Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/15087 https://doi.org/10.14393/ufu.te.2015.45 |
Resumo: | In this thesis are presented experimental measurements of pressure drop and profiles of velocity and pressure gradient simulated via CFD of non-Newtonian fluids in annular ducts concentric/eccentric, with/without rotation of the inner tube, for cases with/without partial obstruction of the annular region. Annular fluid flow is a relevant subject for many industrial applications, especially for the oil and gas industry. It is very important to know the fluid dynamics of the drilling fluid, to assure a proper cleaning of the well and to reduce the effective costs of the operation.In directional drilling often the annulus is eccentric as a result of the column weight, and due to drill bit fluctuations, the eccentricity may vary along the length of the well. Furthermore, by the gravity effect there will be a strong tendency for the solids to accumulate in the bottom of the well, forming a bed of settled cuttings that partially obstructs the flow, which can hinders and even interrupt the drilling operation. For this reason it is important to study the effect of the overlap of these two factors (eccentricity and obstruction) in the flow, which has not been addressed in the literature. Thus, a partnership formed between PETROBRAS and FEQUI/UFU research group allowed the development of this work. A experimental design was used to the acquisition of data regarding hydrodynamic losses in horizontal sections with partial obstruction of 6 mm considering the eccentricity (0, 0.23 and 0.46), flow rate (3, 6 and 9 m3/h), Xanthan Gum concentration (0.1, 0.3 and 0.5%) and rotation of the inner cylinder (0, 200 and 400 rpm). Numerical simulations conducted by using the software FLUENT® 14.0 for periodic sections with different eccentricities (0, 0.23 and 0.46) and obstruction heights (0, 6 and 12 mm) allowed evaluating the influence of operating variables (flow rate of 3 and 9 m3/h and rotations of 0 and 400 rpm) and rheology of the fluid (0.1 and 0.5%) on the flow (axial and tangential velocities profiles and pressure drop data). The injection of particles allowed visualization and dimensioning of the helical path of the same in the annular, which were compared with streamlines simulated by FLUENT®. Comparisons between numerical calculations and literature data indicated, in general, a very good agreement. The results reported on helical flow in annular partially obstructed are a novelty in literature and allow a better understanding of the complex phenomena that may occur in drilling of horizontal and inclined wells. |
id |
UFU_18429af682e9c807a879ad541bc9fcf2 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/15087 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da colunaPerfuraçãoAnularExcentricidadeObstrução parcialPlanejamento de experimentosCFDPoços de petróleo - Fluidos de perfuraçãoEscoamento turbulentoDrillingAnularEccentricityPartial obstructionExperimental designCNPQ::ENGENHARIAS::ENGENHARIA QUIMICAIn this thesis are presented experimental measurements of pressure drop and profiles of velocity and pressure gradient simulated via CFD of non-Newtonian fluids in annular ducts concentric/eccentric, with/without rotation of the inner tube, for cases with/without partial obstruction of the annular region. Annular fluid flow is a relevant subject for many industrial applications, especially for the oil and gas industry. It is very important to know the fluid dynamics of the drilling fluid, to assure a proper cleaning of the well and to reduce the effective costs of the operation.In directional drilling often the annulus is eccentric as a result of the column weight, and due to drill bit fluctuations, the eccentricity may vary along the length of the well. Furthermore, by the gravity effect there will be a strong tendency for the solids to accumulate in the bottom of the well, forming a bed of settled cuttings that partially obstructs the flow, which can hinders and even interrupt the drilling operation. For this reason it is important to study the effect of the overlap of these two factors (eccentricity and obstruction) in the flow, which has not been addressed in the literature. Thus, a partnership formed between PETROBRAS and FEQUI/UFU research group allowed the development of this work. A experimental design was used to the acquisition of data regarding hydrodynamic losses in horizontal sections with partial obstruction of 6 mm considering the eccentricity (0, 0.23 and 0.46), flow rate (3, 6 and 9 m3/h), Xanthan Gum concentration (0.1, 0.3 and 0.5%) and rotation of the inner cylinder (0, 200 and 400 rpm). Numerical simulations conducted by using the software FLUENT® 14.0 for periodic sections with different eccentricities (0, 0.23 and 0.46) and obstruction heights (0, 6 and 12 mm) allowed evaluating the influence of operating variables (flow rate of 3 and 9 m3/h and rotations of 0 and 400 rpm) and rheology of the fluid (0.1 and 0.5%) on the flow (axial and tangential velocities profiles and pressure drop data). The injection of particles allowed visualization and dimensioning of the helical path of the same in the annular, which were compared with streamlines simulated by FLUENT®. Comparisons between numerical calculations and literature data indicated, in general, a very good agreement. The results reported on helical flow in annular partially obstructed are a novelty in literature and allow a better understanding of the complex phenomena that may occur in drilling of horizontal and inclined wells.Doutor em Engenharia QuímicaNesta tese são apresentadas medidas experimentais de queda de pressão bem como perfis de velocidade e gradientes de pressão simulados via CFD de fluidos não-Newtonianos em dutos anulares concêntricos/excêntricos, com/sem rotação do tubo interno, para casos com/sem obstrução parcial da região anular. Escoamento em dutos anulares é um assunto relevante para diversas aplicações industriais, especialmente para a indústria petrolífera. É de grande interesse conhecer a fluidodinâmica do fluido de perfuração, como se dará a limpeza do poço e reduzir os custos envolvidos na operação. Na perfuração direcional geralmente o anular é excêntrico em função do peso da coluna, e devido às oscilações da broca, a excentricidade pode variar ao longo comprimento do poço. Além disso, existe pelo efeito da gravidade uma forte tendência de acúmulo de sólidos na parte inferior do poço, formando um leito de cascalhos sedimentado que obstrui parcialmente o escoamento, o que pode dificultar ou até mesmo impedir a operação de perfuração. Por esta razão é importante estudar o efeito da sobreposição desses dois fatores (excentricidade e obstrução) no escoamento, o que ainda não foi abordado na literatura. Assim, foi formada uma parceria entre a PETROBRAS e o grupo de pesquisa da FEQUI/UFU que viabilizou o desenvolvimento deste trabalho. Através de um planejamento experimental foi feita a aquisição de dados referentes às perdas hidrodinâmicas em seções horizontais com obstrução parcial de 6 mm em função da excentricidade (0, 0,23 e 0,46), vazão de escoamento (3, 6 e 9 m3/h), concentração de goma Xantana (0,1, 0,3 e 0,5%) e rotação do eixo interno (0, 200 e 400 rpm). Simulações numéricas usando o software FLUENT® 14.0 para seções periódicas com diferentes excentricidades (0, 0,23 e 0,46) e alturas de obstrução (0, 6 e 12 mm) permitiram avaliar a influência de variáveis operacionais (vazões de 3 e 9 m3/h e rotações de 0 e 400 rpm) e reologia do fluido (0,1 e 0,5%) sobre o escoamento (perfis de velocidades axial e tangencial e dados de queda de pressão). A injeção de partículas permitiu a visualização e dimensionamento da trajetória helicoidal das mesmas no anular, que foram comparadas com linhas de corrente simuladas via FLUENT®. Comparações entre os resultados numéricos e dados da literatura indicaram, em geral, uma concordância muito boa. Os resultados apresentados sobre escoamento helicoidal em anulares parcialmente obstruídos são uma novidade na literatura e permitem um melhor entendimento dos fenômenos complexos que podem ocorrer na perfuração de poços horizontais e inclinados.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em Engenharia QuímicaEngenhariasUFUDuarte, Claudio Robertohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708473P5Ataíde, Carlos Henriquehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787952H6Gedraite, Rubenshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708498A6Souza, Francisco José dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4703183Y4Pereira, Fábio de Assis Resselhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4768331U0Vieira Neto, José Luizhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702175Z3Bicalho, Isabele Cristina2016-06-22T18:41:27Z2015-11-272016-06-22T18:41:27Z2015-03-23info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfBICALHO, Isabele Cristina. Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna. 2015. 238 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2015. DOI https://doi.org/10.14393/ufu.te.2015.45https://repositorio.ufu.br/handle/123456789/15087https://doi.org/10.14393/ufu.te.2015.45porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-03-03T23:57:56Zoai:repositorio.ufu.br:123456789/15087Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-03-03T23:57:56Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
title |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
spellingShingle |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna Bicalho, Isabele Cristina Perfuração Anular Excentricidade Obstrução parcial Planejamento de experimentos CFD Poços de petróleo - Fluidos de perfuração Escoamento turbulento Drilling Anular Eccentricity Partial obstruction Experimental design CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
title_full |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
title_fullStr |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
title_full_unstemmed |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
title_sort |
Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna |
author |
Bicalho, Isabele Cristina |
author_facet |
Bicalho, Isabele Cristina |
author_role |
author |
dc.contributor.none.fl_str_mv |
Duarte, Claudio Roberto http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708473P5 Ataíde, Carlos Henrique http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787952H6 Gedraite, Rubens http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708498A6 Souza, Francisco José de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4703183Y4 Pereira, Fábio de Assis Ressel http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4768331U0 Vieira Neto, José Luiz http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702175Z3 |
dc.contributor.author.fl_str_mv |
Bicalho, Isabele Cristina |
dc.subject.por.fl_str_mv |
Perfuração Anular Excentricidade Obstrução parcial Planejamento de experimentos CFD Poços de petróleo - Fluidos de perfuração Escoamento turbulento Drilling Anular Eccentricity Partial obstruction Experimental design CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
topic |
Perfuração Anular Excentricidade Obstrução parcial Planejamento de experimentos CFD Poços de petróleo - Fluidos de perfuração Escoamento turbulento Drilling Anular Eccentricity Partial obstruction Experimental design CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
description |
In this thesis are presented experimental measurements of pressure drop and profiles of velocity and pressure gradient simulated via CFD of non-Newtonian fluids in annular ducts concentric/eccentric, with/without rotation of the inner tube, for cases with/without partial obstruction of the annular region. Annular fluid flow is a relevant subject for many industrial applications, especially for the oil and gas industry. It is very important to know the fluid dynamics of the drilling fluid, to assure a proper cleaning of the well and to reduce the effective costs of the operation.In directional drilling often the annulus is eccentric as a result of the column weight, and due to drill bit fluctuations, the eccentricity may vary along the length of the well. Furthermore, by the gravity effect there will be a strong tendency for the solids to accumulate in the bottom of the well, forming a bed of settled cuttings that partially obstructs the flow, which can hinders and even interrupt the drilling operation. For this reason it is important to study the effect of the overlap of these two factors (eccentricity and obstruction) in the flow, which has not been addressed in the literature. Thus, a partnership formed between PETROBRAS and FEQUI/UFU research group allowed the development of this work. A experimental design was used to the acquisition of data regarding hydrodynamic losses in horizontal sections with partial obstruction of 6 mm considering the eccentricity (0, 0.23 and 0.46), flow rate (3, 6 and 9 m3/h), Xanthan Gum concentration (0.1, 0.3 and 0.5%) and rotation of the inner cylinder (0, 200 and 400 rpm). Numerical simulations conducted by using the software FLUENT® 14.0 for periodic sections with different eccentricities (0, 0.23 and 0.46) and obstruction heights (0, 6 and 12 mm) allowed evaluating the influence of operating variables (flow rate of 3 and 9 m3/h and rotations of 0 and 400 rpm) and rheology of the fluid (0.1 and 0.5%) on the flow (axial and tangential velocities profiles and pressure drop data). The injection of particles allowed visualization and dimensioning of the helical path of the same in the annular, which were compared with streamlines simulated by FLUENT®. Comparisons between numerical calculations and literature data indicated, in general, a very good agreement. The results reported on helical flow in annular partially obstructed are a novelty in literature and allow a better understanding of the complex phenomena that may occur in drilling of horizontal and inclined wells. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-11-27 2015-03-23 2016-06-22T18:41:27Z 2016-06-22T18:41:27Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
BICALHO, Isabele Cristina. Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna. 2015. 238 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2015. DOI https://doi.org/10.14393/ufu.te.2015.45 https://repositorio.ufu.br/handle/123456789/15087 https://doi.org/10.14393/ufu.te.2015.45 |
identifier_str_mv |
BICALHO, Isabele Cristina. Estudo experimental e de simulação por CFD de escoamentos em seções anulares com excentricidade variável e obstrução parcial da coluna. 2015. 238 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2015. DOI https://doi.org/10.14393/ufu.te.2015.45 |
url |
https://repositorio.ufu.br/handle/123456789/15087 https://doi.org/10.14393/ufu.te.2015.45 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Química Engenharias UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Química Engenharias UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569672476622848 |