Uniform flow of viscoelastic fluids past a confined falling cylinder

• Autor(a) principal: Afonso, A. M.
• Data de Publicação: 2008
• Outros Autores: Alves, M. A., Pinho, Fernando, Oliveira, Paulo J.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.6/637
• topic: Falling cylinder - Viscoelastic - UCM; Oldroyd-B; FENE-CR; PTT; Giesekus; Negative wake; Numerical simulations

Uniform steady flow of viscoelastic fluids past a cylinder placed between two moving parallel plates is investigated numerically with a finite-volume method. This configuration is equivalent to the steady settling of a cylinder in a viscoelastic fluid, and here, a 50% blockage ratio is considered. Five constitutive models are employed (UCM, Oldroyd-B, FENE-CR, PTT and Giesekus) to assess the effect of rheological properties on the flow kinematics and wake patterns. Simulations were carried out under creeping flow conditions, using very fine meshes, especially in the wake of the cylinder where large normal stresses are observed at high Deborah numbers. Some of the results are compared with numerical data from the literature, mainly in terms of a drag coefficient, and significant discrepancies are found, especially for the constant-viscosity constitutive models. Accurate solutions could be obtained up to maximum Deborah numbers clearly in excess of those reported in the literature, especially with the PTT and FENECR models. The existence or not of a negative wake is identified for each set of model parameters.