Modelagem computacional da válvula antecipadora de onda como mecanismo de alívio para o golpe de aríete

• Autor(a) principal: Barbosa, João Marcelo Costa
• Data de Publicação: 2010
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: Repositório Institucional da Universidade Federal do Ceará (UFC)
• Texto Completo: http://www.repositorio.ufc.br/handle/riufc/16834
• topic: Recursos hídricos; Transitórios hidráulicos; Golpe de ariete

In this work was made Hydraulic Transient simulations with anticipation valve with opening and closing complete and non-instantaneous, as a mechanism of relief for water hammer. The valve must be located near the pump. Thus in this work, the valve in advance shall be applied to the second node of the pipelines in question. The software UFC6 was used for estimates the Transient and was produced by the Study Group on Computational Fluid of UFC. Anticipation is a mechanism for relief from water hammer that starts opening when the low pressure of regulation is exceeded, after the passage of the wave of low pressure. The fluid expelled must be placed on a spring or stored in a reservoir in order to accommodate the volume of fluid to be expelled. In this work, the Anticipation Valve is modeling into the water as a fluid. It uses the method of characteristics for simulations. Due to the lack of studies in this area, this research aims to contribute to the design of anticipation valves and a basis for further work.