Uma contribuição ao método de síntese modal experimetal
Autor(a) principal: | |
---|---|
Data de Publicação: | 2006 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14782 |
Resumo: | The determination of the dynamic parameters of great or complex structures can be made using modal synthesis methods subdividing the complete structure in substructures. The employment of this method may be done by using analytical or experimental procedures. Generally speaking, poor eigenvalues and eigenvectors may be identified using experimental modal synthesis methods due to a normalization deficient process of the modal bases and to the low orthogonality condition of the identified bases. The contribution of this current work is about the improvement of the great or complex structures dynamic identification process by using the experimental modal synthesis method. The basis of this research methodology is the SMFR (Modal Synthesis with Residual Flexibilities) method and an identification of the physical matrices of the system by using the experimental FRF (Frequency Response Function), called ACS (Simultaneous Curve Fitting) method. These matrices contribute to the improvement of the orthogonality conditions and normalization of the experimental modal bases. Simultaneously, two new methods (CSME and CSMF) for the automatic choice of the used substructures modal bases in the modal synthesis process have been developed. The validation procedures of these methodologies were developed by using examples of numerical simulation and experimental models. Using CSMF method, it was possible to improve the modal choice process, automatizing and minimizing the interference of the user in the modal synthesis method. In the case of experimental data with high level noise, the recommended is the iterative method. |
id |
UFU_1f1e0dd230684f3303ebeab09dc13fbf |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14782 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:39:51Z2007-07-132016-06-22T18:39:51Z2006-12-08JUNQUEIRA, Manoel Moraes. A contribution for the experimental modal synthesis method. 2006. 259 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2006.https://repositorio.ufu.br/handle/123456789/14782The determination of the dynamic parameters of great or complex structures can be made using modal synthesis methods subdividing the complete structure in substructures. The employment of this method may be done by using analytical or experimental procedures. Generally speaking, poor eigenvalues and eigenvectors may be identified using experimental modal synthesis methods due to a normalization deficient process of the modal bases and to the low orthogonality condition of the identified bases. The contribution of this current work is about the improvement of the great or complex structures dynamic identification process by using the experimental modal synthesis method. The basis of this research methodology is the SMFR (Modal Synthesis with Residual Flexibilities) method and an identification of the physical matrices of the system by using the experimental FRF (Frequency Response Function), called ACS (Simultaneous Curve Fitting) method. These matrices contribute to the improvement of the orthogonality conditions and normalization of the experimental modal bases. Simultaneously, two new methods (CSME and CSMF) for the automatic choice of the used substructures modal bases in the modal synthesis process have been developed. The validation procedures of these methodologies were developed by using examples of numerical simulation and experimental models. Using CSMF method, it was possible to improve the modal choice process, automatizing and minimizing the interference of the user in the modal synthesis method. In the case of experimental data with high level noise, the recommended is the iterative method.A determinação dos parâmetros dinâmicos de estruturas grandes ou complexas pode ser feita utilizando métodos de síntese modal subdividindo a estrutura completa em subestruturas. A aplicação deste método pode ser feita utilizando formulações analítica ou experimental. Em geral, autovalores e autovetores imprecisos podem ser identificados utilizando métodos experimentais de síntese modal devido a um processo deficiente de normalização das bases modais e a condição de baixa ortogonalidade das bases identificadas. Este trabalho contribui para a melhoria do processo de identificação dinâmica de estruturas grandes ou complexas utilizando o método síntese modal experimental. A formulação utiliza como base o método SMFR (Síntese Modal com Flexibilidades Residuais) e um método de identificação das matrizes físicas do sistema usando as FRF (Função de Resposta em Freqüência) experimentais, denominado método ACS. Através dessas matrizes é possível melhorar as condições de ortogonalidade e de normalização das bases modais experimentais. Paralelamente, foram desenvolvidos dois novos métodos (CSME e CSMF) para a escolha automática das bases modais das subestruturas usadas no processo de síntese modal. As metodologias foram validadas através de exemplos de simulação numérica e modelos experimentais. Utilizando o método CSMF foi possível melhorar o processo de escolha modal, automatizando e minimizando a interferência do usuário no método de síntese modal. Através das metodologias analisadas para melhorar o processo de síntese modal experimental, recomenda-se utilizar o método iterativo quando forem utilizados dados experimentais com alto nível de ruído.Doutor em Engenharia Mecânicaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia MecânicaUFUBREngenhariasNormalizaçãoIdentificaçãoSíntese modal experimentalModelagem dinâmicaVibraçãoMecânica dos sólidosDinâmicaVibraçãoNormalizationIdentificationExperimental modal synthesisDynamic modelingCNPQ::ENGENHARIAS::ENGENHARIA MECANICAUma contribuição ao método de síntese modal experimetalA contribution for the experimental modal synthesis methodinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisAraújo, Cleudmar Amaral dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782336A0Rade, Domingos Alveshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781681T7Melo, Gilberto Pechoto dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780787T6Brito, Jorge Neihttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4794745J7Borges, Jose Antonio Ferreirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4784502H9http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4786400P6Junqueira, Manoel Moraesinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILMMJunqueiraTES1PRT.pdf.jpgMMJunqueiraTES1PRT.pdf.jpgGenerated Thumbnailimage/jpeg1326https://repositorio.ufu.br/bitstream/123456789/14782/5/MMJunqueiraTES1PRT.pdf.jpg7b72b70d0da94b3c0c84b133f2d070f0MD55MMJunqueiraTES2PRT.pdf.jpgMMJunqueiraTES2PRT.pdf.jpgGenerated Thumbnailimage/jpeg1551https://repositorio.ufu.br/bitstream/123456789/14782/6/MMJunqueiraTES2PRT.pdf.jpgc38b0b664d8e7b73a46f9e760152fad6MD56ORIGINALMMJunqueiraTES1PRT.pdfapplication/pdf962141https://repositorio.ufu.br/bitstream/123456789/14782/1/MMJunqueiraTES1PRT.pdfcc8ba41c49df3e610e6d8e90df1770ceMD51MMJunqueiraTES2PRT.pdfapplication/pdf2260861https://repositorio.ufu.br/bitstream/123456789/14782/2/MMJunqueiraTES2PRT.pdf7496274dcad81e99723250fb09bd1002MD52TEXTMMJunqueiraTES1PRT.pdf.txtMMJunqueiraTES1PRT.pdf.txtExtracted texttext/plain217503https://repositorio.ufu.br/bitstream/123456789/14782/3/MMJunqueiraTES1PRT.pdf.txtd01800a2a31b0729484498d80e7d6130MD53MMJunqueiraTES2PRT.pdf.txtMMJunqueiraTES2PRT.pdf.txtExtracted texttext/plain126748https://repositorio.ufu.br/bitstream/123456789/14782/4/MMJunqueiraTES2PRT.pdf.txtd62532ad5a0aae8a109484f62387a712MD54123456789/147822016-06-23 04:00:14.931oai:repositorio.ufu.br:123456789/14782Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2024-04-26T14:56:35.350933Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Uma contribuição ao método de síntese modal experimetal |
dc.title.alternative.eng.fl_str_mv |
A contribution for the experimental modal synthesis method |
title |
Uma contribuição ao método de síntese modal experimetal |
spellingShingle |
Uma contribuição ao método de síntese modal experimetal Junqueira, Manoel Moraes Normalização Identificação Síntese modal experimental Modelagem dinâmica Vibração Mecânica dos sólidos Dinâmica Vibração Normalization Identification Experimental modal synthesis Dynamic modeling CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Uma contribuição ao método de síntese modal experimetal |
title_full |
Uma contribuição ao método de síntese modal experimetal |
title_fullStr |
Uma contribuição ao método de síntese modal experimetal |
title_full_unstemmed |
Uma contribuição ao método de síntese modal experimetal |
title_sort |
Uma contribuição ao método de síntese modal experimetal |
author |
Junqueira, Manoel Moraes |
author_facet |
Junqueira, Manoel Moraes |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Araújo, Cleudmar Amaral de |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782336A0 |
dc.contributor.referee1.fl_str_mv |
Rade, Domingos Alves |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781681T7 |
dc.contributor.referee2.fl_str_mv |
Melo, Gilberto Pechoto de |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780787T6 |
dc.contributor.referee3.fl_str_mv |
Brito, Jorge Nei |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4794745J7 |
dc.contributor.referee4.fl_str_mv |
Borges, Jose Antonio Ferreira |
dc.contributor.referee4Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4784502H9 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4786400P6 |
dc.contributor.author.fl_str_mv |
Junqueira, Manoel Moraes |
contributor_str_mv |
Araújo, Cleudmar Amaral de Rade, Domingos Alves Melo, Gilberto Pechoto de Brito, Jorge Nei Borges, Jose Antonio Ferreira |
dc.subject.por.fl_str_mv |
Normalização Identificação Síntese modal experimental Modelagem dinâmica Vibração Mecânica dos sólidos Dinâmica Vibração |
topic |
Normalização Identificação Síntese modal experimental Modelagem dinâmica Vibração Mecânica dos sólidos Dinâmica Vibração Normalization Identification Experimental modal synthesis Dynamic modeling CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
Normalization Identification Experimental modal synthesis Dynamic modeling |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
The determination of the dynamic parameters of great or complex structures can be made using modal synthesis methods subdividing the complete structure in substructures. The employment of this method may be done by using analytical or experimental procedures. Generally speaking, poor eigenvalues and eigenvectors may be identified using experimental modal synthesis methods due to a normalization deficient process of the modal bases and to the low orthogonality condition of the identified bases. The contribution of this current work is about the improvement of the great or complex structures dynamic identification process by using the experimental modal synthesis method. The basis of this research methodology is the SMFR (Modal Synthesis with Residual Flexibilities) method and an identification of the physical matrices of the system by using the experimental FRF (Frequency Response Function), called ACS (Simultaneous Curve Fitting) method. These matrices contribute to the improvement of the orthogonality conditions and normalization of the experimental modal bases. Simultaneously, two new methods (CSME and CSMF) for the automatic choice of the used substructures modal bases in the modal synthesis process have been developed. The validation procedures of these methodologies were developed by using examples of numerical simulation and experimental models. Using CSMF method, it was possible to improve the modal choice process, automatizing and minimizing the interference of the user in the modal synthesis method. In the case of experimental data with high level noise, the recommended is the iterative method. |
publishDate |
2006 |
dc.date.issued.fl_str_mv |
2006-12-08 |
dc.date.available.fl_str_mv |
2007-07-13 2016-06-22T18:39:51Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:39:51Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
JUNQUEIRA, Manoel Moraes. A contribution for the experimental modal synthesis method. 2006. 259 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2006. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/14782 |
identifier_str_mv |
JUNQUEIRA, Manoel Moraes. A contribution for the experimental modal synthesis method. 2006. 259 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2006. |
url |
https://repositorio.ufu.br/handle/123456789/14782 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/14782/5/MMJunqueiraTES1PRT.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14782/6/MMJunqueiraTES2PRT.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14782/1/MMJunqueiraTES1PRT.pdf https://repositorio.ufu.br/bitstream/123456789/14782/2/MMJunqueiraTES2PRT.pdf https://repositorio.ufu.br/bitstream/123456789/14782/3/MMJunqueiraTES1PRT.pdf.txt https://repositorio.ufu.br/bitstream/123456789/14782/4/MMJunqueiraTES2PRT.pdf.txt |
bitstream.checksum.fl_str_mv |
7b72b70d0da94b3c0c84b133f2d070f0 c38b0b664d8e7b73a46f9e760152fad6 cc8ba41c49df3e610e6d8e90df1770ce 7496274dcad81e99723250fb09bd1002 d01800a2a31b0729484498d80e7d6130 d62532ad5a0aae8a109484f62387a712 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1797425489595334656 |