Efeito do ângulo do jato nas características técnicas de um canhão hidráulico
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Outros Autores: | , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFLA |
Texto Completo: | http://repositorio.ufla.br/jspui/handle/1/11577 |
Resumo: | The effect of different trajectory angles of a gun sprinkler associated with different nozzle diameters and working pressures on the radius of throw and water distribution profile were assessed in this study. The technical characterization of the gun sprinkler was carried out at a sprinkler test bench of the Universidade Federal de Lavras, at Lavras, MG, for 24 different working conditions. In function of nozzle diameter (18 and 22 mm), service pressure (294, 392, 490 and 588 kPa) and trajectory angle (16, 22 and 28º), a potential equation was adjusted to estimate the radius of throw. Furthermore, along the radius of throw the percentage distribution of the amount of water applied was analysed. For low working pressures associated with trajectory angle of 16º, higher reductions were observed on the radius of throw; from the 28º trajectory angle, for every 3º drop of the trajectory angle the radius of throw is reduced by approximately 3.4 to 4.0%; for trajectory angles higher than 22º associated with working pressures higher than 392 kPa, the amount of water applied from the gun sprinkler is more between 60 and 80% of radius of throw. |
id |
UFLA_7a0104abbb989dd3ba3b21dd916bf614 |
---|---|
oai_identifier_str |
oai:localhost:1/11577 |
network_acronym_str |
UFLA |
network_name_str |
Repositório Institucional da UFLA |
repository_id_str |
|
spelling |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulicoEffect of trajectory angle on technical characteristics of a gun sprinklerIrrigação por aspersão - Modelos matemáticosPlantas - Efeito do ventoDistribuição de águaSprinkler irrigation - Mathematical modelsPlant - Effect of windWater distributionThe effect of different trajectory angles of a gun sprinkler associated with different nozzle diameters and working pressures on the radius of throw and water distribution profile were assessed in this study. The technical characterization of the gun sprinkler was carried out at a sprinkler test bench of the Universidade Federal de Lavras, at Lavras, MG, for 24 different working conditions. In function of nozzle diameter (18 and 22 mm), service pressure (294, 392, 490 and 588 kPa) and trajectory angle (16, 22 and 28º), a potential equation was adjusted to estimate the radius of throw. Furthermore, along the radius of throw the percentage distribution of the amount of water applied was analysed. For low working pressures associated with trajectory angle of 16º, higher reductions were observed on the radius of throw; from the 28º trajectory angle, for every 3º drop of the trajectory angle the radius of throw is reduced by approximately 3.4 to 4.0%; for trajectory angles higher than 22º associated with working pressures higher than 392 kPa, the amount of water applied from the gun sprinkler is more between 60 and 80% of radius of throw.Avaliaram-se os efeitos de diferentes ângulos de saída do jato de água de um canhão hidráulico, combinados com diferentes diâmetros de bocais e pressões de serviço, sobre o raio de alcance e perfil radial de distribuição de água. A caracterização técnica do canhão hidráulico foi realizada em bancada de ensaios de aspersores da Universidade Federal de Lavras, em Lavras, MG, totalizando 24 diferentes condições operacionais. O raio de alcance do aspersor foi estimado pelo ajuste de uma equação potencial em função do diâmetro do bocal (18 e 22 mm), da pressão de serviço (294, 392, 490 e 588 kPa) e do ângulo de lançamento do jato de água (16, 22 e 28º). Além disto, foi realizada uma análise percentual da distribuição do volume de água aplicado ao longo do raio de alcance do aspersor. As reduções no alcance horizontal do jato de água foram mais pronunciadas em condições de baixas pressões e para o ângulo de jato de 16º; ocorre uma redução no raio de alcance do aspersor de 3,4 a 4,0%, a cada 3º de redução do ângulo de lançamento de 28º; ângulos de lançamento do jato maiores que 22º, associados com pressões de serviço superiores a 392 kPa, resultam em maiores volumes de água aplicados entre 60 e 80% do raio de alcance do aspersor.Universidade Federal de Campina Grande2016-08-11T12:41:05Z2016-08-11T12:41:05Z2013-04-12info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfPRADO, G. do et al. Efeito do ângulo do jato nas características técnicas de um canhão hidráulico. Revista Brasileira de Engenharia Agrícola e Ambiental, Campina Grande, v.17, n.7, p.689–697, jul. 2013.http://repositorio.ufla.br/jspui/handle/1/11577Revista Brasileira de Engenharia Agrícola e Ambientalreponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLAPrado, Giuliani doFaria, Lessandro CollOliveira, Henrique Fonseca Elias deinfo:eu-repo/semantics/openAccesspor2016-08-11T12:41:33Zoai:localhost:1/11577Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2016-08-11T12:41:33Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false |
dc.title.none.fl_str_mv |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico Effect of trajectory angle on technical characteristics of a gun sprinkler |
title |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico |
spellingShingle |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico Prado, Giuliani do Irrigação por aspersão - Modelos matemáticos Plantas - Efeito do vento Distribuição de água Sprinkler irrigation - Mathematical models Plant - Effect of wind Water distribution |
title_short |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico |
title_full |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico |
title_fullStr |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico |
title_full_unstemmed |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico |
title_sort |
Efeito do ângulo do jato nas características técnicas de um canhão hidráulico |
author |
Prado, Giuliani do |
author_facet |
Prado, Giuliani do Faria, Lessandro Coll Oliveira, Henrique Fonseca Elias de |
author_role |
author |
author2 |
Faria, Lessandro Coll Oliveira, Henrique Fonseca Elias de |
author2_role |
author author |
dc.contributor.author.fl_str_mv |
Prado, Giuliani do Faria, Lessandro Coll Oliveira, Henrique Fonseca Elias de |
dc.subject.por.fl_str_mv |
Irrigação por aspersão - Modelos matemáticos Plantas - Efeito do vento Distribuição de água Sprinkler irrigation - Mathematical models Plant - Effect of wind Water distribution |
topic |
Irrigação por aspersão - Modelos matemáticos Plantas - Efeito do vento Distribuição de água Sprinkler irrigation - Mathematical models Plant - Effect of wind Water distribution |
description |
The effect of different trajectory angles of a gun sprinkler associated with different nozzle diameters and working pressures on the radius of throw and water distribution profile were assessed in this study. The technical characterization of the gun sprinkler was carried out at a sprinkler test bench of the Universidade Federal de Lavras, at Lavras, MG, for 24 different working conditions. In function of nozzle diameter (18 and 22 mm), service pressure (294, 392, 490 and 588 kPa) and trajectory angle (16, 22 and 28º), a potential equation was adjusted to estimate the radius of throw. Furthermore, along the radius of throw the percentage distribution of the amount of water applied was analysed. For low working pressures associated with trajectory angle of 16º, higher reductions were observed on the radius of throw; from the 28º trajectory angle, for every 3º drop of the trajectory angle the radius of throw is reduced by approximately 3.4 to 4.0%; for trajectory angles higher than 22º associated with working pressures higher than 392 kPa, the amount of water applied from the gun sprinkler is more between 60 and 80% of radius of throw. |
publishDate |
2013 |
dc.date.none.fl_str_mv |
2013-04-12 2016-08-11T12:41:05Z 2016-08-11T12:41:05Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
PRADO, G. do et al. Efeito do ângulo do jato nas características técnicas de um canhão hidráulico. Revista Brasileira de Engenharia Agrícola e Ambiental, Campina Grande, v.17, n.7, p.689–697, jul. 2013. http://repositorio.ufla.br/jspui/handle/1/11577 |
identifier_str_mv |
PRADO, G. do et al. Efeito do ângulo do jato nas características técnicas de um canhão hidráulico. Revista Brasileira de Engenharia Agrícola e Ambiental, Campina Grande, v.17, n.7, p.689–697, jul. 2013. |
url |
http://repositorio.ufla.br/jspui/handle/1/11577 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Campina Grande |
publisher.none.fl_str_mv |
Universidade Federal de Campina Grande |
dc.source.none.fl_str_mv |
Revista Brasileira de Engenharia Agrícola e Ambiental reponame:Repositório Institucional da UFLA instname:Universidade Federal de Lavras (UFLA) instacron:UFLA |
instname_str |
Universidade Federal de Lavras (UFLA) |
instacron_str |
UFLA |
institution |
UFLA |
reponame_str |
Repositório Institucional da UFLA |
collection |
Repositório Institucional da UFLA |
repository.name.fl_str_mv |
Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA) |
repository.mail.fl_str_mv |
nivaldo@ufla.br || repositorio.biblioteca@ufla.br |
_version_ |
1784549969066196992 |