Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFRN |
Texto Completo: | https://repositorio.ufrn.br/jspui/handle/123456789/15318 |
Resumo: | The Methods for compensation of harmonic currents and voltages have been widely used since these methods allow to reduce to acceptable levels the harmonic distortion in the voltages or currents in a power system, and also compensate reactive. The reduction of harmonics and reactive contributes to the reduction of losses in transmission lines and electrical machinery, increasing the power factor, reduce the occurrence of overvoltage and overcurrent. The active power filter is the most efficient method for compensation of harmonic currents and voltages. The active power filter is necessary to use current and voltage controllers loop. Conventionally, the current and voltage control loop of active filter has been done by proportional controllers integrative. This work, investigated the use of a robust adaptive control technique on the shunt active power filter current and voltage control loop to increase robustness and improve the performance of active filter to compensate for harmonics. The proposed control scheme is based on a combination of techniques for adaptive control pole placement and variable structure. The advantages of the proposed method over conventional ones are: lower total harmonic distortion, more flexibility, adaptability and robustness to the system. Moreover, the proposed control scheme improves the performance and improves the transient of active filter. The validation of the proposed technique was verified initially by a simulation program implemented in C++ language and then experimental results were obtained using a prototype three-phase active filter of 1 kVA |
id |
UFRN_d154bad9038d9126744ee4636e230b86 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/15318 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Braz, érico Cadinelihttp://lattes.cnpq.br/9382571991103772http://lattes.cnpq.br/6628177274865696Freitas, Isaac Soares dehttp://lattes.cnpq.br/7545625055421975Martins, Allan de Medeiroshttp://lattes.cnpq.br/4402694969508077Salazar, Andrés Ortizhttp://lattes.cnpq.br/7865065553087432Ribeiro, Ricardo Lúcio de Araújo2014-12-17T14:55:43Z2010-10-082014-12-17T14:55:43Z2010-03-26BRAZ, érico Cadineli. Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo. 2010. 106 f. Dissertação (Mestrado em Automação e Sistemas; Engenharia de Computação; Telecomunicações) - Universidade Federal do Rio Grande do Norte, Natal, 2010.https://repositorio.ufrn.br/jspui/handle/123456789/15318The Methods for compensation of harmonic currents and voltages have been widely used since these methods allow to reduce to acceptable levels the harmonic distortion in the voltages or currents in a power system, and also compensate reactive. The reduction of harmonics and reactive contributes to the reduction of losses in transmission lines and electrical machinery, increasing the power factor, reduce the occurrence of overvoltage and overcurrent. The active power filter is the most efficient method for compensation of harmonic currents and voltages. The active power filter is necessary to use current and voltage controllers loop. Conventionally, the current and voltage control loop of active filter has been done by proportional controllers integrative. This work, investigated the use of a robust adaptive control technique on the shunt active power filter current and voltage control loop to increase robustness and improve the performance of active filter to compensate for harmonics. The proposed control scheme is based on a combination of techniques for adaptive control pole placement and variable structure. The advantages of the proposed method over conventional ones are: lower total harmonic distortion, more flexibility, adaptability and robustness to the system. Moreover, the proposed control scheme improves the performance and improves the transient of active filter. The validation of the proposed technique was verified initially by a simulation program implemented in C++ language and then experimental results were obtained using a prototype three-phase active filter of 1 kVAOs métodos para compensação de correntes e tensões harmônicas vêm sendo bastante utilizados, visto que esses métodos permitem reduzir a níveis aceitáveis as distorções harmônicas nas tensões ou correntes em um sistema elétrico de potência, e ainda, compensar reativos. A redução de harmônicas e reativos contribuem para: a diminuição das perdas nas linhas de transmissão e nas máquinas elétricas, o aumento do fator de potência e a redução de ocorrências de sobretensões e sobrecorrentes. O filtro ativo de potência é o método mais eficiente para compensação de correntes e tensões harmônicas. No filtro ativo de potência é necessária a utilização de controladores para as malhas de corrente e tensão. Convencionalmente, o controle dessas malhas tem sido feito por controladores proporcionais integrativos. Neste trabalho, é investigado o uso de uma técnica de controle adaptativo robusto nas malha de corrente e tensão, do filtro ativo de potência em paralelo trifásico, para aumentar a robustez e melhorar o desempenho desse filtro ativo na compensação de harmônicos. A técnica de controle proposta é baseada na combinação das técnicas de controle adaptativo por posicionamento de pólos e de estrutura variável. As vantagens do método proposto sobre os convencionais são: menor taxa de distorção harmônica, maior flexibilidade, capacidade de adaptação e robustez para o sistema. Além disso, a técnica de controle proposta aumenta o desempenho e melhora o transitório do filtro ativo. A validação da técnica proposta foi verificada inicialmente através de um programa de simulação implementado em linguagem C ++ e em seguida foram obtidos resultados experimentais usando um protótipo de um filtro ativo trifásico de 1 kVAapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia ElétricaUFRNBRAutomação e Sistemas; Engenharia de Computação; TelecomunicaçõesFiltro Ativo de PotênciaControle AdaptativoRobustezSistema com Estrutura Variável e Posicionamento de PóloActive Power FilterAdaptive ControlRobustnessVariable Structure Systems and Pole PlacementCNPQ::ENGENHARIAS::ENGENHARIA ELETRICATécnica de controle adaptativo robusto aplicada a filtros ativos de potência e paraleloinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALEricoCB_DISSERT.pdfapplication/pdf1960043https://repositorio.ufrn.br/bitstream/123456789/15318/1/EricoCB_DISSERT.pdf7c0ebefa8d09683721a890c3c7d00bbbMD51TEXTEricoCB_DISSERT.pdf.txtEricoCB_DISSERT.pdf.txtExtracted texttext/plain146382https://repositorio.ufrn.br/bitstream/123456789/15318/6/EricoCB_DISSERT.pdf.txt4e3b71764cabc29925ed0ffc93e24a7aMD56THUMBNAILEricoCB_DISSERT.pdf.jpgEricoCB_DISSERT.pdf.jpgIM Thumbnailimage/jpeg3554https://repositorio.ufrn.br/bitstream/123456789/15318/7/EricoCB_DISSERT.pdf.jpg47a7518de788a38ec090f9022898a426MD57123456789/153182017-11-02 08:40:15.762oai:https://repositorio.ufrn.br:123456789/15318Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-02T11:40:15Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
title |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
spellingShingle |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo Braz, érico Cadineli Filtro Ativo de Potência Controle Adaptativo Robustez Sistema com Estrutura Variável e Posicionamento de Pólo Active Power Filter Adaptive Control Robustness Variable Structure Systems and Pole Placement CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
title_full |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
title_fullStr |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
title_full_unstemmed |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
title_sort |
Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo |
author |
Braz, érico Cadineli |
author_facet |
Braz, érico Cadineli |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/9382571991103772 |
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/6628177274865696 |
dc.contributor.referees1.pt_BR.fl_str_mv |
Freitas, Isaac Soares de |
dc.contributor.referees1ID.por.fl_str_mv |
|
dc.contributor.referees1Lattes.por.fl_str_mv |
http://lattes.cnpq.br/7545625055421975 |
dc.contributor.referees2.pt_BR.fl_str_mv |
Martins, Allan de Medeiros |
dc.contributor.referees2ID.por.fl_str_mv |
|
dc.contributor.referees2Lattes.por.fl_str_mv |
http://lattes.cnpq.br/4402694969508077 |
dc.contributor.referees3.pt_BR.fl_str_mv |
Salazar, Andrés Ortiz |
dc.contributor.referees3ID.por.fl_str_mv |
|
dc.contributor.referees3Lattes.por.fl_str_mv |
http://lattes.cnpq.br/7865065553087432 |
dc.contributor.author.fl_str_mv |
Braz, érico Cadineli |
dc.contributor.advisor1.fl_str_mv |
Ribeiro, Ricardo Lúcio de Araújo |
contributor_str_mv |
Ribeiro, Ricardo Lúcio de Araújo |
dc.subject.por.fl_str_mv |
Filtro Ativo de Potência Controle Adaptativo Robustez Sistema com Estrutura Variável e Posicionamento de Pólo |
topic |
Filtro Ativo de Potência Controle Adaptativo Robustez Sistema com Estrutura Variável e Posicionamento de Pólo Active Power Filter Adaptive Control Robustness Variable Structure Systems and Pole Placement CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
dc.subject.eng.fl_str_mv |
Active Power Filter Adaptive Control Robustness Variable Structure Systems and Pole Placement |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
The Methods for compensation of harmonic currents and voltages have been widely used since these methods allow to reduce to acceptable levels the harmonic distortion in the voltages or currents in a power system, and also compensate reactive. The reduction of harmonics and reactive contributes to the reduction of losses in transmission lines and electrical machinery, increasing the power factor, reduce the occurrence of overvoltage and overcurrent. The active power filter is the most efficient method for compensation of harmonic currents and voltages. The active power filter is necessary to use current and voltage controllers loop. Conventionally, the current and voltage control loop of active filter has been done by proportional controllers integrative. This work, investigated the use of a robust adaptive control technique on the shunt active power filter current and voltage control loop to increase robustness and improve the performance of active filter to compensate for harmonics. The proposed control scheme is based on a combination of techniques for adaptive control pole placement and variable structure. The advantages of the proposed method over conventional ones are: lower total harmonic distortion, more flexibility, adaptability and robustness to the system. Moreover, the proposed control scheme improves the performance and improves the transient of active filter. The validation of the proposed technique was verified initially by a simulation program implemented in C++ language and then experimental results were obtained using a prototype three-phase active filter of 1 kVA |
publishDate |
2010 |
dc.date.available.fl_str_mv |
2010-10-08 2014-12-17T14:55:43Z |
dc.date.issued.fl_str_mv |
2010-03-26 |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:55:43Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
BRAZ, érico Cadineli. Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo. 2010. 106 f. Dissertação (Mestrado em Automação e Sistemas; Engenharia de Computação; Telecomunicações) - Universidade Federal do Rio Grande do Norte, Natal, 2010. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/15318 |
identifier_str_mv |
BRAZ, érico Cadineli. Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo. 2010. 106 f. Dissertação (Mestrado em Automação e Sistemas; Engenharia de Computação; Telecomunicações) - Universidade Federal do Rio Grande do Norte, Natal, 2010. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/15318 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Elétrica |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Automação e Sistemas; Engenharia de Computação; Telecomunicações |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/15318/1/EricoCB_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/15318/6/EricoCB_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/15318/7/EricoCB_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
7c0ebefa8d09683721a890c3c7d00bbb 4e3b71764cabc29925ed0ffc93e24a7a 47a7518de788a38ec090f9022898a426 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1802117712226287616 |