Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy

Detalhes bibliográficos
Autor(a) principal: Pelegrini, Leandro
Data de Publicação: 2015
Outros Autores: Bittencourt, Sérgio Deitos, Pauletti, Philippe, Verney, Jose Carlos Krause de, Dias, Moisés de Mattos, Schaeffer, Lirio
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UFRGS
Texto Completo: http://hdl.handle.net/10183/132785
Resumo: In this study the soft magnetic alloy Fe-3Si-0.75P (wt%) was obtained by mechanical alloying through powder metallurgy. The processing included the formulation of metallic powder, wet milling for 1 h, 3 h, 6h and 9 h, in an attritor mill using alcohol P.A. as a lubricant. Cold compaction was then performed in a floating die under 600 MPa pressure and, finally the ring-shaped test specimens were sintered at 1150 °C for 1h. The electrical, physical and magnetic properties were then analyzed using the following assays: Laser granulometry, density, metallography, hysteresis curve and AC permeability, resistivity and XRD. The results showed a strong influence of milling time on magnetic properties of the alloy. There was a decrease in grain size with the milling time, which is likely the cause of increased in magnetic properties.
id UFRGS-2_ce6e5b5accd249855ac5b5f4591e9860
oai_identifier_str oai:www.lume.ufrgs.br:10183/132785
network_acronym_str UFRGS-2
network_name_str Repositório Institucional da UFRGS
repository_id_str
spelling Pelegrini, LeandroBittencourt, Sérgio DeitosPauletti, PhilippeVerney, Jose Carlos Krause deDias, Moisés de MattosSchaeffer, Lirio2016-02-19T02:05:12Z20151516-1439http://hdl.handle.net/10183/132785000984458In this study the soft magnetic alloy Fe-3Si-0.75P (wt%) was obtained by mechanical alloying through powder metallurgy. The processing included the formulation of metallic powder, wet milling for 1 h, 3 h, 6h and 9 h, in an attritor mill using alcohol P.A. as a lubricant. Cold compaction was then performed in a floating die under 600 MPa pressure and, finally the ring-shaped test specimens were sintered at 1150 °C for 1h. The electrical, physical and magnetic properties were then analyzed using the following assays: Laser granulometry, density, metallography, hysteresis curve and AC permeability, resistivity and XRD. The results showed a strong influence of milling time on magnetic properties of the alloy. There was a decrease in grain size with the milling time, which is likely the cause of increased in magnetic properties.application/pdfengMaterials research : ibero-american journal of materials. São Carlos, SP. Vol. 18, n. 5 (Sept./Oct. 2015), p. 1070-1076Metalurgia do póLigas de ferro-silícioMateriais magnéticosPowder metallurgyMechanical alloyingSoft magnetic materialsInfluence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloyinfo:eu-repo/semantics/articleinfo:eu-repo/semantics/otherinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRGSinstname:Universidade Federal do Rio Grande do Sul (UFRGS)instacron:UFRGSORIGINAL000984458.pdf000984458.pdfTexto completo (inglês)application/pdf2485316http://www.lume.ufrgs.br/bitstream/10183/132785/1/000984458.pdf28d4cd09fd00d96c491bc35d12976ea2MD51TEXT000984458.pdf.txt000984458.pdf.txtExtracted Texttext/plain26339http://www.lume.ufrgs.br/bitstream/10183/132785/2/000984458.pdf.txt4c7f6201a5996705b96dd4ead2de1157MD52THUMBNAIL000984458.pdf.jpg000984458.pdf.jpgGenerated Thumbnailimage/jpeg1995http://www.lume.ufrgs.br/bitstream/10183/132785/3/000984458.pdf.jpg381cc379f81e44df37f2d2fce7102452MD5310183/1327852021-09-18 04:45:47.158054oai:www.lume.ufrgs.br:10183/132785Repositório de PublicaçõesPUBhttps://lume.ufrgs.br/oai/requestopendoar:2021-09-18T07:45:47Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)false
dc.title.pt_BR.fl_str_mv Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
title Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
spellingShingle Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
Pelegrini, Leandro
Metalurgia do pó
Ligas de ferro-silício
Materiais magnéticos
Powder metallurgy
Mechanical alloying
Soft magnetic materials
title_short Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
title_full Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
title_fullStr Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
title_full_unstemmed Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
title_sort Influence of milling time during the mechanical alloying process on the properties of Fe-3Si-0.75P alloy
author Pelegrini, Leandro
author_facet Pelegrini, Leandro
Bittencourt, Sérgio Deitos
Pauletti, Philippe
Verney, Jose Carlos Krause de
Dias, Moisés de Mattos
Schaeffer, Lirio
author_role author
author2 Bittencourt, Sérgio Deitos
Pauletti, Philippe
Verney, Jose Carlos Krause de
Dias, Moisés de Mattos
Schaeffer, Lirio
author2_role author
author
author
author
author
dc.contributor.author.fl_str_mv Pelegrini, Leandro
Bittencourt, Sérgio Deitos
Pauletti, Philippe
Verney, Jose Carlos Krause de
Dias, Moisés de Mattos
Schaeffer, Lirio
dc.subject.por.fl_str_mv Metalurgia do pó
Ligas de ferro-silício
Materiais magnéticos
topic Metalurgia do pó
Ligas de ferro-silício
Materiais magnéticos
Powder metallurgy
Mechanical alloying
Soft magnetic materials
dc.subject.eng.fl_str_mv Powder metallurgy
Mechanical alloying
Soft magnetic materials
description In this study the soft magnetic alloy Fe-3Si-0.75P (wt%) was obtained by mechanical alloying through powder metallurgy. The processing included the formulation of metallic powder, wet milling for 1 h, 3 h, 6h and 9 h, in an attritor mill using alcohol P.A. as a lubricant. Cold compaction was then performed in a floating die under 600 MPa pressure and, finally the ring-shaped test specimens were sintered at 1150 °C for 1h. The electrical, physical and magnetic properties were then analyzed using the following assays: Laser granulometry, density, metallography, hysteresis curve and AC permeability, resistivity and XRD. The results showed a strong influence of milling time on magnetic properties of the alloy. There was a decrease in grain size with the milling time, which is likely the cause of increased in magnetic properties.
publishDate 2015
dc.date.issued.fl_str_mv 2015
dc.date.accessioned.fl_str_mv 2016-02-19T02:05:12Z
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/other
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10183/132785
dc.identifier.issn.pt_BR.fl_str_mv 1516-1439
dc.identifier.nrb.pt_BR.fl_str_mv 000984458
identifier_str_mv 1516-1439
000984458
url http://hdl.handle.net/10183/132785
dc.language.iso.fl_str_mv eng
language eng
dc.relation.ispartof.pt_BR.fl_str_mv Materials research : ibero-american journal of materials. São Carlos, SP. Vol. 18, n. 5 (Sept./Oct. 2015), p. 1070-1076
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRGS
instname:Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
instname_str Universidade Federal do Rio Grande do Sul (UFRGS)
instacron_str UFRGS
institution UFRGS
reponame_str Repositório Institucional da UFRGS
collection Repositório Institucional da UFRGS
bitstream.url.fl_str_mv http://www.lume.ufrgs.br/bitstream/10183/132785/1/000984458.pdf
http://www.lume.ufrgs.br/bitstream/10183/132785/2/000984458.pdf.txt
http://www.lume.ufrgs.br/bitstream/10183/132785/3/000984458.pdf.jpg
bitstream.checksum.fl_str_mv 28d4cd09fd00d96c491bc35d12976ea2
4c7f6201a5996705b96dd4ead2de1157
381cc379f81e44df37f2d2fce7102452
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)
repository.mail.fl_str_mv
_version_ 1801224894803869696

Registros relacionados