Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars
Autor(a) principal: | |
---|---|
Data de Publicação: | 2023 |
Outros Autores: | , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/42834 |
Resumo: | The aim of this study was to analyze the intrapulpal temperature variation during the operative and restorative phase in human molars. This study was approved by the Research Ethics Committee, registration CAAE 43677521.6.0000.5237 and 24 samples were made from human molars divided into 2 groups, group 1 (n = 12) restored with Bulk Fill composite resin in a single increment and group 2 (n = 12) restored with conventional composite resin in two increments. The temperature was monitored and recorded with a Lutron Tm-902C digital thermostat device during preparation, adhesive system application and restoration. The mean temperature variation in ºC for cavity preparation was -2.07 ± 0.89, application of the adhesive system was 1.12 ± 0.65, restoration with Bulk Fill resin was 2.73 ± 0.72 and restoration with conventional resin was 1.94 ± 0.35. Thus, in the operative phase there was a decrease in temperature in both groups and in the restorative phase the Bulk Fill resin presented a higher temperature compared to conventional resin. |
id |
UNIFEI_7c6221d3d1122366c184c357b89e535a |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/42834 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molarsAnálisis de la variación de la temperatura intrapulpar durante la fase operatoria y restauradora en molares humanosAnálise da variação de temperatura intrapulpar durante a fase operatória e restauradora em molares humanosComposite ResinsPolymerizationTemperature.Resinas CompostasPolimerizaçãoTemperatura.Resinas CompuestasPolimerizaciónTemperatura.The aim of this study was to analyze the intrapulpal temperature variation during the operative and restorative phase in human molars. This study was approved by the Research Ethics Committee, registration CAAE 43677521.6.0000.5237 and 24 samples were made from human molars divided into 2 groups, group 1 (n = 12) restored with Bulk Fill composite resin in a single increment and group 2 (n = 12) restored with conventional composite resin in two increments. The temperature was monitored and recorded with a Lutron Tm-902C digital thermostat device during preparation, adhesive system application and restoration. The mean temperature variation in ºC for cavity preparation was -2.07 ± 0.89, application of the adhesive system was 1.12 ± 0.65, restoration with Bulk Fill resin was 2.73 ± 0.72 and restoration with conventional resin was 1.94 ± 0.35. Thus, in the operative phase there was a decrease in temperature in both groups and in the restorative phase the Bulk Fill resin presented a higher temperature compared to conventional resin.En este estudio se analizó la variación de la temperatura intrapulpar durante la fase operatoria y restauradora en molares humanos. Este estudio fue aprobado por el Comité de Ética en Investigación, registro CAAE 43677521.6.0000.5237. Se realizaron 24 muestras de molares humanos divididos en 2 grupos, grupo 1 (n = 12) restaurados con resina Bulk Fill en un solo incremento y grupo 2 (n = 12) restaurados con resina convencional en dos incrementos. La temperatura fue monitoreada y registrada con un termostato digital Lutron Tm-902C durante la preparación, aplicación del sistema adhesivo y restauración. La variación de temperatura promedio en oC para la preparación cavitaria fue -2,07 ± 0,89, aplicación del sistema adhesivo 1,12 ± 0,65, restauración con resina Bulk Fill fue 2,73 ± 0,72 y restauración con resina convencional presentando 1,94 ± 0,35. En este estudio se concluyó que en la fase operatoria hubo disminución de la temperatura en ambos grupos y en la fase restauradora la resina Bulk Fill presentó una temperatura superior a la resina convencional.Neste estudo, foi analisado a variação de temperatura intrapulpar durante a fase operatória e restauradora em molares humanos. Este estudo foi aprovado pelo Comitê de Ética em Pesquisa, registro CAAE 43677521.6.0000.5237. Foram confeccionadas 24 amostras a partir de molares humanos divididos em 2 grupos, o grupo 1 (n = 12) restaurados com resina Bulk Fill em incremento único e o grupo 2 (n = 12) restaurados com resina convencional em dois incrementos. A temperatura foi monitorada e registrada com aparelho termostato digital Lutron Tm-902C durante o preparo, aplicação do sistema adesivo e restauração. A variação média de temperatura em oC para o preparo cavitário foi de -2,07 ± 0,89, aplicação do sistema adesivo de 1,12 ± 0,65, restauração com resina Bulk Fill foi 2,73 ± 0,72 e restauração com resina convencional apresentando 1,94 ± 0,35. Neste estudo, concluiu-se que na fase operatória ocorreu uma diminuição da temperatura em ambos os grupos e na fase restauradora a resina Bulk Fill apresentou maior temperatura comparada à resina convencional.Research, Society and Development2023-08-12info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/4283410.33448/rsd-v12i8.42834Research, Society and Development; Vol. 12 No. 8; e3912842834Research, Society and Development; Vol. 12 Núm. 8; e3912842834Research, Society and Development; v. 12 n. 8; e39128428342525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/42834/34563Copyright (c) 2023 Ítalo Cardoso de Carvalho; Flávia Guimarães de Oliveira; Ana Paula de Almeida Gomes ; Camila Gobbi de Carvalho Barbosa ; Luis Felipe Abbado de Souza ; Tereza Cristina Favieri de Melo-Silva; Cláudio Luis de Melo-Silvahttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessCarvalho, Ítalo Cardoso de Oliveira, Flávia Guimarães de Gomes , Ana Paula de Almeida Barbosa , Camila Gobbi de Carvalho Souza , Luis Felipe Abbado de Melo-Silva, Tereza Cristina Favieri de Melo-Silva, Cláudio Luis de 2023-09-03T18:32:41Zoai:ojs.pkp.sfu.ca:article/42834Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2023-09-03T18:32:41Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars Análisis de la variación de la temperatura intrapulpar durante la fase operatoria y restauradora en molares humanos Análise da variação de temperatura intrapulpar durante a fase operatória e restauradora em molares humanos |
title |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars |
spellingShingle |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars Carvalho, Ítalo Cardoso de Composite Resins Polymerization Temperature. Resinas Compostas Polimerização Temperatura. Resinas Compuestas Polimerización Temperatura. |
title_short |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars |
title_full |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars |
title_fullStr |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars |
title_full_unstemmed |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars |
title_sort |
Analysis of intrapulpary temperature variation during the operative and restorative phase in human molars |
author |
Carvalho, Ítalo Cardoso de |
author_facet |
Carvalho, Ítalo Cardoso de Oliveira, Flávia Guimarães de Gomes , Ana Paula de Almeida Barbosa , Camila Gobbi de Carvalho Souza , Luis Felipe Abbado de Melo-Silva, Tereza Cristina Favieri de Melo-Silva, Cláudio Luis de |
author_role |
author |
author2 |
Oliveira, Flávia Guimarães de Gomes , Ana Paula de Almeida Barbosa , Camila Gobbi de Carvalho Souza , Luis Felipe Abbado de Melo-Silva, Tereza Cristina Favieri de Melo-Silva, Cláudio Luis de |
author2_role |
author author author author author author |
dc.contributor.author.fl_str_mv |
Carvalho, Ítalo Cardoso de Oliveira, Flávia Guimarães de Gomes , Ana Paula de Almeida Barbosa , Camila Gobbi de Carvalho Souza , Luis Felipe Abbado de Melo-Silva, Tereza Cristina Favieri de Melo-Silva, Cláudio Luis de |
dc.subject.por.fl_str_mv |
Composite Resins Polymerization Temperature. Resinas Compostas Polimerização Temperatura. Resinas Compuestas Polimerización Temperatura. |
topic |
Composite Resins Polymerization Temperature. Resinas Compostas Polimerização Temperatura. Resinas Compuestas Polimerización Temperatura. |
description |
The aim of this study was to analyze the intrapulpal temperature variation during the operative and restorative phase in human molars. This study was approved by the Research Ethics Committee, registration CAAE 43677521.6.0000.5237 and 24 samples were made from human molars divided into 2 groups, group 1 (n = 12) restored with Bulk Fill composite resin in a single increment and group 2 (n = 12) restored with conventional composite resin in two increments. The temperature was monitored and recorded with a Lutron Tm-902C digital thermostat device during preparation, adhesive system application and restoration. The mean temperature variation in ºC for cavity preparation was -2.07 ± 0.89, application of the adhesive system was 1.12 ± 0.65, restoration with Bulk Fill resin was 2.73 ± 0.72 and restoration with conventional resin was 1.94 ± 0.35. Thus, in the operative phase there was a decrease in temperature in both groups and in the restorative phase the Bulk Fill resin presented a higher temperature compared to conventional resin. |
publishDate |
2023 |
dc.date.none.fl_str_mv |
2023-08-12 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/42834 10.33448/rsd-v12i8.42834 |
url |
https://rsdjournal.org/index.php/rsd/article/view/42834 |
identifier_str_mv |
10.33448/rsd-v12i8.42834 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/42834/34563 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 12 No. 8; e3912842834 Research, Society and Development; Vol. 12 Núm. 8; e3912842834 Research, Society and Development; v. 12 n. 8; e3912842834 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052629192278016 |