQuality ControlSILVICULTURA::FLORESTAMENTO E REFLORESTAMENTOCIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTALRECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::MANEJO FLORESTALAVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLOEvaluating the quality of sub soiling in different soil conditionsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis6065515305966967648600600600500500600-5938256993918186975-4784538462405253470-604049389552879283-76664982548871839512075167498588264571info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UNICENTROinstname:Universidade Estadual do Centro-Oeste (UNICENTRO)instacron:UNICENTROORIGINALPR SAULO BOLDRINI GONCALVES.pdfapplication/pdf1675837http://localhost:8080/tede/bitstream/tede/475/1/PR+SAULO+BOLDRINI+GONCALVES.pdf45f80501257b4cb0316b5f602aa98b1eMD51THUMBNAILPR SAULO BOLDRINI GONCALVES.pdf.jpgPR SAULO BOLDRINI GONCALVES.pdf.jpgimage/jpeg3281http://localhost:8080/tede/bitstream/tede/475/2/PR+SAULO+BOLDRINI+GONCALVES.pdf.jpg630a27744d2b07c180cbe944b71bc1aaMD52tede/4752021-02-23 08:19:25.27oai:localhost:tede/475Biblioteca Digital de Teses e Dissertaçõeshttp://tede.unicentro.br:8080/jspui/PUBhttp://tede.unicentro.br/tde_oai/oai3.phprepositorio@unicentro.br||fabianoqueiroz@yahoo.com.bropendoar:2021-02-23T11:19:25Biblioteca Digital de Teses e Dissertações do UNICENTRO - Universidade Estadual do Centro-Oeste (UNICENTRO)false |
dc.title.por.fl_str_mv |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
dc.title.alternative.eng.fl_str_mv |
Evaluating the quality of sub soiling in different soil conditions |
title |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
spellingShingle |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO Gonçalves, Saulo Boldrini Mecanização florestal Subsolagem Controle de qualidade Forest mechanization Subsoiling Quality Control SILVICULTURA::FLORESTAMENTO E REFLORESTAMENTO CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::MANEJO FLORESTAL |
title_short |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
title_full |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
title_fullStr |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
title_full_unstemmed |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
title_sort |
AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO |
author |
Gonçalves, Saulo Boldrini |
author_facet |
Gonçalves, Saulo Boldrini |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Fiedler, Nilton César |
dc.contributor.advisor1ID.fl_str_mv |
CPF:37738377389 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/8699171075880935 |
dc.contributor.advisor-co1.fl_str_mv |
Cavalieri, Karina Maria Vieira |
dc.contributor.advisor-co1ID.fl_str_mv |
CPF:00000000068 |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/1075566033486927 |
dc.contributor.advisor-co2.fl_str_mv |
Lopes, Eduardo da Silva |
dc.contributor.advisor-co2ID.fl_str_mv |
CPF:833883833838 |
dc.contributor.advisor-co2Lattes.fl_str_mv |
http://lattes.cnpq.br/1280835655867163 |
dc.contributor.authorID.fl_str_mv |
CPF:11164903748 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/2901108215732199 |
dc.contributor.author.fl_str_mv |
Gonçalves, Saulo Boldrini |
contributor_str_mv |
Fiedler, Nilton César Cavalieri, Karina Maria Vieira Lopes, Eduardo da Silva |
dc.subject.por.fl_str_mv |
Mecanização florestal Subsolagem Controle de qualidade |
topic |
Mecanização florestal Subsolagem Controle de qualidade Forest mechanization Subsoiling Quality Control SILVICULTURA::FLORESTAMENTO E REFLORESTAMENTO CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::MANEJO FLORESTAL |
dc.subject.eng.fl_str_mv |
Forest mechanization Subsoiling Quality Control |
dc.subject.cnpq.fl_str_mv |
SILVICULTURA::FLORESTAMENTO E REFLORESTAMENTO CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::MANEJO FLORESTAL |
description |
The subsoil is a tillage operation was consolidated in forest area due to its beneficial to plants and operational advantages effects. But there are several questions about what ideal to be used in each condition of the soil and the depth to be imaged equipment?This study aimed to perform an operational and quality assessment of mechanical preparation in different soils and depths for forest deployment. Data were collected in the company`s operating areas of Klabin SA, located in the municipality of Telemaco Borba, PR. The was studied a mechanical preparation system with a Crawler tractor equipped with subsoiler. Sample plots were located in forest areas covering two soil: Latossolo Vermelho a very clayey soil (soil A) and Latossolo Vermelho Amarelo typic sandy texture (soil B). The treatments were the working depths subsoiler 40 and 50 cm in soil (SA-40 and SB-50) and the same depth to the soil B (SB-40 and SB-50). Initially it was determined the mechanical availability, operational efficiency and productivity of the equipment in the implementation of mechanized preparation of the soil. Quality data were analyzed with the use of quality control tools such as histograms and control charts . The results showed that there wasn`t significant changes (p < 0.05) in mechanical availability, operational efficiency and productivity in the depths of assessed work in the same soil A or B. Both soils had PR values above the critical value (2 MPa) in the layer 0-40 cm depth, in the pre subsoiling moment. The distance class that showed higher soil resistance to penetration was 0 50 cm. This fact is explained to increased traffic of harvesting machines on the edge of the stand. The depth and groove format were under the control of the process of soil preparation for the treatments SA- 40 and SA-50 , and lack of control for the treatments SB-40 and SB-50. The percentage of depth measurements in the center of the groove, which reached the company`s specified limit (50 cm for clayey soils), was 22.6 and 40.6 % for the SA-40 and SA-50 treatments, respectively. In soil B, this percentage was 55. 0 and 84.6 % for SB-40 and SB-50, with the limit set by the company was 40 cm for sandy soils respectively. |
publishDate |
2014 |
dc.date.issued.fl_str_mv |
2014-03-10 |
dc.date.available.fl_str_mv |
2015-08-10 |
dc.date.accessioned.fl_str_mv |
2016-09-20T12:30:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
GONÇALVES, Saulo Boldrini. AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO. 2014. 81 f. Dissertação (Mestrado em Manejo Florestal) - UNICENTRO - Universidade Estadual do Centro Oeste, Irati, 2014. |
dc.identifier.uri.fl_str_mv |
http://localhost:8080/tede/handle/tede/475 |
identifier_str_mv |
GONÇALVES, Saulo Boldrini. AVALIAÇÃO DA QUALIDADE DA SUBSOLAGEM EM DIFERENTES CONDIÇÕES DE SOLO. 2014. 81 f. Dissertação (Mestrado em Manejo Florestal) - UNICENTRO - Universidade Estadual do Centro Oeste, Irati, 2014. |
url |
http://localhost:8080/tede/handle/tede/475 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.program.fl_str_mv |
6065515305966967648 |
dc.relation.confidence.fl_str_mv |
600 600 600 500 500 600 |
dc.relation.department.fl_str_mv |
-5938256993918186975 |
dc.relation.cnpq.fl_str_mv |
-4784538462405253470 -604049389552879283 -7666498254887183951 |
dc.relation.sponsorship.fl_str_mv |
2075167498588264571 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
UNICENTRO - Universidade Estadual do Centro Oeste |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Ciências Florestais (Mestrado) |
dc.publisher.initials.fl_str_mv |
UNICENTRO |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Unicentro::Departamento de Ciências Florestais |
publisher.none.fl_str_mv |
UNICENTRO - Universidade Estadual do Centro Oeste |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do UNICENTRO instname:Universidade Estadual do Centro-Oeste (UNICENTRO) instacron:UNICENTRO |
instname_str |
Universidade Estadual do Centro-Oeste (UNICENTRO) |
instacron_str |
UNICENTRO |
institution |
UNICENTRO |
reponame_str |
Biblioteca Digital de Teses e Dissertações do UNICENTRO |
collection |
Biblioteca Digital de Teses e Dissertações do UNICENTRO |
bitstream.url.fl_str_mv |
http://localhost:8080/tede/bitstream/tede/475/1/PR+SAULO+BOLDRINI+GONCALVES.pdf http://localhost:8080/tede/bitstream/tede/475/2/PR+SAULO+BOLDRINI+GONCALVES.pdf.jpg |
bitstream.checksum.fl_str_mv |
45f80501257b4cb0316b5f602aa98b1e 630a27744d2b07c180cbe944b71bc1aa |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações do UNICENTRO - Universidade Estadual do Centro-Oeste (UNICENTRO) |
repository.mail.fl_str_mv |
repositorio@unicentro.br||fabianoqueiroz@yahoo.com.br |
_version_ |
1801859365791072256 |