Aplicação de secagem por microondas no tratamento de cascalho de perfuração
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/15070 https://doi.org/10.14393/ufu.te.2013.82 |
Resumo: | Coated or contaminated cuttings with drilling fluid are a residue of drilling. A more restrictive environmental legislation and the need to reduce the costs of drilling lead to optimization of solid-liquid separation and recycling drilling fluids. Shale shakers, hydrocyclones and centrifuges are examples of equipments used for processing drilling fluids. Nowadays, vertical filter centrifuges are used to adjust the cuttings into environmental laws. In this context, this work brings a study on the. Exploratory tests were carried out on domestic microwave oven and indicated the use of this technology as a promising alternative for cuttings decontamination. In this stage, residual n-paraffin contents lower than 2% were achieved. From these evidences, a microwave oven in bench scale was developed for drying contaminated cuttings. A set of aspects of the process were evaluated in this experimental unit. This drying methodology applied to contaminated cuttings was studied through several experimental tests and through a Central Composite Design of Experiments where the manipulated variables were drilling fluid concentration, mass and specific energy. The response variables were residual water and n-paraffin content, percentage of n-paraffin removed, mass flow and mass of n-paraffin removed per unit of energy. Initial tests showed that temperature does not affect the removal efficiency of the organic phase, but seems to affect the quality of the recovered material in the process. The power has negative influence on the cuttings decontamination and specific energy positively affects this process. From the Central Composite Design proposed, it is evident that microwave cuttings drying is favored by the increased mass and specific energy and harmed by the increase of the initial fluid concentration. The results show that cuttings drying carried out on microwave dryer reach levels of residual n-paraffin content lower than ones currently achieved by vertical filter centrifuge (about 4 %), reaching percentages below 1 %. Furthermore, the recovered fluid is free of solids and may be directly reused. Finally, this work has produced a set of important information to the oil industry and even has direct application in it. |
id |
UFU_a59b6df2cd98b1612a0b7d043344e10c |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/15070 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:41:23Z2013-11-062016-06-22T18:41:23Z2013-08-29PEREIRA, Marina Seixas. Aplicação de secagem por microondas no tratamento de cascalho de perfuração. 2013. 150 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2013. DOI https://doi.org/10.14393/ufu.te.2013.82https://repositorio.ufu.br/handle/123456789/15070https://doi.org/10.14393/ufu.te.2013.82Coated or contaminated cuttings with drilling fluid are a residue of drilling. A more restrictive environmental legislation and the need to reduce the costs of drilling lead to optimization of solid-liquid separation and recycling drilling fluids. Shale shakers, hydrocyclones and centrifuges are examples of equipments used for processing drilling fluids. Nowadays, vertical filter centrifuges are used to adjust the cuttings into environmental laws. In this context, this work brings a study on the. Exploratory tests were carried out on domestic microwave oven and indicated the use of this technology as a promising alternative for cuttings decontamination. In this stage, residual n-paraffin contents lower than 2% were achieved. From these evidences, a microwave oven in bench scale was developed for drying contaminated cuttings. A set of aspects of the process were evaluated in this experimental unit. This drying methodology applied to contaminated cuttings was studied through several experimental tests and through a Central Composite Design of Experiments where the manipulated variables were drilling fluid concentration, mass and specific energy. The response variables were residual water and n-paraffin content, percentage of n-paraffin removed, mass flow and mass of n-paraffin removed per unit of energy. Initial tests showed that temperature does not affect the removal efficiency of the organic phase, but seems to affect the quality of the recovered material in the process. The power has negative influence on the cuttings decontamination and specific energy positively affects this process. From the Central Composite Design proposed, it is evident that microwave cuttings drying is favored by the increased mass and specific energy and harmed by the increase of the initial fluid concentration. The results show that cuttings drying carried out on microwave dryer reach levels of residual n-paraffin content lower than ones currently achieved by vertical filter centrifuge (about 4 %), reaching percentages below 1 %. Furthermore, the recovered fluid is free of solids and may be directly reused. Finally, this work has produced a set of important information to the oil industry and even has direct application in it.Como efluente da atividade de perfuração de poços de petróleo e gás, há a geração de cascalhos contaminados ou revestidos com fluido de perfuração. Uma legislação ambiental mais rigorosa e a necessidade de reduzir os custos de perfuração apontam para a necessidade de otimização da separação e reutilização do fluido de perfuração. Como exemplos de equipamentos utilizados na recuperação do fluido de perfuração, podem ser citados as peneiras vibratórias, os hidrociclones e as centrifugas. Atualmente, centrífugas verticais filtrantes são utilizadas para adequar os cascalhos às leis ambientais de descarte deste resíduo. Neste contexto, o presente trabalho traz um estudo sobre a aplicação de secagem por microondas no tratamento de cascalhos de perfuração. Ensaios exploratórios realizados em microondas doméstico indicaram o uso desta tecnologia como uma alternativa promissora para a descontaminação de cascalho. Nesta etapa, teores inferiores a 2% de n-parafina residual foram alcançados. A partir destes indícios, foi desenvolvido um forno microondas em escala de bancada para a secagem de cascalho contaminado com fluido de perfuração. A avaliação de diferentes aspectos do processo foi conduzida e foi proposto também um Planejamento Composto Central, tendo como variáveis a concentração inicial de fluido, a massa de material alimentada no forno e a energia especifica aplicada. Neste caso, as respostas foram: teor residual de água e n-parafina, percentual de n-parafina removido, capacidade e massa de n-parafina removida por unidade de energia. Os testes iniciais mostraram que a temperatura de controle não afeta a é ciência de remoção da fase orgânica, porém parece afetar a qualidade do material recuperado no processo. A potencia tem influência negativa na descontaminação do cascalho e a energia especifica, por sua vez, afeta positivamente esse processo. A partir do Planejamento Composto Central proposto, foi possível verificar que a secagem de cascalhos por microondas é favorecida pelo aumento da massa e energia especifica e prejudicada pelo aumento da concentração inicial de fluido no material. No geral, os resultados mostram que o cascalho submetido à secagem por microondas alcança teores de n-parafina residual inferiores aos alcançados atualmente com a centrifuga vertical (cerca de 4%), chegando a percentuais abaixo de 1%. Além disso, o fluido é recuperado livre de sólidos e pode ser, então, diretamente reutilizado. Finalmente, o presente trabalho gerou um conjunto de informações de grande importância para a indústria de petróleo e ainda tem aplicação direta na mesma.Doutor em Engenharia Químicaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia QuímicaUFUBREngenhariasFuido de perfuraçãoCascalho de perfuraçãoSecagem por microondasSecagemDrillingFluidDrilled cuttingsMicrowave dryingCNPQ::ENGENHARIAS::ENGENHARIA QUIMICAAplicação de secagem por microondas no tratamento de cascalho de perfuraçãoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisBarrozo, Marcos Antonio de Souzahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787095J7Ataíde, Carlos Henriquehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787952H6Duarte, Claudio Robertohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708473P5Béttega, Rodrigohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4777874P8Martins, André Leibsohnhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4705599D4http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4431265H6Pereira, Marina Seixas81757105info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILAplicacaoSecagemMicroondas.pdf.jpgAplicacaoSecagemMicroondas.pdf.jpgGenerated Thumbnailimage/jpeg1340https://repositorio.ufu.br/bitstream/123456789/15070/3/AplicacaoSecagemMicroondas.pdf.jpgb953096d8a68a38165c2bddf50cd7a8fMD53ORIGINALAplicacaoSecagemMicroondas.pdfapplication/pdf7550565https://repositorio.ufu.br/bitstream/123456789/15070/1/AplicacaoSecagemMicroondas.pdfd9ceafadf33d9e8165aad50a060e7a49MD51TEXTAplicacaoSecagemMicroondas.pdf.txtAplicacaoSecagemMicroondas.pdf.txtExtracted texttext/plain236669https://repositorio.ufu.br/bitstream/123456789/15070/2/AplicacaoSecagemMicroondas.pdf.txt5d04e3281602ded3a0b57b875c23ae4cMD52123456789/150702022-08-10 14:26:54.051oai:repositorio.ufu.br:123456789/15070Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2024-04-26T15:01:42.554202Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
title |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
spellingShingle |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração Pereira, Marina Seixas Fuido de perfuração Cascalho de perfuração Secagem por microondas Secagem Drilling Fluid Drilled cuttings Microwave drying CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
title_full |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
title_fullStr |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
title_full_unstemmed |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
title_sort |
Aplicação de secagem por microondas no tratamento de cascalho de perfuração |
author |
Pereira, Marina Seixas |
author_facet |
Pereira, Marina Seixas |
author_role |
author |
dc.contributor.advisor-co1.fl_str_mv |
Barrozo, Marcos Antonio de Souza |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787095J7 |
dc.contributor.advisor1.fl_str_mv |
Ataíde, Carlos Henrique |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787952H6 |
dc.contributor.referee1.fl_str_mv |
Duarte, Claudio Roberto |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708473P5 |
dc.contributor.referee2.fl_str_mv |
Béttega, Rodrigo |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4777874P8 |
dc.contributor.referee3.fl_str_mv |
Martins, André Leibsohn |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4705599D4 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4431265H6 |
dc.contributor.author.fl_str_mv |
Pereira, Marina Seixas |
contributor_str_mv |
Barrozo, Marcos Antonio de Souza Ataíde, Carlos Henrique Duarte, Claudio Roberto Béttega, Rodrigo Martins, André Leibsohn |
dc.subject.por.fl_str_mv |
Fuido de perfuração Cascalho de perfuração Secagem por microondas Secagem |
topic |
Fuido de perfuração Cascalho de perfuração Secagem por microondas Secagem Drilling Fluid Drilled cuttings Microwave drying CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
dc.subject.eng.fl_str_mv |
Drilling Fluid Drilled cuttings Microwave drying |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
description |
Coated or contaminated cuttings with drilling fluid are a residue of drilling. A more restrictive environmental legislation and the need to reduce the costs of drilling lead to optimization of solid-liquid separation and recycling drilling fluids. Shale shakers, hydrocyclones and centrifuges are examples of equipments used for processing drilling fluids. Nowadays, vertical filter centrifuges are used to adjust the cuttings into environmental laws. In this context, this work brings a study on the. Exploratory tests were carried out on domestic microwave oven and indicated the use of this technology as a promising alternative for cuttings decontamination. In this stage, residual n-paraffin contents lower than 2% were achieved. From these evidences, a microwave oven in bench scale was developed for drying contaminated cuttings. A set of aspects of the process were evaluated in this experimental unit. This drying methodology applied to contaminated cuttings was studied through several experimental tests and through a Central Composite Design of Experiments where the manipulated variables were drilling fluid concentration, mass and specific energy. The response variables were residual water and n-paraffin content, percentage of n-paraffin removed, mass flow and mass of n-paraffin removed per unit of energy. Initial tests showed that temperature does not affect the removal efficiency of the organic phase, but seems to affect the quality of the recovered material in the process. The power has negative influence on the cuttings decontamination and specific energy positively affects this process. From the Central Composite Design proposed, it is evident that microwave cuttings drying is favored by the increased mass and specific energy and harmed by the increase of the initial fluid concentration. The results show that cuttings drying carried out on microwave dryer reach levels of residual n-paraffin content lower than ones currently achieved by vertical filter centrifuge (about 4 %), reaching percentages below 1 %. Furthermore, the recovered fluid is free of solids and may be directly reused. Finally, this work has produced a set of important information to the oil industry and even has direct application in it. |
publishDate |
2013 |
dc.date.available.fl_str_mv |
2013-11-06 2016-06-22T18:41:23Z |
dc.date.issued.fl_str_mv |
2013-08-29 |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:41:23Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
PEREIRA, Marina Seixas. Aplicação de secagem por microondas no tratamento de cascalho de perfuração. 2013. 150 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2013. DOI https://doi.org/10.14393/ufu.te.2013.82 |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/15070 |
dc.identifier.doi.none.fl_str_mv |
https://doi.org/10.14393/ufu.te.2013.82 |
identifier_str_mv |
PEREIRA, Marina Seixas. Aplicação de secagem por microondas no tratamento de cascalho de perfuração. 2013. 150 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2013. DOI https://doi.org/10.14393/ufu.te.2013.82 |
url |
https://repositorio.ufu.br/handle/123456789/15070 https://doi.org/10.14393/ufu.te.2013.82 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Química |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/15070/3/AplicacaoSecagemMicroondas.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/15070/1/AplicacaoSecagemMicroondas.pdf https://repositorio.ufu.br/bitstream/123456789/15070/2/AplicacaoSecagemMicroondas.pdf.txt |
bitstream.checksum.fl_str_mv |
b953096d8a68a38165c2bddf50cd7a8f d9ceafadf33d9e8165aad50a060e7a49 5d04e3281602ded3a0b57b875c23ae4c |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1797425528484921344 |