Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada

Detalhes bibliográficos
Autor(a) principal: Coelho, Karen Dias
Data de Publicação: 2012
Outros Autores: Pinto, Luiz Antonio de Almeida
Tipo de documento: Artigo
Idioma: por
Título da fonte: Vetor (Online)
Texto Completo: https://periodicos.furg.br/vetor/article/view/2765
Resumo: O trabalho teve como objetivo a caracterização da cinética de secagem do tomate (Lycopersicon esculentum Mill) em camada delgada, e a determinação da reidratação e do teor de licopeno do produto final. O estudo foi realizado em um secador de bandejas com escoamento paralelo do ar, onde as variáveis estudadas foram temperatura do ar de secagem (60, 70 e 80°C) e espessura das amostras (3, 5 e 7 mm). As isotermas de equilíbrio foram determinadas pelo método gravimétrico usando soluções ácidas, e os dados experimentais foram ajustados através da equação de GAB. Nos experimentos de secagem, foi usada a equação de Henderson e Pabis para a obtenção da constante de secagem (K), e os valores de da difusividade efetiva de umidade (DEF) apresentaram-se entre 1,56 a 2,67×10-10 m2 s-1 e entre 4,21 a 8,35×10-11 m2 s-1, sendo os valores da energia de ativação de 16,99 e 30,64 kJ mol-1, respectivamente, para o primeiro e o segundo períodos de taxa decrescente de secagem. Para a reidratação, verificou-se que com menores temperaturas do ar obteve-se uma maior reidratação do produto num menor tempo, e o teor de licopeno também foi maior nessas condições. CHARACTERIZATION OF CONVECTIVE DRYING OF TOMATO (LYCOPERSICON ESCULENTUM MILL) IN THIN LAYER The aim of this work was to characterize the drying kinetics of tomato (Lycopersicon esculentum Mill) in thin layer, and determination of rehydration and lycopene content in the final product. The study was carried out through a tray dryer with air parallel flow, the studied variables were air drying temperature (60, 70 and 80ºC) and the samples thickness (3, 5 and 7 mm). The equilibrium isotherms were carried out by gravimetric method using acid solutions, and for fit of experimental dada was used the GAB. In drying experiments was used the Henderson and Pabis equation to calculate the drying constant (K), and the moisture effective diffusivity (DEFF) values showed in ranges from 1.56 to 2.67×10-10 m2 s-1 and from 4.21 to 8.35×10-11 m2 s-1, and the activation energy values were found in 17 e 30.6 kJ mol-1, respectively, for first and second of drying falling rate periods. For the rehydration, was verified that using lower values of air temperature it had a higher rehydration of the final product in lower time, and the lycopene content was also higher using same conditions.
id FURG-7_a5da4f953e790c969458428ed1241ef0
oai_identifier_str oai:periodicos.furg.br:article/2765
network_acronym_str FURG-7
network_name_str Vetor (Online)
repository_id_str
spelling Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgadaIsotermaLicopenoReidrataçãoSecagemTomate.O trabalho teve como objetivo a caracterização da cinética de secagem do tomate (Lycopersicon esculentum Mill) em camada delgada, e a determinação da reidratação e do teor de licopeno do produto final. O estudo foi realizado em um secador de bandejas com escoamento paralelo do ar, onde as variáveis estudadas foram temperatura do ar de secagem (60, 70 e 80°C) e espessura das amostras (3, 5 e 7 mm). As isotermas de equilíbrio foram determinadas pelo método gravimétrico usando soluções ácidas, e os dados experimentais foram ajustados através da equação de GAB. Nos experimentos de secagem, foi usada a equação de Henderson e Pabis para a obtenção da constante de secagem (K), e os valores de da difusividade efetiva de umidade (DEF) apresentaram-se entre 1,56 a 2,67×10-10 m2 s-1 e entre 4,21 a 8,35×10-11 m2 s-1, sendo os valores da energia de ativação de 16,99 e 30,64 kJ mol-1, respectivamente, para o primeiro e o segundo períodos de taxa decrescente de secagem. Para a reidratação, verificou-se que com menores temperaturas do ar obteve-se uma maior reidratação do produto num menor tempo, e o teor de licopeno também foi maior nessas condições. CHARACTERIZATION OF CONVECTIVE DRYING OF TOMATO (LYCOPERSICON ESCULENTUM MILL) IN THIN LAYER The aim of this work was to characterize the drying kinetics of tomato (Lycopersicon esculentum Mill) in thin layer, and determination of rehydration and lycopene content in the final product. The study was carried out through a tray dryer with air parallel flow, the studied variables were air drying temperature (60, 70 and 80ºC) and the samples thickness (3, 5 and 7 mm). The equilibrium isotherms were carried out by gravimetric method using acid solutions, and for fit of experimental dada was used the GAB. In drying experiments was used the Henderson and Pabis equation to calculate the drying constant (K), and the moisture effective diffusivity (DEFF) values showed in ranges from 1.56 to 2.67×10-10 m2 s-1 and from 4.21 to 8.35×10-11 m2 s-1, and the activation energy values were found in 17 e 30.6 kJ mol-1, respectively, for first and second of drying falling rate periods. For the rehydration, was verified that using lower values of air temperature it had a higher rehydration of the final product in lower time, and the lycopene content was also higher using same conditions.Universidade Federal do Rio Grande2012-10-22info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.furg.br/vetor/article/view/2765VETOR - Journal of Exact Sciences and Engineering; Vol. 21 No. 2 (2011); 5-21VETOR - Revista de Ciências Exatas e Engenharias; v. 21 n. 2 (2011); 5-212358-34520102-7352reponame:Vetor (Online)instname:Universidade Federal do Rio Grande (FURG)instacron:FURGporhttps://periodicos.furg.br/vetor/article/view/2765/1701Copyright (c) 2014 VETOR - Revista de Ciências Exatas e Engenhariasinfo:eu-repo/semantics/openAccessCoelho, Karen DiasPinto, Luiz Antonio de Almeida2023-03-22T15:42:44Zoai:periodicos.furg.br:article/2765Revistahttps://periodicos.furg.br/vetorPUBhttps://periodicos.furg.br/vetor/oaigmplatt@furg.br2358-34520102-7352opendoar:2023-03-22T15:42:44Vetor (Online) - Universidade Federal do Rio Grande (FURG)false
dc.title.none.fl_str_mv Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
title Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
spellingShingle Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
Coelho, Karen Dias
Isoterma
Licopeno
Reidratação
Secagem
Tomate.
title_short Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
title_full Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
title_fullStr Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
title_full_unstemmed Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
title_sort Caracterização da secagem convectiva de tomate (Lycopersicon Esculentum Mill) em camada delgada
author Coelho, Karen Dias
author_facet Coelho, Karen Dias
Pinto, Luiz Antonio de Almeida
author_role author
author2 Pinto, Luiz Antonio de Almeida
author2_role author
dc.contributor.author.fl_str_mv Coelho, Karen Dias
Pinto, Luiz Antonio de Almeida
dc.subject.por.fl_str_mv Isoterma
Licopeno
Reidratação
Secagem
Tomate.
topic Isoterma
Licopeno
Reidratação
Secagem
Tomate.
description O trabalho teve como objetivo a caracterização da cinética de secagem do tomate (Lycopersicon esculentum Mill) em camada delgada, e a determinação da reidratação e do teor de licopeno do produto final. O estudo foi realizado em um secador de bandejas com escoamento paralelo do ar, onde as variáveis estudadas foram temperatura do ar de secagem (60, 70 e 80°C) e espessura das amostras (3, 5 e 7 mm). As isotermas de equilíbrio foram determinadas pelo método gravimétrico usando soluções ácidas, e os dados experimentais foram ajustados através da equação de GAB. Nos experimentos de secagem, foi usada a equação de Henderson e Pabis para a obtenção da constante de secagem (K), e os valores de da difusividade efetiva de umidade (DEF) apresentaram-se entre 1,56 a 2,67×10-10 m2 s-1 e entre 4,21 a 8,35×10-11 m2 s-1, sendo os valores da energia de ativação de 16,99 e 30,64 kJ mol-1, respectivamente, para o primeiro e o segundo períodos de taxa decrescente de secagem. Para a reidratação, verificou-se que com menores temperaturas do ar obteve-se uma maior reidratação do produto num menor tempo, e o teor de licopeno também foi maior nessas condições. CHARACTERIZATION OF CONVECTIVE DRYING OF TOMATO (LYCOPERSICON ESCULENTUM MILL) IN THIN LAYER The aim of this work was to characterize the drying kinetics of tomato (Lycopersicon esculentum Mill) in thin layer, and determination of rehydration and lycopene content in the final product. The study was carried out through a tray dryer with air parallel flow, the studied variables were air drying temperature (60, 70 and 80ºC) and the samples thickness (3, 5 and 7 mm). The equilibrium isotherms were carried out by gravimetric method using acid solutions, and for fit of experimental dada was used the GAB. In drying experiments was used the Henderson and Pabis equation to calculate the drying constant (K), and the moisture effective diffusivity (DEFF) values showed in ranges from 1.56 to 2.67×10-10 m2 s-1 and from 4.21 to 8.35×10-11 m2 s-1, and the activation energy values were found in 17 e 30.6 kJ mol-1, respectively, for first and second of drying falling rate periods. For the rehydration, was verified that using lower values of air temperature it had a higher rehydration of the final product in lower time, and the lycopene content was also higher using same conditions.
publishDate 2012
dc.date.none.fl_str_mv 2012-10-22
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.furg.br/vetor/article/view/2765
url https://periodicos.furg.br/vetor/article/view/2765
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://periodicos.furg.br/vetor/article/view/2765/1701
dc.rights.driver.fl_str_mv Copyright (c) 2014 VETOR - Revista de Ciências Exatas e Engenharias
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2014 VETOR - Revista de Ciências Exatas e Engenharias
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal do Rio Grande
publisher.none.fl_str_mv Universidade Federal do Rio Grande
dc.source.none.fl_str_mv VETOR - Journal of Exact Sciences and Engineering; Vol. 21 No. 2 (2011); 5-21
VETOR - Revista de Ciências Exatas e Engenharias; v. 21 n. 2 (2011); 5-21
2358-3452
0102-7352
reponame:Vetor (Online)
instname:Universidade Federal do Rio Grande (FURG)
instacron:FURG
instname_str Universidade Federal do Rio Grande (FURG)
instacron_str FURG
institution FURG
reponame_str Vetor (Online)
collection Vetor (Online)
repository.name.fl_str_mv Vetor (Online) - Universidade Federal do Rio Grande (FURG)
repository.mail.fl_str_mv gmplatt@furg.br
_version_ 1797041761255686144