Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2006 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/16992 |
Resumo: | The delay in pouring of elastomers impressions can be the cause of possible dimensional alterations of the working casts, mainly when they are under influence of other factors that interfere on its dimensional stability. The purpose of this research was to test the hypothesis that the delay in pouring of the casts after the attainment of impressions of polysulfide and polyether has influence in dimensions of the model obtained, using a method that simulates the conditions of the practical clinic. It had been used a polysulfide (Permlastic - Kerr) and a polyether (Impregum 3M ESPE) to mold a master model with two pillars: 1 first human premolar and 1 first human molar prepared for fixed partial denture with three elements. Six reference points had been established in each tooth, resulting in seven measurements: (mesiodistal, buccopalatine and cervico-occlusal for both, and the interpillars distance). Molds were obtained with acrylic resin custom-trays, stored for the times of 30min, 2h and 12h (n = 10) and poured with dental stone type IV (Vel-Mix - Kerr). Three examiners measured the master model and the samples in an optical microscope (Mitutoyo). The measurements of each sample had been compared with the master model by means of Student s t test, and between groups by means of two-way ANOVA, and Tukey s test (P<.05). The average distances for polysulfide varied from 0 to 23μm for the time of 30min, 4 to 30μm for 2h and 1 to 22μm for 12h of storage. For the polyether, it was from 1 to 43μm for 30min, 2 to 44μm for 2h, and 0 to 23μm for 12h. The polysulfide and the polyether generated models with alterations in at least one of the distances, but only one of them was influenced by the storage time. Almost all the alterations were clinically acceptable. |
id |
UFU_37cf572f00c41e2268b6fbd33ebde81a |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/16992 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modeloElastômerosEstabilidade dimensionalMateriais dentáriosDental materialsDimensional stabilityElastomersCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAThe delay in pouring of elastomers impressions can be the cause of possible dimensional alterations of the working casts, mainly when they are under influence of other factors that interfere on its dimensional stability. The purpose of this research was to test the hypothesis that the delay in pouring of the casts after the attainment of impressions of polysulfide and polyether has influence in dimensions of the model obtained, using a method that simulates the conditions of the practical clinic. It had been used a polysulfide (Permlastic - Kerr) and a polyether (Impregum 3M ESPE) to mold a master model with two pillars: 1 first human premolar and 1 first human molar prepared for fixed partial denture with three elements. Six reference points had been established in each tooth, resulting in seven measurements: (mesiodistal, buccopalatine and cervico-occlusal for both, and the interpillars distance). Molds were obtained with acrylic resin custom-trays, stored for the times of 30min, 2h and 12h (n = 10) and poured with dental stone type IV (Vel-Mix - Kerr). Three examiners measured the master model and the samples in an optical microscope (Mitutoyo). The measurements of each sample had been compared with the master model by means of Student s t test, and between groups by means of two-way ANOVA, and Tukey s test (P<.05). The average distances for polysulfide varied from 0 to 23μm for the time of 30min, 4 to 30μm for 2h and 1 to 22μm for 12h of storage. For the polyether, it was from 1 to 43μm for 30min, 2 to 44μm for 2h, and 0 to 23μm for 12h. The polysulfide and the polyether generated models with alterations in at least one of the distances, but only one of them was influenced by the storage time. Almost all the alterations were clinically acceptable.Mestre em OdontologiaA demora no vazamento dos moldes de elastômeros pode ser causa de possíveis alterações dimensionais dos modelos de trabalho, principalmente quando estão sob influência de outros fatores que interferem em sua estabilidade dimensional. Este trabalho se propôs a testar a hipótese de que o tempo decorrido entre a obtenção de moldes de polissulfeto e poliéter e o vazamento do gesso tem influência nas dimensões do modelo obtido, por meio de um método que simula as condições encontradas na prática clínica. Foram empregados um polissulfeto (Permlastic - Kerr) e um poliéter (Impregum 3M ESPE) para moldar um modelo contendo dois pilares: 1 molar e 1 pré-molar humanos preparados para prótese fixa metalo-cerâmica de três elementos. Foram estabelecidos seis pontos de referência em cada dente, resultando em sete mensurações: (mésio-distal, vestíbulo-palatina e cérvico-oclusal para ambos, e a distância interpilares). Moldes foram obtidos com casquetes de resina acrílica, armazenados pelos tempos de 30min, 2h e 12h (n= 10) e vazados com gesso tipo IV (Vel-Mix - Kerr). Três examinadores mensuraram o modelo mestre e as amostras em microscópio comparador (Mitutoyo). As distâncias, em μm, foram comparadas por meio do teste t-Student aos dados do modelo mestre, e entre grupos pela Análise de variância fatorial 2x3 e teste de Tukey (p<0,05). Os valores médios de alteração das distâncias para o polissulfeto variaram entre 0 e 23μm para o tempo de 30min, 4 e 30μm para 2h e 1 e 22μm para 12h de armazenagem. Para o poliéter, variaram entre 1 e 43μm para 30min, 2 e 44μm para 2h, e 0 e 23μm para 12h. O polissulfeto e o poliéter geraram modelos com alterações em pelo menos uma das distâncias, mas apenas uma delas foi influenciada pelo tempo de armazenagem. A maioria das alterações foi clinicamente aceitável.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em OdontologiaCiências da SaúdeUFUSoares, Carlos Joséhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4790296P8Mota, Adérito Soares dahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4779499D6Fernandes Neto, Alfredo Júliohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780690T1Souza, Valéria Oliveira Pagnano dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767615Z5Dias, Danilo Rocha2016-06-22T18:47:35Z2007-01-292016-06-22T18:47:35Z2006-05-03info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfDIAS, Danilo Rocha. Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo. 2006. 96 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2006.https://repositorio.ufu.br/handle/123456789/16992porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-03-19T20:23:59Zoai:repositorio.ufu.br:123456789/16992Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-03-19T20:23:59Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
title |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
spellingShingle |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo Dias, Danilo Rocha Elastômeros Estabilidade dimensional Materiais dentários Dental materials Dimensional stability Elastomers CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
title_full |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
title_fullStr |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
title_full_unstemmed |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
title_sort |
Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo |
author |
Dias, Danilo Rocha |
author_facet |
Dias, Danilo Rocha |
author_role |
author |
dc.contributor.none.fl_str_mv |
Soares, Carlos José http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4790296P8 Mota, Adérito Soares da http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4779499D6 Fernandes Neto, Alfredo Júlio http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780690T1 Souza, Valéria Oliveira Pagnano de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767615Z5 |
dc.contributor.author.fl_str_mv |
Dias, Danilo Rocha |
dc.subject.por.fl_str_mv |
Elastômeros Estabilidade dimensional Materiais dentários Dental materials Dimensional stability Elastomers CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
topic |
Elastômeros Estabilidade dimensional Materiais dentários Dental materials Dimensional stability Elastomers CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
The delay in pouring of elastomers impressions can be the cause of possible dimensional alterations of the working casts, mainly when they are under influence of other factors that interfere on its dimensional stability. The purpose of this research was to test the hypothesis that the delay in pouring of the casts after the attainment of impressions of polysulfide and polyether has influence in dimensions of the model obtained, using a method that simulates the conditions of the practical clinic. It had been used a polysulfide (Permlastic - Kerr) and a polyether (Impregum 3M ESPE) to mold a master model with two pillars: 1 first human premolar and 1 first human molar prepared for fixed partial denture with three elements. Six reference points had been established in each tooth, resulting in seven measurements: (mesiodistal, buccopalatine and cervico-occlusal for both, and the interpillars distance). Molds were obtained with acrylic resin custom-trays, stored for the times of 30min, 2h and 12h (n = 10) and poured with dental stone type IV (Vel-Mix - Kerr). Three examiners measured the master model and the samples in an optical microscope (Mitutoyo). The measurements of each sample had been compared with the master model by means of Student s t test, and between groups by means of two-way ANOVA, and Tukey s test (P<.05). The average distances for polysulfide varied from 0 to 23μm for the time of 30min, 4 to 30μm for 2h and 1 to 22μm for 12h of storage. For the polyether, it was from 1 to 43μm for 30min, 2 to 44μm for 2h, and 0 to 23μm for 12h. The polysulfide and the polyether generated models with alterations in at least one of the distances, but only one of them was influenced by the storage time. Almost all the alterations were clinically acceptable. |
publishDate |
2006 |
dc.date.none.fl_str_mv |
2006-05-03 2007-01-29 2016-06-22T18:47:35Z 2016-06-22T18:47:35Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
DIAS, Danilo Rocha. Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo. 2006. 96 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2006. https://repositorio.ufu.br/handle/123456789/16992 |
identifier_str_mv |
DIAS, Danilo Rocha. Alteração dimensional de moldes de polissulfeto e poliéter sob influência do tempo de confecção do modelo. 2006. 96 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2006. |
url |
https://repositorio.ufu.br/handle/123456789/16992 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569615544188928 |