Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Outros Autores: | , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFLA |
Texto Completo: | http://www.cerne.ufla.br/site/index.php/CERNE/article/view/616 http://repositorio.ufla.br/jspui/handle/1/14645 |
Resumo: | A study was carried out to ergonomically evaluate a feller-buncher, used in harvesting operations of Eucalyptus, in a forestry enterprise in the region of Brasilandia, state of Minas Gerais- Brazil. The following parameters were evaluate : access to the cabin, cabin, visibility, operator seat, controls and operation of the machine, noise level, vibration, climate control in the cabin, exhaustion of gases and dust, illumination and maintenance, according to the manual on “Ergonomic Guidelines for Forest Machines”, by Skogforsk. A qualitative evaluation was performed for all items, except for noise level, that was quantified by using a decibelimeter. According to the observations, each parameter was classified as A, B, C, D or 0 (zero), being. A that with the best working conditions, and 0, the least favorable. The results classified the items as follows: in class A, vibration; in class B, visibility, operator seat, controls and operation of the machine, noise level, climate control in the cabin, and exhaustion of gases and dust; in class C, cabin and illumination; in class D, access to the cabin. Therefore, none of the parameters was considered as class 0. The feller-buncher obtained an overall classification as B, indicating a highly productive work, slightly below the best level A, thus presenting a high level of active and passive working safety. It was also observed that some adjustment is required to adapt the working space of the machine to the Brazilian operator. It is apparent that his antropometric characteristics are less favorable than for the Europeans, for which the machine was designed. This results in much more effort required for operation by workers. |
id |
UFLA_1077315abeaf5f17e7a55c506f1df246 |
---|---|
oai_identifier_str |
oai:localhost:1/14645 |
network_acronym_str |
UFLA |
network_name_str |
Repositório Institucional da UFLA |
repository_id_str |
|
spelling |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucaliptoErgonomic evaluation of a feller-buncher used on eucalyptus timber-harvestingErgonomicsFeller-buncherEucalyptus - HarvestingErgonomiaEucalipto - ColheitaA study was carried out to ergonomically evaluate a feller-buncher, used in harvesting operations of Eucalyptus, in a forestry enterprise in the region of Brasilandia, state of Minas Gerais- Brazil. The following parameters were evaluate : access to the cabin, cabin, visibility, operator seat, controls and operation of the machine, noise level, vibration, climate control in the cabin, exhaustion of gases and dust, illumination and maintenance, according to the manual on “Ergonomic Guidelines for Forest Machines”, by Skogforsk. A qualitative evaluation was performed for all items, except for noise level, that was quantified by using a decibelimeter. According to the observations, each parameter was classified as A, B, C, D or 0 (zero), being. A that with the best working conditions, and 0, the least favorable. The results classified the items as follows: in class A, vibration; in class B, visibility, operator seat, controls and operation of the machine, noise level, climate control in the cabin, and exhaustion of gases and dust; in class C, cabin and illumination; in class D, access to the cabin. Therefore, none of the parameters was considered as class 0. The feller-buncher obtained an overall classification as B, indicating a highly productive work, slightly below the best level A, thus presenting a high level of active and passive working safety. It was also observed that some adjustment is required to adapt the working space of the machine to the Brazilian operator. It is apparent that his antropometric characteristics are less favorable than for the Europeans, for which the machine was designed. This results in much more effort required for operation by workers.Este estudo foi desenvolvido para avaliar ergonomicamente o feller-buncher, da marca Timberjack, modelo 608, utilizado na colheita de eucalipto, em uma empresa florestal da região de Brasilândia de Minas, estado de Minas Gerais. A máquina foi avaliada quanto aos seguintes parâmetros: acesso à cabine, posto de trabalho, visibilidade, assento do operador, controles e operação da máquina, ruído, vibração, controle de clima na cabine, exaustão de gases e partículas, iluminação e manutenção, de acordo com o manual “Ergonomic Guidelines for Forest Machines”, de Skogforsk. De acordo com as observações, cada parâmetro foi enquadrado em classes A, B, C, D ou 0 (zero), sendo A a de melhores condições de trabalho e 0, as mais desfavoráveis. Os resultados mostraram os itens assim classificados: na classe A, vibração; na classe B, visibilidade, assento do operador, controles e operação da máquina, ruído, controle de clima na cabine e exaustão de gases e partículas; na classe C, cabine e iluminação; na classe D, acesso à cabine e manutenção. Portanto, nenhum parâmetro foi considerado como classe 0. Isso leva à conclusão de que o “fellerbuncher” obteve uma classificação geral como B, que significa um trabalho altamente produtivo, um pouco abaixo do melhor grau, apresentando ainda um alto grau de segurança ativa e passiva. Foi também verificado que há necessidade de algum ajuste das condições do espaço de trabalho ao operador brasileiro, em função de suas características antropométricas serem diferentes dos europeus, para os quais a máquina foi desenhada.CERNE2015-10-162017-08-01T20:15:28Z2017-08-01T20:15:28Z2017-08-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfapplication/pdfhttp://www.cerne.ufla.br/site/index.php/CERNE/article/view/616SILVA, C. B. da; SANT’ANNA, C. de M.; MINETTI, L. J. Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto. Cerne, Lavras, v. 9, n. 1, p. 109-118, 2003.http://repositorio.ufla.br/jspui/handle/1/14645CERNE; Vol 9 No 1 (2003); 119-127CERNE; Vol 9 No 1 (2003); 119-1272317-63420104-7760reponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLAporhttp://www.cerne.ufla.br/site/index.php/CERNE/article/view/616/523Copyright (c) 2015 CERNEAttribution 4.0 Internationalhttp://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessSilva, Carla Bento daSant’Anna, Cleverson de MelloMinetti, Luciano José2021-04-06T18:32:41Zoai:localhost:1/14645Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2021-04-06T18:32:41Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false |
dc.title.none.fl_str_mv |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto Ergonomic evaluation of a feller-buncher used on eucalyptus timber-harvesting |
title |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto |
spellingShingle |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto Silva, Carla Bento da Ergonomics Feller-buncher Eucalyptus - Harvesting Ergonomia Eucalipto - Colheita |
title_short |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto |
title_full |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto |
title_fullStr |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto |
title_full_unstemmed |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto |
title_sort |
Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto |
author |
Silva, Carla Bento da |
author_facet |
Silva, Carla Bento da Sant’Anna, Cleverson de Mello Minetti, Luciano José |
author_role |
author |
author2 |
Sant’Anna, Cleverson de Mello Minetti, Luciano José |
author2_role |
author author |
dc.contributor.author.fl_str_mv |
Silva, Carla Bento da Sant’Anna, Cleverson de Mello Minetti, Luciano José |
dc.subject.por.fl_str_mv |
Ergonomics Feller-buncher Eucalyptus - Harvesting Ergonomia Eucalipto - Colheita |
topic |
Ergonomics Feller-buncher Eucalyptus - Harvesting Ergonomia Eucalipto - Colheita |
description |
A study was carried out to ergonomically evaluate a feller-buncher, used in harvesting operations of Eucalyptus, in a forestry enterprise in the region of Brasilandia, state of Minas Gerais- Brazil. The following parameters were evaluate : access to the cabin, cabin, visibility, operator seat, controls and operation of the machine, noise level, vibration, climate control in the cabin, exhaustion of gases and dust, illumination and maintenance, according to the manual on “Ergonomic Guidelines for Forest Machines”, by Skogforsk. A qualitative evaluation was performed for all items, except for noise level, that was quantified by using a decibelimeter. According to the observations, each parameter was classified as A, B, C, D or 0 (zero), being. A that with the best working conditions, and 0, the least favorable. The results classified the items as follows: in class A, vibration; in class B, visibility, operator seat, controls and operation of the machine, noise level, climate control in the cabin, and exhaustion of gases and dust; in class C, cabin and illumination; in class D, access to the cabin. Therefore, none of the parameters was considered as class 0. The feller-buncher obtained an overall classification as B, indicating a highly productive work, slightly below the best level A, thus presenting a high level of active and passive working safety. It was also observed that some adjustment is required to adapt the working space of the machine to the Brazilian operator. It is apparent that his antropometric characteristics are less favorable than for the Europeans, for which the machine was designed. This results in much more effort required for operation by workers. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-10-16 2017-08-01T20:15:28Z 2017-08-01T20:15:28Z 2017-08-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://www.cerne.ufla.br/site/index.php/CERNE/article/view/616 SILVA, C. B. da; SANT’ANNA, C. de M.; MINETTI, L. J. Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto. Cerne, Lavras, v. 9, n. 1, p. 109-118, 2003. http://repositorio.ufla.br/jspui/handle/1/14645 |
url |
http://www.cerne.ufla.br/site/index.php/CERNE/article/view/616 http://repositorio.ufla.br/jspui/handle/1/14645 |
identifier_str_mv |
SILVA, C. B. da; SANT’ANNA, C. de M.; MINETTI, L. J. Avaliação ergonômica do “Feller-Buncher” utilizado na colheita de eucalipto. Cerne, Lavras, v. 9, n. 1, p. 109-118, 2003. |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
http://www.cerne.ufla.br/site/index.php/CERNE/article/view/616/523 |
dc.rights.driver.fl_str_mv |
Copyright (c) 2015 CERNE Attribution 4.0 International http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Copyright (c) 2015 CERNE Attribution 4.0 International http://creativecommons.org/licenses/by/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
CERNE |
publisher.none.fl_str_mv |
CERNE |
dc.source.none.fl_str_mv |
CERNE; Vol 9 No 1 (2003); 119-127 CERNE; Vol 9 No 1 (2003); 119-127 2317-6342 0104-7760 reponame:Repositório Institucional da UFLA instname:Universidade Federal de Lavras (UFLA) instacron:UFLA |
instname_str |
Universidade Federal de Lavras (UFLA) |
instacron_str |
UFLA |
institution |
UFLA |
reponame_str |
Repositório Institucional da UFLA |
collection |
Repositório Institucional da UFLA |
repository.name.fl_str_mv |
Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA) |
repository.mail.fl_str_mv |
nivaldo@ufla.br || repositorio.biblioteca@ufla.br |
_version_ |
1807835227954872320 |