Fast and interference free determination of calcium and magnesium in honeys by solid phase extraction followed by flame atomic absorption spectrometry

• Autor(a) principal: Pohl,Pawel
• Data de Publicação: 2012
• Outros Autores: Stecka,Helena, Jamroz,Piotr
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Journal of the Brazilian Chemical Society (Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0103-50532012000400017
• topic: Ca; Mg; honey; FAAS; solid phase extraction; ion exchange; sequential elution

A sample preparation procedure based on the solid phase extraction and the two-step elution was developed for the determination of the total concentrations of Ca and Mg in bee honeys. The honey samples were treated as follows: the 5.0% (m/v) sample solutions (50 mL) were passed at the flow rate of 20 mL min-1 through the resin beds of Dowex 50W×8-400 to retain the Ca(II) and Mg(II) ions and separate them from the matrix of glucose and fructose in addition to the anionic minerals. Afterwards, 20 mL of a 0.5 mol L-1 HNO3 solution was used to remove the K and Na ions. Finally, Ca and Mg were eluted prior to the measurements of their concentrations by flame atomic absorption spectrometry (FAAS) using 5 mL of a 2.0 mol L-1 HCl solution. The proposed sample preparation procedure was fast (30 min) and enabled to measure the concentrations of Ca and Mg in honey with the precision of 1-5% and the accuracy of 1-3%. The limits of detection of 24 ng g-1 of Ca and 4.4 ng g-1 of Mg were obtained for FAAS with this procedure.