Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints

• Autor(a) principal: Silva, J.O.S.
• Data de Publicação: 2019
• Outros Autores: Campilho, R.D.S.G., Rocha, R.J.B., Silva, F.J.G.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.22/15913
• topic: Adhesive joints; Stepped-lap joint; Finite Element Analysis; Cohesive Zone Models; Stress analysis

Several adhesive joint configurations are available, namely butt joints, single-lap joints (SLJ), double-lap joints and scarf joints. Stepped-lap joints, which are not so studied, consist of a finite number of steps in the bonded area, possessing stress concentrations at all step edges instead of only at the bonded length edges. Stepped-lap joints increase the maximum load (Pm) over SLJ. The present study experimentally and numerically evaluates the static tensile strength of SLJ and stepped-lap joints bonded with the moderately ductile adhesive Araldite® 2015, considering varying values of overlap length (LO). A Finite Element Method (FEM) analysis was carried out to compare through-thickness normal (σy) and shear (τxy) stresses in the bondline between joint configurations. Additionally, a Cohesive Zone Modelling (CZM) analysis was considered to study the failure modes and to evaluate the CZM technique’s accuracy. Between SLJ and stepped-lap joints, the improved stress distributions of the stepped-lap joints resulted in higher joint performance, especially for higher LO. The CZM model revealed to be accurate in predicting Pm.