Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/12138 |
Resumo: | The processes of smelting pig iron and steel produce large amount of slags and other wastes. These slags can be used in agriculture to correct soil acidity and/or as a source of silicon (Si), an element considered beneficial to plants. This study evaluated the effect of siderurgical slag Holcim on the sugar cane crop, compared to the certified slag Agrosilício® by parameters related to yield, industrial quality of the sugar cane and plant resistance to diseases and stem borer. Thus, a field experiment in Guaira Sugar Mill, Guaira-SP was done. The sugarcane variety SP80-3280 was grown in soil with three increasing doses of either Si source (400, 800 or 1600 kg ha-1) and a control treatment without application of any of the sources, in a randomized block design as a 2x3+1 factorial, resulting in seven treatments with four replications. Evaluations of plant tillers were done at 30, 60 and 90 days after planting and those of stem length were done 120 days after planting and at harvest. Analysis of leaf Si was done in samples collected 180 and 240 days after planting. Disease severity and the intensity of stem borer (Diatraea saccharalis) damage were done at harvest (after one year). It was observed that in the soil layer of 00-15 cm, Si concentration increased until the dose of 800 kg ha-1 of Holcin slag, while no effect was observed for either source in the other soil layers analyzed. The same effect was observed for leaf Si concentration, which remained unchanged with the application of either Si source to the soil. In contrast, the resistance of plants to diseases and to the stem borer increased when either source was applied up the dose of 800 kg ha-1 slag. The same dose effect was observed for yield. Although biometric parameters such as purity and fiber content of the juice were not affected by the silicate levels, POL and Brix of the juice were favorably affected by greater silicate doses, and at 1600 kg ha-1 Source 1 was better than Source 2. The use of slag dosed did not affect ATR (Total recoverable sugar); however, Source 1 was better than Source 2. The observed results show that similarly to Agrosilício® (Source 2), Holcim slag (Source 1) has high potential to be used in the cultivation of sugarcane, performing, for some variables, even better than the already certified Si source. |
id |
UFU_e5ea72183fc3ca31004e4c0daa078b6c |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/12138 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:30:56Z2011-05-232016-06-22T18:30:56Z2010-11-03ARAÚJO, Leonardo Silva. Steel mill slags and their effects on yield, industrial quality and tolerance of sugar cane to diseases and stem borer. 2010. 71 f. Dissertação (Mestrado em Ciências Agrárias) - Universidade Federal de Uberlândia, Uberlândia, 2010.https://repositorio.ufu.br/handle/123456789/12138The processes of smelting pig iron and steel produce large amount of slags and other wastes. These slags can be used in agriculture to correct soil acidity and/or as a source of silicon (Si), an element considered beneficial to plants. This study evaluated the effect of siderurgical slag Holcim on the sugar cane crop, compared to the certified slag Agrosilício® by parameters related to yield, industrial quality of the sugar cane and plant resistance to diseases and stem borer. Thus, a field experiment in Guaira Sugar Mill, Guaira-SP was done. The sugarcane variety SP80-3280 was grown in soil with three increasing doses of either Si source (400, 800 or 1600 kg ha-1) and a control treatment without application of any of the sources, in a randomized block design as a 2x3+1 factorial, resulting in seven treatments with four replications. Evaluations of plant tillers were done at 30, 60 and 90 days after planting and those of stem length were done 120 days after planting and at harvest. Analysis of leaf Si was done in samples collected 180 and 240 days after planting. Disease severity and the intensity of stem borer (Diatraea saccharalis) damage were done at harvest (after one year). It was observed that in the soil layer of 00-15 cm, Si concentration increased until the dose of 800 kg ha-1 of Holcin slag, while no effect was observed for either source in the other soil layers analyzed. The same effect was observed for leaf Si concentration, which remained unchanged with the application of either Si source to the soil. In contrast, the resistance of plants to diseases and to the stem borer increased when either source was applied up the dose of 800 kg ha-1 slag. The same dose effect was observed for yield. Although biometric parameters such as purity and fiber content of the juice were not affected by the silicate levels, POL and Brix of the juice were favorably affected by greater silicate doses, and at 1600 kg ha-1 Source 1 was better than Source 2. The use of slag dosed did not affect ATR (Total recoverable sugar); however, Source 1 was better than Source 2. The observed results show that similarly to Agrosilício® (Source 2), Holcim slag (Source 1) has high potential to be used in the cultivation of sugarcane, performing, for some variables, even better than the already certified Si source.Nos processos de fundição de ferro-gusa e aço, têm-se como resultado uma grande quantidade de escórias e outros resíduos. Estas escórias podem ser empregadas na agricultura como corretivo de acidez do solo e/ou fonte de silício (Si), elemento este considerado benéfico para as plantas. Este trabalho teve como objetivo testar o efeito da escória siderúrgica, Holcim, na cultura da cana-de-açúcar em comparação à escória certificada, Agrosilício®, em parâmetros relacionados à produtividade, qualidade industrial da cana-de-açúcar e resistência das plantas às doenças e à broca-do-colmo. Para isso, instalou-se um experimento de campo na Usina Açucareira Guaíra, em Guaíra-SP, com a cultura da cana-de-açúcar, variedade SP80-3280, cultivada em solo que recebeu três doses crescentes de ambas as fontes de Si (400, 800 e 1600 kg ha-1) e um tratamento testemunha, sem aplicação de nenhuma das fontes, montados em delineamento de blocos casualizados, em esquema fatorial 2x3+1, o que resulta em 7 tratamentos com 4 repetições. Aos 30, 60 e 90 dias após o plantio, realizou-se avaliações do perfilhamento das plantas e, aos 120 e na ocasião da coleta foram realizadas avaliações do comprimento dos colmos. Para a análise de Si foliar, foram realizadas coletas aos 180 e aos 240 dias após o plantio dos toletes de cana-de-açúcar. Na colheita (após um ano) foi realizada também avaliação da severidade das doenças que incidiram e a intensidade dos danos causados pela broca do colmo (Diatraea saccharalis). Observou-se que, na camada de 00-15 cm de solo, a concentração de Si aumentou até a dose de 800 kg ha-1 da escória Holcim. Já para a as outras camadas do perfil de solo, ambas as fontes não influenciaram na concentração de Si. O mesmo efeito foi observado para os teores foliares de Si, que permaneceram inalterados com a aplicação de ambas as fontes de Si no solo. Já a resistência das plantas, às doenças e à broca do colmo, foi aumentada quando se aplicou ambas as fontes até a dose de 800 kg ha-1 de silicato. Esse mesmo efeito de dose foi observado para a produtividade. Já os parâmetros biométricos, como pureza e teor de fibra do caldo, não foram influenciados pelas doses de silicato, mas para o POL e Brix do caldo, observou-se que o aumento das doses de silicato foi favorável e na dose de 1600 kg ha-1 a Fonte 1 foi superior a Fonte 2. A aplicação das doses de escória não influenciou no ATR (Açúcar total recuperável) e a Fonte 1 se mostrou superior a Fonte 2. Os resultados observados demonstram que, assim como a Fonte 2, a escória Holcim (Fonte 1) apresenta alto potencial para ser utilizada na cultura da cana-de-açúcar, demonstrando, para algumas variáveis, um desempenho até melhor que a fonte de Si já certificada.Mestre em Agronomiaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em AgronomiaUFUBRCiências AgráriasSilicatoResíduo industrialParâmetros biométricosCana-de-açúcar - AdubaçãoCana-de-açúcar - Doenças e pragasSilicatosSilicateIndustrial wasteBiometric parametersCNPQ::CIENCIAS AGRARIAS::AGRONOMIAEscórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmoSteel mill slags and their effects on yield, industrial quality and tolerance of sugar cane to diseases and stem borerinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisKorndorfer, Gaspar Henriquehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721188P3Coelho, Lísiashttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4788535A3Silva, Adriane de Andradehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4759915D8Oliveira, Lilian Aparecida dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4762334U8http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4745220Z1Araújo, Leonardo Silvainfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILDiss Leonardo.pdf.jpgDiss Leonardo.pdf.jpgGenerated Thumbnailimage/jpeg1214https://repositorio.ufu.br/bitstream/123456789/12138/3/Diss%20Leonardo.pdf.jpg7ee4d3b8fa898783f73ae743b1fcef26MD53ORIGINALDiss Leonardo.pdfapplication/pdf1551285https://repositorio.ufu.br/bitstream/123456789/12138/1/Diss%20Leonardo.pdfd7b49c440bd906b4617f1a44e715ce1dMD51TEXTDiss Leonardo.pdf.txtDiss Leonardo.pdf.txtExtracted texttext/plain128715https://repositorio.ufu.br/bitstream/123456789/12138/2/Diss%20Leonardo.pdf.txtbd14f66a42086bf4f252f367e3fb37feMD52123456789/121382017-06-20 14:42:12.91oai:repositorio.ufu.br:123456789/12138Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2024-04-26T15:00:18.536616Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
dc.title.alternative.eng.fl_str_mv |
Steel mill slags and their effects on yield, industrial quality and tolerance of sugar cane to diseases and stem borer |
title |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
spellingShingle |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo Araújo, Leonardo Silva Silicato Resíduo industrial Parâmetros biométricos Cana-de-açúcar - Adubação Cana-de-açúcar - Doenças e pragas Silicatos Silicate Industrial waste Biometric parameters CNPQ::CIENCIAS AGRARIAS::AGRONOMIA |
title_short |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
title_full |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
title_fullStr |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
title_full_unstemmed |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
title_sort |
Escórias siderúrgicas e seus efeitos sobre a produtividade, qualidade industrial e resistência da cana-de-açúcar a doenças e à broca do colmo |
author |
Araújo, Leonardo Silva |
author_facet |
Araújo, Leonardo Silva |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Korndorfer, Gaspar Henrique |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721188P3 |
dc.contributor.referee1.fl_str_mv |
Coelho, Lísias |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4788535A3 |
dc.contributor.referee2.fl_str_mv |
Silva, Adriane de Andrade |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4759915D8 |
dc.contributor.referee3.fl_str_mv |
Oliveira, Lilian Aparecida de |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4762334U8 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4745220Z1 |
dc.contributor.author.fl_str_mv |
Araújo, Leonardo Silva |
contributor_str_mv |
Korndorfer, Gaspar Henrique Coelho, Lísias Silva, Adriane de Andrade Oliveira, Lilian Aparecida de |
dc.subject.por.fl_str_mv |
Silicato Resíduo industrial Parâmetros biométricos Cana-de-açúcar - Adubação Cana-de-açúcar - Doenças e pragas Silicatos |
topic |
Silicato Resíduo industrial Parâmetros biométricos Cana-de-açúcar - Adubação Cana-de-açúcar - Doenças e pragas Silicatos Silicate Industrial waste Biometric parameters CNPQ::CIENCIAS AGRARIAS::AGRONOMIA |
dc.subject.eng.fl_str_mv |
Silicate Industrial waste Biometric parameters |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS AGRARIAS::AGRONOMIA |
description |
The processes of smelting pig iron and steel produce large amount of slags and other wastes. These slags can be used in agriculture to correct soil acidity and/or as a source of silicon (Si), an element considered beneficial to plants. This study evaluated the effect of siderurgical slag Holcim on the sugar cane crop, compared to the certified slag Agrosilício® by parameters related to yield, industrial quality of the sugar cane and plant resistance to diseases and stem borer. Thus, a field experiment in Guaira Sugar Mill, Guaira-SP was done. The sugarcane variety SP80-3280 was grown in soil with three increasing doses of either Si source (400, 800 or 1600 kg ha-1) and a control treatment without application of any of the sources, in a randomized block design as a 2x3+1 factorial, resulting in seven treatments with four replications. Evaluations of plant tillers were done at 30, 60 and 90 days after planting and those of stem length were done 120 days after planting and at harvest. Analysis of leaf Si was done in samples collected 180 and 240 days after planting. Disease severity and the intensity of stem borer (Diatraea saccharalis) damage were done at harvest (after one year). It was observed that in the soil layer of 00-15 cm, Si concentration increased until the dose of 800 kg ha-1 of Holcin slag, while no effect was observed for either source in the other soil layers analyzed. The same effect was observed for leaf Si concentration, which remained unchanged with the application of either Si source to the soil. In contrast, the resistance of plants to diseases and to the stem borer increased when either source was applied up the dose of 800 kg ha-1 slag. The same dose effect was observed for yield. Although biometric parameters such as purity and fiber content of the juice were not affected by the silicate levels, POL and Brix of the juice were favorably affected by greater silicate doses, and at 1600 kg ha-1 Source 1 was better than Source 2. The use of slag dosed did not affect ATR (Total recoverable sugar); however, Source 1 was better than Source 2. The observed results show that similarly to Agrosilício® (Source 2), Holcim slag (Source 1) has high potential to be used in the cultivation of sugarcane, performing, for some variables, even better than the already certified Si source. |
publishDate |
2010 |
dc.date.issued.fl_str_mv |
2010-11-03 |
dc.date.available.fl_str_mv |
2011-05-23 2016-06-22T18:30:56Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:30:56Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
ARAÚJO, Leonardo Silva. Steel mill slags and their effects on yield, industrial quality and tolerance of sugar cane to diseases and stem borer. 2010. 71 f. Dissertação (Mestrado em Ciências Agrárias) - Universidade Federal de Uberlândia, Uberlândia, 2010. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/12138 |
identifier_str_mv |
ARAÚJO, Leonardo Silva. Steel mill slags and their effects on yield, industrial quality and tolerance of sugar cane to diseases and stem borer. 2010. 71 f. Dissertação (Mestrado em Ciências Agrárias) - Universidade Federal de Uberlândia, Uberlândia, 2010. |
url |
https://repositorio.ufu.br/handle/123456789/12138 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Agronomia |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Ciências Agrárias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/12138/3/Diss%20Leonardo.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/12138/1/Diss%20Leonardo.pdf https://repositorio.ufu.br/bitstream/123456789/12138/2/Diss%20Leonardo.pdf.txt |
bitstream.checksum.fl_str_mv |
7ee4d3b8fa898783f73ae743b1fcef26 d7b49c440bd906b4617f1a44e715ce1d bd14f66a42086bf4f252f367e3fb37fe |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1797425518477312000 |