Pre-strain effect on twist springback of a 3D P-channel in deep drawing

• Autor(a) principal: Chen, Shanshan
• Data de Publicação: 2021
• Outros Autores: Liao, Juan, Xiang, Hongliang, Xue, Xin, Pereira, António B.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10773/37699
• topic: Strain path; Pre-strain; Twist springback; HAH

With the widely use of high-strength steel sheets in the automotive industry, the twist springback phenomenon of the steel sheets under multi-step forming conditions has received extensive attention. In this work, the Dual Phase steel DP500 is taken as the research object to investigate the complex non-linear elastoplastic behaviors and twist springback under two-step loading paths. The large specimen with a pre-strain of 4% true strain in rolling direction is carried out on a large tensile testing machine, and several specific blanks are extracted from it at different directions for a subsequent P-channel forming. The influence of twist springback associated with the pre-strain is analyzed. The finite element model based on the non-linear elastic model and the homogeneous anisotropic hardening model (HAH) is also established for the springback prediction and stress analysis. The results indicate that the pre-strain has a considerable impact on the twist springback. The non-linear strain path changes resulted from pre-straining not only influence the residual stress but also affect the elastic modulus distribution.