Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito

Detalhes bibliográficos
Autor(a) principal: Silva, Tássia Neuda de Moraes
Data de Publicação: 2013
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da Universidade Federal de Alagoas (UFAL)
Texto Completo: http://www.repositorio.ufal.br/handle/riufal/3536
Resumo: The Fluid Concrete (FC) is a concrete that has high fluidity, which may allow the filling of molds without the need of mechanical compaction, only under the action of its own weight. As a concrete whole, the FC has low tensile strength, and an alternative to minimize this limitation is the inclusion of fibers to the concrete. The incorporation of fiber reinforced composite and induce tensile stresses. Within this context, this paper aims to provide a contribution to the production of a fluid concrete fiber, rubber and polypropylene and addition of waste from the processing of marble and granite(FFC). The methodology dosage used was Gomes (2002) for obtaining fluid concrete (FC) being adapted for insertion of fiber. To study the properties of compacting tests were carried out in the fresh state, such as scattering, V funnel and box L. To check the mechanical properties tests were performed in the hardened state, such as compression, tensile and modulus of elasticity with cylindrical body-of - proof dimensions of 10cm x 20cm RC and FFC, with fiber content rubber 2.0% polypropylene and 0.25% of the amount by weight of cement. As a result, the SC showed a decrease in scattering maximum diameter with increasing fiber content entered. The compressive strength and modulus of elasticity decreased, since the tensile strength showed an increase when compared to RC. From the results it is concluded that the FFC is not self compacting concrete, but has characteristics of self compacting, the increase in tensile strength indicates a higher ability to absorb impact. The FFC helps reduce scrap waste, reducing the environmental impact by becoming a ecoeffient concrete.
id UFAL_fe35e22e77ff16c6d96decff4cd4dfe4
oai_identifier_str oai:www.repositorio.ufal.br:riufal/3536
network_acronym_str UFAL
network_name_str Repositório Institucional da Universidade Federal de Alagoas (UFAL)
repository_id_str
spelling Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granitoContributions obteining of the self compacting concrete using residue of the marble and granite and study of mechanical propertiesEngenharia civil - EstruturasMateriais compósitosConcreto fluidoFibras de borrachaFibras de polipropilenoCivil Engineering – StructuresComposite materialsConcrete fluidRubber FibersPolypropylene FibersCNPQ::ENGENHARIAS::ENGENHARIA CIVILThe Fluid Concrete (FC) is a concrete that has high fluidity, which may allow the filling of molds without the need of mechanical compaction, only under the action of its own weight. As a concrete whole, the FC has low tensile strength, and an alternative to minimize this limitation is the inclusion of fibers to the concrete. The incorporation of fiber reinforced composite and induce tensile stresses. Within this context, this paper aims to provide a contribution to the production of a fluid concrete fiber, rubber and polypropylene and addition of waste from the processing of marble and granite(FFC). The methodology dosage used was Gomes (2002) for obtaining fluid concrete (FC) being adapted for insertion of fiber. To study the properties of compacting tests were carried out in the fresh state, such as scattering, V funnel and box L. To check the mechanical properties tests were performed in the hardened state, such as compression, tensile and modulus of elasticity with cylindrical body-of - proof dimensions of 10cm x 20cm RC and FFC, with fiber content rubber 2.0% polypropylene and 0.25% of the amount by weight of cement. As a result, the SC showed a decrease in scattering maximum diameter with increasing fiber content entered. The compressive strength and modulus of elasticity decreased, since the tensile strength showed an increase when compared to RC. From the results it is concluded that the FFC is not self compacting concrete, but has characteristics of self compacting, the increase in tensile strength indicates a higher ability to absorb impact. The FFC helps reduce scrap waste, reducing the environmental impact by becoming a ecoeffient concrete.CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorCNPq - Conselho Nacional de Desenvolvimento Científico e TecnológicoDefine-se como Concreto Fluido (CF) um concreto que apresenta abatimento entre 18cm e 25cm. Essa elevada fluidez pode permitir o preenchimento de fôrmas sem que haja necessidade de adensamento mecânico, apenas sob a ação do seu peso próprio. Como todo concreto, o CF possui baixa resistência à tração, e uma alternativa de minimizar essa limitação é a inserção de fibras ao concreto. A incorporação de fibras pode reforçar o compósito e permitir maior absorção de tensões de tração. Dentro deste contexto, o presente trabalho tem como objetivo proporcionar uma contribuição ao estudo de compósitos por meio da produção de um concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento de mármore e granito (CFF). A Metodologia de dosagem utilizada para a obtenção desse concreto foi a de Gomes (2002) estabelecida para concreto autoadensável, com adaptações para inserção das fibras. Para o estudo das propriedades de adensabilidade foram realizados ensaios no estado fresco, tais como: espalhamento, funil V e caixa em L. Para verificação das propriedades mecânicas foram realizados ensaios no estado endurecido, tais como: compressão, tração e módulo de elasticidade, com corpos-de-prova cilíndricos de dimensões de 10cm x 20cm de CR e de CFF, com teor de fibras de borracha de 2,0% e de polipropileno de 0,25% da quantidade de cimento em massa. Como resultados, o CFF apresentou características de autoadensabilidade com um diâmetro máximo de espalhamento de 62,5cm. A resistência à compressão e o módulo de elasticidade apresentou uma redução, já a resistência à tração apresentou um aumento quando comparados ao Concreto de Referencia (CR). Dos resultados conclui-se que o CFF possui características de autoadensabilidade e acréscimo na resistência à tração. O CFF com fibras permitiu a incorporação de um resíduo inservível, reduzindo o impacto ambiental e se caracterizando como um concreto ecoefiente.Universidade Federal de AlagoasBrasilPrograma de Pós-Graduação em Engenharia CivilUFALBarboza , Aline da Silva Ramoshttp://lattes.cnpq.br/4857672279132119Moraes, Karoline Alves de Melohttp://lattes.cnpq.br/3666730659065228Lisbôa, Edvaldo Monteirohttp://lattes.cnpq.br/2351517949804286Jacintho, Ana Elisabete Paganelli Guimarães de Avilahttp://lattes.cnpq.br/8531563804368352Silva, Tássia Neuda de Moraes2018-11-05T17:40:41Z2018-10-222018-11-05T17:40:41Z2013-11-07info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSILVA, Tássia Neuda de Moraes. Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito. 2013. 107 f. Dissertação (Mestrado em Engenharia Civil) – Centro de Tecnologia, Programa de Pós Graduação em Engenharia Civil, Universidade Federal de Alagoas, Maceió, 2018.http://www.repositorio.ufal.br/handle/riufal/3536porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal de Alagoas (UFAL)instname:Universidade Federal de Alagoas (UFAL)instacron:UFAL2018-11-05T17:41:07Zoai:www.repositorio.ufal.br:riufal/3536Repositório InstitucionalPUBhttp://www.repositorio.ufal.br/oai/requestri@sibi.ufal.bropendoar:2018-11-05T17:41:07Repositório Institucional da Universidade Federal de Alagoas (UFAL) - Universidade Federal de Alagoas (UFAL)false
dc.title.none.fl_str_mv Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
Contributions obteining of the self compacting concrete using residue of the marble and granite and study of mechanical properties
title Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
spellingShingle Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
Silva, Tássia Neuda de Moraes
Engenharia civil - Estruturas
Materiais compósitos
Concreto fluido
Fibras de borracha
Fibras de polipropileno
Civil Engineering – Structures
Composite materials
Concrete fluid
Rubber Fibers
Polypropylene Fibers
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
title_short Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
title_full Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
title_fullStr Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
title_full_unstemmed Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
title_sort Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito
author Silva, Tássia Neuda de Moraes
author_facet Silva, Tássia Neuda de Moraes
author_role author
dc.contributor.none.fl_str_mv Barboza , Aline da Silva Ramos
http://lattes.cnpq.br/4857672279132119
Moraes, Karoline Alves de Melo
http://lattes.cnpq.br/3666730659065228
Lisbôa, Edvaldo Monteiro
http://lattes.cnpq.br/2351517949804286
Jacintho, Ana Elisabete Paganelli Guimarães de Avila
http://lattes.cnpq.br/8531563804368352
dc.contributor.author.fl_str_mv Silva, Tássia Neuda de Moraes
dc.subject.por.fl_str_mv Engenharia civil - Estruturas
Materiais compósitos
Concreto fluido
Fibras de borracha
Fibras de polipropileno
Civil Engineering – Structures
Composite materials
Concrete fluid
Rubber Fibers
Polypropylene Fibers
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
topic Engenharia civil - Estruturas
Materiais compósitos
Concreto fluido
Fibras de borracha
Fibras de polipropileno
Civil Engineering – Structures
Composite materials
Concrete fluid
Rubber Fibers
Polypropylene Fibers
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
description The Fluid Concrete (FC) is a concrete that has high fluidity, which may allow the filling of molds without the need of mechanical compaction, only under the action of its own weight. As a concrete whole, the FC has low tensile strength, and an alternative to minimize this limitation is the inclusion of fibers to the concrete. The incorporation of fiber reinforced composite and induce tensile stresses. Within this context, this paper aims to provide a contribution to the production of a fluid concrete fiber, rubber and polypropylene and addition of waste from the processing of marble and granite(FFC). The methodology dosage used was Gomes (2002) for obtaining fluid concrete (FC) being adapted for insertion of fiber. To study the properties of compacting tests were carried out in the fresh state, such as scattering, V funnel and box L. To check the mechanical properties tests were performed in the hardened state, such as compression, tensile and modulus of elasticity with cylindrical body-of - proof dimensions of 10cm x 20cm RC and FFC, with fiber content rubber 2.0% polypropylene and 0.25% of the amount by weight of cement. As a result, the SC showed a decrease in scattering maximum diameter with increasing fiber content entered. The compressive strength and modulus of elasticity decreased, since the tensile strength showed an increase when compared to RC. From the results it is concluded that the FFC is not self compacting concrete, but has characteristics of self compacting, the increase in tensile strength indicates a higher ability to absorb impact. The FFC helps reduce scrap waste, reducing the environmental impact by becoming a ecoeffient concrete.
publishDate 2013
dc.date.none.fl_str_mv 2013-11-07
2018-11-05T17:40:41Z
2018-10-22
2018-11-05T17:40:41Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SILVA, Tássia Neuda de Moraes. Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito. 2013. 107 f. Dissertação (Mestrado em Engenharia Civil) – Centro de Tecnologia, Programa de Pós Graduação em Engenharia Civil, Universidade Federal de Alagoas, Maceió, 2018.
http://www.repositorio.ufal.br/handle/riufal/3536
identifier_str_mv SILVA, Tássia Neuda de Moraes. Contribuições à produção do concreto fluido com fibras de borracha e de polipropileno e adição de resíduos do beneficiamento do mármore e granito. 2013. 107 f. Dissertação (Mestrado em Engenharia Civil) – Centro de Tecnologia, Programa de Pós Graduação em Engenharia Civil, Universidade Federal de Alagoas, Maceió, 2018.
url http://www.repositorio.ufal.br/handle/riufal/3536
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Alagoas
Brasil
Programa de Pós-Graduação em Engenharia Civil
UFAL
publisher.none.fl_str_mv Universidade Federal de Alagoas
Brasil
Programa de Pós-Graduação em Engenharia Civil
UFAL
dc.source.none.fl_str_mv reponame:Repositório Institucional da Universidade Federal de Alagoas (UFAL)
instname:Universidade Federal de Alagoas (UFAL)
instacron:UFAL
instname_str Universidade Federal de Alagoas (UFAL)
instacron_str UFAL
institution UFAL
reponame_str Repositório Institucional da Universidade Federal de Alagoas (UFAL)
collection Repositório Institucional da Universidade Federal de Alagoas (UFAL)
repository.name.fl_str_mv Repositório Institucional da Universidade Federal de Alagoas (UFAL) - Universidade Federal de Alagoas (UFAL)
repository.mail.fl_str_mv ri@sibi.ufal.br
_version_ 1748233734904086528