Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Outros Autores: | , , , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFLA |
Texto Completo: | http://repositorio.ufla.br/jspui/handle/1/43283 |
Resumo: | Despite its social, cultural and economic importance for the Amazon region, the energy potential of Mauritia flexuosa, popularly known as buriti, has not yet been explored in order to expand the possible uses of this species by the local communities. Therefore, the aim of this work was to compare the tissues that comprise the petiole of Mauritia flexuosa for combustion and carbonization. The petiole core and bark were separated and characterized by chemical composition (total and water-soluble extractives, lignin, and ashes), moisture content (based humid mass), proximate composition (contents of volatile matter, fixed carbon, and ash), basic density, higher heating value, and thermogravimetric analysis in N2 inert atmosphere. The two tissues from the Mauritia flexuosa petiole presented advantages for bioenergetic purposes, such as low ash content (≤ 2%) and higher heating value (≈ 18 MJ kg-1), in addition to suitable fixed carbon (≈ 18%). For the core and husk, the lignin contents (19 and 28%, respectively), extractives contents (9 and 5%, respectively), and basic density (0.041 and 0.267 g cm-3, respectively) significantly differed. However, the proximate composition of the tissues was not influenced by such differences, unlike the higher heating value and energy density. The thermogravimetric behavior showed higher degradation ratio and lower final mass yield (7%) for the core in comparison to the husk. The husk showed better quality for combustion and carbonization in comparison to the core. This is an advantageous result for the extractive activities of Amazonian communities because the husk is a waste from the petiole processing in order to obtain the core for handcraft. Due to the low basic density, the core can be noted for its use in torrefaction, densification, pyrolysis for the production of bio-oil and production of natural filters and activated charcoals, rather than direct combustion and carbonization. |
id |
UFLA_4a7724b5d1263993605e33f377354c02 |
---|---|
oai_identifier_str |
oai:localhost:1/43283 |
network_acronym_str |
UFLA |
network_name_str |
Repositório Institucional da UFLA |
repository_id_str |
|
spelling |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonizaçãoComparison of the quality of buriti (Mauritia flexuosa L. f.) petiole tissues for combustion and carbonizationPoder caloríficoDensidade energéticaDegradação térmicaMauritia flexuosaHeating valueEnergy densityThermal degradationDespite its social, cultural and economic importance for the Amazon region, the energy potential of Mauritia flexuosa, popularly known as buriti, has not yet been explored in order to expand the possible uses of this species by the local communities. Therefore, the aim of this work was to compare the tissues that comprise the petiole of Mauritia flexuosa for combustion and carbonization. The petiole core and bark were separated and characterized by chemical composition (total and water-soluble extractives, lignin, and ashes), moisture content (based humid mass), proximate composition (contents of volatile matter, fixed carbon, and ash), basic density, higher heating value, and thermogravimetric analysis in N2 inert atmosphere. The two tissues from the Mauritia flexuosa petiole presented advantages for bioenergetic purposes, such as low ash content (≤ 2%) and higher heating value (≈ 18 MJ kg-1), in addition to suitable fixed carbon (≈ 18%). For the core and husk, the lignin contents (19 and 28%, respectively), extractives contents (9 and 5%, respectively), and basic density (0.041 and 0.267 g cm-3, respectively) significantly differed. However, the proximate composition of the tissues was not influenced by such differences, unlike the higher heating value and energy density. The thermogravimetric behavior showed higher degradation ratio and lower final mass yield (7%) for the core in comparison to the husk. The husk showed better quality for combustion and carbonization in comparison to the core. This is an advantageous result for the extractive activities of Amazonian communities because the husk is a waste from the petiole processing in order to obtain the core for handcraft. Due to the low basic density, the core can be noted for its use in torrefaction, densification, pyrolysis for the production of bio-oil and production of natural filters and activated charcoals, rather than direct combustion and carbonization.Apesar da importância social, cultural e econômica para a Região Amazônica, o potencial energético da Mauritia flexuosa, popularmente conhecida como buriti, ainda não foi explorado para ampliar as possibilidades de uso dessa espécie pelas comunidades locais. Assim, o objetivo deste trabalho é comparar o potencial dos tecidos que compõem o pecíolo de Mauritia flexuosa para combustão e carbonização. O miolo e casca do pecíolo foram separados e caracterizados por composição química (extrativos removíveis por água e totais, lignina e cinzas), umidade base úmida, composição imediata (teores de materiais voláteis, carbono fixo e cinzas), densidade básica, poder calorífico superior e análise termogravimétrica em atmosfera inerte de N2. Os dois tecidos do pecíolo de Mauritia flexuosa apresentaram vantagens para finalidades bioenergéticas, como: baixo teor de cinzas (≤ 2%), além de teor de carbono fixo (≈ 18%) e poder calorífico superior (≈ 18 MJ kg-1) adequados. Para miolo e casca, os teores de lignina (19 e 28%, respectivamente), extrativos (8,9 e 5%, respectivamente), e densidade básica (0,041 e 0,267 g cm-3, respectivamente) diferiram significativamente. Contudo, a composição imediata dos tecidos não foi influenciada por essas diferenças, ao contrário do poder calorífico e densidade energética. O comportamento termogravimétrico demonstrou taxa de degradação superior e rendimento final em massa inferior (7%) para o miolo em relação à casca. A casca apresentou melhor qualidade para combustão e carbonização em comparação ao miolo. Esse resultado é vantajoso para as comunidades extrativistas da Amazônia, pois a casca é um resíduo do processamento do pecíolo para obtenção do miolo, destinado à produção de artesanatos. Pela baixa densidade básica, o miolo é mais indicado para torrefação, densificação, pirólise para geração de bio-óleo e produção de filtros naturais e carvões ativados do que para combustão direta e carbonização.Universidade Federal de Santa Maria2020-10-02T12:11:41Z2020-10-02T12:11:41Z2020-04info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfSOUZA, L. M. de et al. Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização. Ciência Florestal, Santa Maria, v. 30, n. 2, p. 516-531, abr./jun. 2020.http://repositorio.ufla.br/jspui/handle/1/43283Ciência Florestalreponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLAAttribution-NonCommercial 4.0 Internationalhttp://creativecommons.org/licenses/by-nc/4.0/info:eu-repo/semantics/openAccessSouza, Lyssa Martins deBezerra, Jefferson BezerraQueiroz, Wiully Luan Valverde deTrugilho, Paulo FernandoProtásio, Thiago de PaulaSouza, Tiago Marcolino deBufalino, Linapor2020-10-02T12:11:41Zoai:localhost:1/43283Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2020-10-02T12:11:41Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false |
dc.title.none.fl_str_mv |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização Comparison of the quality of buriti (Mauritia flexuosa L. f.) petiole tissues for combustion and carbonization |
title |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização |
spellingShingle |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização Souza, Lyssa Martins de Poder calorífico Densidade energética Degradação térmica Mauritia flexuosa Heating value Energy density Thermal degradation |
title_short |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização |
title_full |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização |
title_fullStr |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização |
title_full_unstemmed |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização |
title_sort |
Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização |
author |
Souza, Lyssa Martins de |
author_facet |
Souza, Lyssa Martins de Bezerra, Jefferson Bezerra Queiroz, Wiully Luan Valverde de Trugilho, Paulo Fernando Protásio, Thiago de Paula Souza, Tiago Marcolino de Bufalino, Lina |
author_role |
author |
author2 |
Bezerra, Jefferson Bezerra Queiroz, Wiully Luan Valverde de Trugilho, Paulo Fernando Protásio, Thiago de Paula Souza, Tiago Marcolino de Bufalino, Lina |
author2_role |
author author author author author author |
dc.contributor.author.fl_str_mv |
Souza, Lyssa Martins de Bezerra, Jefferson Bezerra Queiroz, Wiully Luan Valverde de Trugilho, Paulo Fernando Protásio, Thiago de Paula Souza, Tiago Marcolino de Bufalino, Lina |
dc.subject.por.fl_str_mv |
Poder calorífico Densidade energética Degradação térmica Mauritia flexuosa Heating value Energy density Thermal degradation |
topic |
Poder calorífico Densidade energética Degradação térmica Mauritia flexuosa Heating value Energy density Thermal degradation |
description |
Despite its social, cultural and economic importance for the Amazon region, the energy potential of Mauritia flexuosa, popularly known as buriti, has not yet been explored in order to expand the possible uses of this species by the local communities. Therefore, the aim of this work was to compare the tissues that comprise the petiole of Mauritia flexuosa for combustion and carbonization. The petiole core and bark were separated and characterized by chemical composition (total and water-soluble extractives, lignin, and ashes), moisture content (based humid mass), proximate composition (contents of volatile matter, fixed carbon, and ash), basic density, higher heating value, and thermogravimetric analysis in N2 inert atmosphere. The two tissues from the Mauritia flexuosa petiole presented advantages for bioenergetic purposes, such as low ash content (≤ 2%) and higher heating value (≈ 18 MJ kg-1), in addition to suitable fixed carbon (≈ 18%). For the core and husk, the lignin contents (19 and 28%, respectively), extractives contents (9 and 5%, respectively), and basic density (0.041 and 0.267 g cm-3, respectively) significantly differed. However, the proximate composition of the tissues was not influenced by such differences, unlike the higher heating value and energy density. The thermogravimetric behavior showed higher degradation ratio and lower final mass yield (7%) for the core in comparison to the husk. The husk showed better quality for combustion and carbonization in comparison to the core. This is an advantageous result for the extractive activities of Amazonian communities because the husk is a waste from the petiole processing in order to obtain the core for handcraft. Due to the low basic density, the core can be noted for its use in torrefaction, densification, pyrolysis for the production of bio-oil and production of natural filters and activated charcoals, rather than direct combustion and carbonization. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-10-02T12:11:41Z 2020-10-02T12:11:41Z 2020-04 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SOUZA, L. M. de et al. Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização. Ciência Florestal, Santa Maria, v. 30, n. 2, p. 516-531, abr./jun. 2020. http://repositorio.ufla.br/jspui/handle/1/43283 |
identifier_str_mv |
SOUZA, L. M. de et al. Comparação da qualidade dos tecidos do pecíolo de buriti (Mauritia flexuosa L. f.) para combustão e carbonização. Ciência Florestal, Santa Maria, v. 30, n. 2, p. 516-531, abr./jun. 2020. |
url |
http://repositorio.ufla.br/jspui/handle/1/43283 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial 4.0 International http://creativecommons.org/licenses/by-nc/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial 4.0 International http://creativecommons.org/licenses/by-nc/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
Ciência Florestal reponame:Repositório Institucional da UFLA instname:Universidade Federal de Lavras (UFLA) instacron:UFLA |
instname_str |
Universidade Federal de Lavras (UFLA) |
instacron_str |
UFLA |
institution |
UFLA |
reponame_str |
Repositório Institucional da UFLA |
collection |
Repositório Institucional da UFLA |
repository.name.fl_str_mv |
Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA) |
repository.mail.fl_str_mv |
nivaldo@ufla.br || repositorio.biblioteca@ufla.br |
_version_ |
1807835191971938304 |