Avaliação da influência do calorímetro de água em soldagens TIG
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/20875 |
Resumo: | The objective of this work was to verify if the forced cooling provided by the calorimeter affects the geometry of the heat affected zone and the fusion zone. For this, welds were made on plates of two thicknesses using Tungsten Inert Gas process. One plate was held in the calorimeter and the other plate out. The choice of this process was due to the few studies carried out in this area, showing results about the heat flux in TIG welds performed without filler metal. It has been found that the calorimeter and the thickness plate have little influence on the heat affected region and no influence on the fusion region. In addition, it was observed that the intensity of the current was a determining factor in the penetration of the weld. |
id |
UFU_40d23800f15a723c50a297498af1e4a2 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/20875 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Avaliação da influência do calorímetro de água em soldagens TIGSoldagemCalorimeterCalorímetroWeldingCNPQ::ENGENHARIASThe objective of this work was to verify if the forced cooling provided by the calorimeter affects the geometry of the heat affected zone and the fusion zone. For this, welds were made on plates of two thicknesses using Tungsten Inert Gas process. One plate was held in the calorimeter and the other plate out. The choice of this process was due to the few studies carried out in this area, showing results about the heat flux in TIG welds performed without filler metal. It has been found that the calorimeter and the thickness plate have little influence on the heat affected region and no influence on the fusion region. In addition, it was observed that the intensity of the current was a determining factor in the penetration of the weld.Trabalho de Conclusão de Curso (Graduação)O objetivo deste trabalho foi verificar se o resfriamento forçado, proporcionado pelo calorímetro, afeta a geometria da zona afetada pelo calor e da zona fundida. Para isto, foram feitas soldagens sobre chapas de duas espessuras, utilizando-se o processo TIG. Uma chapa foi mantida no calorímetro e outra fora. A escolha desse processo se deu em virtude dos poucos trabalhos realizados nesta área, mostrando resultados sobre o fluxo térmico em soldas TIG realizadas sem metal de adição. Foi verificado que o calorímetro e a espessura da chapa possuem pouca influencia sobre a região afetada pelo calor e nenhuma influencia sobre a região fundida. Além disso, observou-se que a intensidade da corrente foi fator determinante na penetração da solda.Universidade Federal de UberlândiaBrasilEngenharia MecânicaPonomarov, VolodymyrBezerra de Araújo, DouglasCosta Correia Silva, DiegoCorrêa, Leonardo Muthi2018-03-12T23:22:41Z2018-03-12T23:22:41Z2018-02-27info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfCORRÊA, Leonardo Muthi . Avaliação da influência do calorímetro de água em soldagens TIG. 2018. 38 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2018.https://repositorio.ufu.br/handle/123456789/20875porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-09-28T17:54:54Zoai:repositorio.ufu.br:123456789/20875Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-09-28T17:54:54Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Avaliação da influência do calorímetro de água em soldagens TIG |
title |
Avaliação da influência do calorímetro de água em soldagens TIG |
spellingShingle |
Avaliação da influência do calorímetro de água em soldagens TIG Corrêa, Leonardo Muthi Soldagem Calorimeter Calorímetro Welding CNPQ::ENGENHARIAS |
title_short |
Avaliação da influência do calorímetro de água em soldagens TIG |
title_full |
Avaliação da influência do calorímetro de água em soldagens TIG |
title_fullStr |
Avaliação da influência do calorímetro de água em soldagens TIG |
title_full_unstemmed |
Avaliação da influência do calorímetro de água em soldagens TIG |
title_sort |
Avaliação da influência do calorímetro de água em soldagens TIG |
author |
Corrêa, Leonardo Muthi |
author_facet |
Corrêa, Leonardo Muthi |
author_role |
author |
dc.contributor.none.fl_str_mv |
Ponomarov, Volodymyr Bezerra de Araújo, Douglas Costa Correia Silva, Diego |
dc.contributor.author.fl_str_mv |
Corrêa, Leonardo Muthi |
dc.subject.por.fl_str_mv |
Soldagem Calorimeter Calorímetro Welding CNPQ::ENGENHARIAS |
topic |
Soldagem Calorimeter Calorímetro Welding CNPQ::ENGENHARIAS |
description |
The objective of this work was to verify if the forced cooling provided by the calorimeter affects the geometry of the heat affected zone and the fusion zone. For this, welds were made on plates of two thicknesses using Tungsten Inert Gas process. One plate was held in the calorimeter and the other plate out. The choice of this process was due to the few studies carried out in this area, showing results about the heat flux in TIG welds performed without filler metal. It has been found that the calorimeter and the thickness plate have little influence on the heat affected region and no influence on the fusion region. In addition, it was observed that the intensity of the current was a determining factor in the penetration of the weld. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018-03-12T23:22:41Z 2018-03-12T23:22:41Z 2018-02-27 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
CORRÊA, Leonardo Muthi . Avaliação da influência do calorímetro de água em soldagens TIG. 2018. 38 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2018. https://repositorio.ufu.br/handle/123456789/20875 |
identifier_str_mv |
CORRÊA, Leonardo Muthi . Avaliação da influência do calorímetro de água em soldagens TIG. 2018. 38 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2018. |
url |
https://repositorio.ufu.br/handle/123456789/20875 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Engenharia Mecânica |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Engenharia Mecânica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569692675342336 |