Changes in occlusal vertical dimension in microwave processing of complete dentures.

Detalhes bibliográficos
Autor(a) principal: Barbosa, Débora Barros
Data de Publicação: 2002
Outros Autores: Compagnoni, Marco Antonio [UNESP], Leles, Cláudio Rodrigues
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1590/S0103-64402002000300011
http://hdl.handle.net/11449/67019
Resumo: This study investigated the effect of different microwave curing cycles on the changes in occlusal vertical dimension of complete dentures. Four test groups with 12 maxillary dentures each were evaluated. Groups 1, 2 and 3 were polymerized with different cycles by microwave radiation and Group 4 was the control and cured by water bath. The average pin opening for all groups was less than 0.5 mm. There was no significant difference between the groups polymerized by the microwave method and the control group. However, analyses of the vertical dimension changes showed statistically significant differences between groups 2 (0.276 +/- 0.141 mm) and 3 (0.496 +/- 0.220 mm).
id UNSP_4c8551397d435d7bf31fc310d83d51f7
oai_identifier_str oai:repositorio.unesp.br:11449/67019
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Changes in occlusal vertical dimension in microwave processing of complete dentures.acrylic acid resinpolymeranalysis of variancechemistrycomparative studydenturehumanmethodologymicrowave radiationnonparametric testtooth occlusionAcrylic ResinsAnalysis of VarianceDenture BasesDenture DesignDenture, Complete, UpperHumansMicrowavesPolymersStatistics, NonparametricVertical DimensionThis study investigated the effect of different microwave curing cycles on the changes in occlusal vertical dimension of complete dentures. Four test groups with 12 maxillary dentures each were evaluated. Groups 1, 2 and 3 were polymerized with different cycles by microwave radiation and Group 4 was the control and cured by water bath. The average pin opening for all groups was less than 0.5 mm. There was no significant difference between the groups polymerized by the microwave method and the control group. However, analyses of the vertical dimension changes showed statistically significant differences between groups 2 (0.276 +/- 0.141 mm) and 3 (0.496 +/- 0.220 mm).Universidade Estadual Paulista (Unesp)Barbosa, Débora BarrosCompagnoni, Marco Antonio [UNESP]Leles, Cláudio Rodrigues2014-05-27T11:20:31Z2014-05-27T11:20:31Z2002-11-13info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article197-200application/pdfhttp://dx.doi.org/10.1590/S0103-64402002000300011Brazilian dental journal, v. 13, n. 3, p. 197-200, 2002.0103-6440http://hdl.handle.net/11449/6701910.1590/S0103-64402002000300011S0103-644020020003000112-s2.0-00363629312-s2.0-0036362931.pdf8921196002764597Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengBrazilian Dental Journal0,476info:eu-repo/semantics/openAccess2024-09-27T14:56:51Zoai:repositorio.unesp.br:11449/67019Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestrepositoriounesp@unesp.bropendoar:29462024-09-27T14:56:51Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Changes in occlusal vertical dimension in microwave processing of complete dentures.
title Changes in occlusal vertical dimension in microwave processing of complete dentures.
spellingShingle Changes in occlusal vertical dimension in microwave processing of complete dentures.
Barbosa, Débora Barros
acrylic acid resin
polymer
analysis of variance
chemistry
comparative study
denture
human
methodology
microwave radiation
nonparametric test
tooth occlusion
Acrylic Resins
Analysis of Variance
Denture Bases
Denture Design
Denture, Complete, Upper
Humans
Microwaves
Polymers
Statistics, Nonparametric
Vertical Dimension
title_short Changes in occlusal vertical dimension in microwave processing of complete dentures.
title_full Changes in occlusal vertical dimension in microwave processing of complete dentures.
title_fullStr Changes in occlusal vertical dimension in microwave processing of complete dentures.
title_full_unstemmed Changes in occlusal vertical dimension in microwave processing of complete dentures.
title_sort Changes in occlusal vertical dimension in microwave processing of complete dentures.
author Barbosa, Débora Barros
author_facet Barbosa, Débora Barros
Compagnoni, Marco Antonio [UNESP]
Leles, Cláudio Rodrigues
author_role author
author2 Compagnoni, Marco Antonio [UNESP]
Leles, Cláudio Rodrigues
author2_role author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
dc.contributor.author.fl_str_mv Barbosa, Débora Barros
Compagnoni, Marco Antonio [UNESP]
Leles, Cláudio Rodrigues
dc.subject.por.fl_str_mv acrylic acid resin
polymer
analysis of variance
chemistry
comparative study
denture
human
methodology
microwave radiation
nonparametric test
tooth occlusion
Acrylic Resins
Analysis of Variance
Denture Bases
Denture Design
Denture, Complete, Upper
Humans
Microwaves
Polymers
Statistics, Nonparametric
Vertical Dimension
topic acrylic acid resin
polymer
analysis of variance
chemistry
comparative study
denture
human
methodology
microwave radiation
nonparametric test
tooth occlusion
Acrylic Resins
Analysis of Variance
Denture Bases
Denture Design
Denture, Complete, Upper
Humans
Microwaves
Polymers
Statistics, Nonparametric
Vertical Dimension
description This study investigated the effect of different microwave curing cycles on the changes in occlusal vertical dimension of complete dentures. Four test groups with 12 maxillary dentures each were evaluated. Groups 1, 2 and 3 were polymerized with different cycles by microwave radiation and Group 4 was the control and cured by water bath. The average pin opening for all groups was less than 0.5 mm. There was no significant difference between the groups polymerized by the microwave method and the control group. However, analyses of the vertical dimension changes showed statistically significant differences between groups 2 (0.276 +/- 0.141 mm) and 3 (0.496 +/- 0.220 mm).
publishDate 2002
dc.date.none.fl_str_mv 2002-11-13
2014-05-27T11:20:31Z
2014-05-27T11:20:31Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1590/S0103-64402002000300011
Brazilian dental journal, v. 13, n. 3, p. 197-200, 2002.
0103-6440
http://hdl.handle.net/11449/67019
10.1590/S0103-64402002000300011
S0103-64402002000300011
2-s2.0-0036362931
2-s2.0-0036362931.pdf
8921196002764597
url http://dx.doi.org/10.1590/S0103-64402002000300011
http://hdl.handle.net/11449/67019
identifier_str_mv Brazilian dental journal, v. 13, n. 3, p. 197-200, 2002.
0103-6440
10.1590/S0103-64402002000300011
S0103-64402002000300011
2-s2.0-0036362931
2-s2.0-0036362931.pdf
8921196002764597
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Brazilian Dental Journal
0,476
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 197-200
application/pdf
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv repositoriounesp@unesp.br
_version_ 1813546433474723840

Registros relacionados