Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives

Detalhes bibliográficos
Autor(a) principal: Valente, Bruno F. A.
Data de Publicação: 2022
Outros Autores: Silvestre, Armando J. D., Neto, Carlos Pascoal, Vilela, Carla, Freire, Carmen S. R.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10773/35960
Resumo: Green composites made of bioplastics reinforced with natural fibers have gained considerable attention over recent years. However, the use of natural fibers in composites usually compromise some key properties, such as the impact strength and the processability of the final materials. In the present study, two distinct additives, namely an epoxidized linseed oil (ELO) and a sugar-based surfactant, viz. GlucoPure® Sense (GPS), were tested in composite formulations of poly(lactic acid) (PLA) or poly(hydroxybutyrate) (PHB) reinforced with micronized pulp fibers. Both additives showed a plasticizing effect, which led to a decrease in the Young’s and flexural moduli and strengths. At the same time, the elongation and flexural strain at break were considerably improved on some formulations. The melt flow rate was also remarkably improved with the incorporation of the additives. In the PHB-based composites, an increment of 230% was observed upon incorporation of 7.5 wt.% ELO and, in composites based on PLA, an increase of around 155% was achieved with the introduction of 2.5 wt.% GPS. ELO also increased the impact strength to a maximum of 29 kJ m−2 , in formulations with PLA. For most composites, a faster degradation rate was observed on the formulations with the additives, reaching, in the case of PHB composites with GPS, a noteworthy weight loss over 75% under burial testing in compost medium at room temperature.
id RCAP_78f30dc8557341d8c7333bfc4a1d0b83
oai_identifier_str oai:ria.ua.pt:10773/35960
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str
spelling Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additivesGreen compositesPoly(lactic acid)Poly(hydroxybutyrate)CelluloseMicronized fibersEpoxidized linseed oilSugar-based surfactantMechanical propertiesThermal propertiesBiodegradabilityGreen composites made of bioplastics reinforced with natural fibers have gained considerable attention over recent years. However, the use of natural fibers in composites usually compromise some key properties, such as the impact strength and the processability of the final materials. In the present study, two distinct additives, namely an epoxidized linseed oil (ELO) and a sugar-based surfactant, viz. GlucoPure® Sense (GPS), were tested in composite formulations of poly(lactic acid) (PLA) or poly(hydroxybutyrate) (PHB) reinforced with micronized pulp fibers. Both additives showed a plasticizing effect, which led to a decrease in the Young’s and flexural moduli and strengths. At the same time, the elongation and flexural strain at break were considerably improved on some formulations. The melt flow rate was also remarkably improved with the incorporation of the additives. In the PHB-based composites, an increment of 230% was observed upon incorporation of 7.5 wt.% ELO and, in composites based on PLA, an increase of around 155% was achieved with the introduction of 2.5 wt.% GPS. ELO also increased the impact strength to a maximum of 29 kJ m−2 , in formulations with PLA. For most composites, a faster degradation rate was observed on the formulations with the additives, reaching, in the case of PHB composites with GPS, a noteworthy weight loss over 75% under burial testing in compost medium at room temperature.MDPI2023-01-23T18:00:50Z2022-09-01T00:00:00Z2022-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/10773/35960eng2073-436010.3390/polym14173451Valente, Bruno F. A.Silvestre, Armando J. D.Neto, Carlos PascoalVilela, CarlaFreire, Carmen S. R.info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-07-17T04:16:48ZPortal AgregadorONG
dc.title.none.fl_str_mv Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
title Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
spellingShingle Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
Valente, Bruno F. A.
Green composites
Poly(lactic acid)
Poly(hydroxybutyrate)
Cellulose
Micronized fibers
Epoxidized linseed oil
Sugar-based surfactant
Mechanical properties
Thermal properties
Biodegradability
title_short Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
title_full Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
title_fullStr Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
title_full_unstemmed Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
title_sort Improving the processability and performance of micronized fiber-reinforced green composites through the use of biobased additives
author Valente, Bruno F. A.
author_facet Valente, Bruno F. A.
Silvestre, Armando J. D.
Neto, Carlos Pascoal
Vilela, Carla
Freire, Carmen S. R.
author_role author
author2 Silvestre, Armando J. D.
Neto, Carlos Pascoal
Vilela, Carla
Freire, Carmen S. R.
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Valente, Bruno F. A.
Silvestre, Armando J. D.
Neto, Carlos Pascoal
Vilela, Carla
Freire, Carmen S. R.
dc.subject.por.fl_str_mv Green composites
Poly(lactic acid)
Poly(hydroxybutyrate)
Cellulose
Micronized fibers
Epoxidized linseed oil
Sugar-based surfactant
Mechanical properties
Thermal properties
Biodegradability
topic Green composites
Poly(lactic acid)
Poly(hydroxybutyrate)
Cellulose
Micronized fibers
Epoxidized linseed oil
Sugar-based surfactant
Mechanical properties
Thermal properties
Biodegradability
description Green composites made of bioplastics reinforced with natural fibers have gained considerable attention over recent years. However, the use of natural fibers in composites usually compromise some key properties, such as the impact strength and the processability of the final materials. In the present study, two distinct additives, namely an epoxidized linseed oil (ELO) and a sugar-based surfactant, viz. GlucoPure® Sense (GPS), were tested in composite formulations of poly(lactic acid) (PLA) or poly(hydroxybutyrate) (PHB) reinforced with micronized pulp fibers. Both additives showed a plasticizing effect, which led to a decrease in the Young’s and flexural moduli and strengths. At the same time, the elongation and flexural strain at break were considerably improved on some formulations. The melt flow rate was also remarkably improved with the incorporation of the additives. In the PHB-based composites, an increment of 230% was observed upon incorporation of 7.5 wt.% ELO and, in composites based on PLA, an increase of around 155% was achieved with the introduction of 2.5 wt.% GPS. ELO also increased the impact strength to a maximum of 29 kJ m−2 , in formulations with PLA. For most composites, a faster degradation rate was observed on the formulations with the additives, reaching, in the case of PHB composites with GPS, a noteworthy weight loss over 75% under burial testing in compost medium at room temperature.
publishDate 2022
dc.date.none.fl_str_mv 2022-09-01T00:00:00Z
2022-09
2023-01-23T18:00:50Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10773/35960
url http://hdl.handle.net/10773/35960
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 2073-4360
10.3390/polym14173451
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv MDPI
publisher.none.fl_str_mv MDPI
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1777303590933626880