Applicability of technological development in oral rehabilitation: case report
Autor(a) principal: | |
---|---|
Data de Publicação: | 2021 |
Outros Autores: | , , , , , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/12158 |
Resumo: | Rehabilitation dentistry is undergoing a major evolution in all areas of knowledge, whether through scientific research, development of surgical techniques and development of materials. With the emergence of new technologies, more resources are being added to the daily clinic, since materials and techniques help from diagnosis to the manufacture of prostheses on implants. The objective of this clinical case report is to demonstrate the importance of associating several areas of knowledge in implant-supported rehabilitation, valuing the benefits of using cone beam computed tomography, the CAD / CAM system, intraoral scanners and adhesive techniques in rehabilitation. A 54-year-old patient sought treatment at Fundecto-USP (Fundação Faculdade de Odontologia associated with FOUSP) with a complaint of dental absence in the region of elements 14 and 15, in addition to complaints regarding aesthetics in the anterior region. The diagnosis was made through assembly in a semi-adjustable articulator, photographs and diagnostic waxing. Despite the absence of two elements, rehabilitation with implantation of only element 15 and an increase in elements 16 and 13 was planned. Cone beam computed tomography allowed to identify the absence of sufficient bone height for implant installation in the region of 15, so it was planned installation of the implant with simultaneous lifting of the maxillary sinus membrane. Through intraoral scanning, CAD / CAM technology and clinical information, the virtual waxing project for future crowns was carried out. After approval, the models were printed, reamed the wax crowns, tasted the wax crowns and ceramic reamed crowns. Based on the experience, it seems reasonable to conclude that technological developments have made complex dental rehabilitation faster, more effective and predictable. |
id |
UNIFEI_d4788849cad791451868a561783d7efe |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/12158 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Applicability of technological development in oral rehabilitation: case reportAplicabilidad del desarrollo tecnológico en rehabilitación oral: relato de casoAplicabilidade do desenvolvimento tecnológico nas reabilitações orais: relato de casoCone-Beam Computed TomographyComputer-Aided DesignMouth RehabilitationDental ImplantsThree-dimensional printing.Tomografía Computarizada de Haz CónicoDiseño Asistido por ComputadoraRehabilitación BucalImplantes DentalesImpresión tridimensional.Tomografia Computadorizada de Feixe CônicoCAD-CAMReabilitação BucalImplantes DentáriosImpressão tridimensional.Rehabilitation dentistry is undergoing a major evolution in all areas of knowledge, whether through scientific research, development of surgical techniques and development of materials. With the emergence of new technologies, more resources are being added to the daily clinic, since materials and techniques help from diagnosis to the manufacture of prostheses on implants. The objective of this clinical case report is to demonstrate the importance of associating several areas of knowledge in implant-supported rehabilitation, valuing the benefits of using cone beam computed tomography, the CAD / CAM system, intraoral scanners and adhesive techniques in rehabilitation. A 54-year-old patient sought treatment at Fundecto-USP (Fundação Faculdade de Odontologia associated with FOUSP) with a complaint of dental absence in the region of elements 14 and 15, in addition to complaints regarding aesthetics in the anterior region. The diagnosis was made through assembly in a semi-adjustable articulator, photographs and diagnostic waxing. Despite the absence of two elements, rehabilitation with implantation of only element 15 and an increase in elements 16 and 13 was planned. Cone beam computed tomography allowed to identify the absence of sufficient bone height for implant installation in the region of 15, so it was planned installation of the implant with simultaneous lifting of the maxillary sinus membrane. Through intraoral scanning, CAD / CAM technology and clinical information, the virtual waxing project for future crowns was carried out. After approval, the models were printed, reamed the wax crowns, tasted the wax crowns and ceramic reamed crowns. Based on the experience, it seems reasonable to conclude that technological developments have made complex dental rehabilitation faster, more effective and predictable.La odontología rehabilitadora está experimentando una importante evolución en todas las áreas del conocimiento, ya sea a través de la investigación científica, el desarrollo de técnicas quirúrgicas y el desarrollo de materiales. Con la irrupción de las nuevas tecnologías se van sumando más recursos a la clínica diaria, ya que los materiales y técnicas ayudan desde el diagnóstico hasta la fabricación de prótesis sobre implantes. El objetivo de este caso clínico es demostrar la importancia de asociar varias áreas de conocimiento en la rehabilitación implantosoportada, valorando los beneficios del uso de la tomografía computarizada de haz cónico, el sistema CAD / CAM, escáneres intraorales y técnicas adhesivas en rehabilitación. Un paciente de 54 años buscó tratamiento en la Fundecto-USP (Fundação Faculdade de Odontologia asociada a FOUSP) con una queja de ausencia dentaria en la región de los elementos 14 y 15, además de quejas relacionadas con la estética en la región anterior. El diagnóstico se realizó mediante montaje en articulador semi-ajustable, fotografías y encerado diagnóstico. A pesar de la ausencia de dos elementos, se planificó la rehabilitación con implantación de solo el elemento 15 y aumento de los elementos 16 y 13. La tomografía computarizada de haz cónico permitió identificar la ausencia de altura ósea suficiente para la instalación del implante en la región de 15, por lo que se planificó instalación del implante con elevación simultánea de la membrana del seno maxilar. Mediante escaneo intraoral, tecnología CAD / CAM e información clínica se llevó a cabo el proyecto de encerado virtual para futuras coronas. Después de la aprobación, los modelos se imprimieron, se escariaron las coronas de cera, se probaron las coronas de cera y las coronas de cerámica escariadas. A partir de la experiencia, parece razonable concluir que los avances tecnológicos han hecho que la rehabilitación dental compleja sea más rápida, eficaz y predecible.A odontologia reabilitadora está passando por uma grande evolução em todas as áreas de conhecimento, sejam pelas pesquisas cientificas, desenvolvimento das técnicas cirúrgicas e desenvolvimento de materiais. Com o surgimento de novas tecnologias, mais recursos vem sendo adregados na clínica diária, já que materiais e técnicas auxiliam desde o diagnóstico até a confecção das próteses sobre implantes. Objetiva-se, neste relato de caso clínico, demonstrar a importância da associação de várias áreas do conhecimento na reabilitação implantossuportada, valorizando os benefícios da utilização das tomografias computadorizadas cone beam, do sistema CAD/CAM, dos scaners intraorais e das técnicas adesivas nas reabilitações. Paciente com 54 anos procurou tratamento na Fundecto-USP (Fundação Faculdade de Odontologia conveniada à FOUSP) com queixa de ausência dentária na região dos elementos 14 e 15, além de queixas referentes à estética na região anterior. Foi realizado o diagnóstico através de montagem em articulador semi-ajustável, fotografias e enceramento diagnóstico. Apesar da ausência de dois elementos, foi planejada a reabilitação com implante apenas do elemento 15 e aumento dos elementos 16 e 13. A tomografia computadorizada cone beam, permitiu identificar ausência de altura óssea suficiente para instalação de implante na região do 15, então foi planejado a instalação do implante com levantamento da membrana do seio maxilar de forma simultânea. Através de escaneamento intraoral, tecnologia CAD/CAM e informações clínicas, foi realizado o projeto do enceramento virtual das futuras coroas. Após aprovação foi realizada a impressão dos modelos, fresagem das coroas em cera, prova das coroas em cera e fresagem em cerâmica das coroas. Com base na experiência vivenciada parece lícito concluir que os desenvolvimentos tecnológicos têm tornado as reabilitações odontológicas complexas mais rápidas, mais efetivas e previsíveis.Research, Society and Development2021-01-31info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/1215810.33448/rsd-v10i1.12158Research, Society and Development; Vol. 10 No. 1; e57010112158Research, Society and Development; Vol. 10 Núm. 1; e57010112158Research, Society and Development; v. 10 n. 1; e570101121582525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/12158/10874Copyright (c) 2021 Horácio D’Aguiar Silva Belo; André Luiz Marinho Falcão Gondim; Flávio Domingues das Neves; Andréia Aparecida Traina; Marta Gonzalez Riesco; Katia Arduini Frata; Luis Ferreira de Almeida Neto; Karolina Pires Marcelino; Ivete Aparecida de Mattias Sartorihttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessBelo, Horácio D’Aguiar Silva Gondim, André Luiz Marinho FalcãoNeves, Flávio Domingues dasTraina, Andréia AparecidaRiesco, Marta GonzalezFrata, Katia ArduiniAlmeida Neto, Luis Ferreira deMarcelino, Karolina PiresSartori, Ivete Aparecida de Mattias 2021-02-20T21:19:23Zoai:ojs.pkp.sfu.ca:article/12158Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:33:48.416209Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Applicability of technological development in oral rehabilitation: case report Aplicabilidad del desarrollo tecnológico en rehabilitación oral: relato de caso Aplicabilidade do desenvolvimento tecnológico nas reabilitações orais: relato de caso |
title |
Applicability of technological development in oral rehabilitation: case report |
spellingShingle |
Applicability of technological development in oral rehabilitation: case report Belo, Horácio D’Aguiar Silva Cone-Beam Computed Tomography Computer-Aided Design Mouth Rehabilitation Dental Implants Three-dimensional printing. Tomografía Computarizada de Haz Cónico Diseño Asistido por Computadora Rehabilitación Bucal Implantes Dentales Impresión tridimensional. Tomografia Computadorizada de Feixe Cônico CAD-CAM Reabilitação Bucal Implantes Dentários Impressão tridimensional. |
title_short |
Applicability of technological development in oral rehabilitation: case report |
title_full |
Applicability of technological development in oral rehabilitation: case report |
title_fullStr |
Applicability of technological development in oral rehabilitation: case report |
title_full_unstemmed |
Applicability of technological development in oral rehabilitation: case report |
title_sort |
Applicability of technological development in oral rehabilitation: case report |
author |
Belo, Horácio D’Aguiar Silva |
author_facet |
Belo, Horácio D’Aguiar Silva Gondim, André Luiz Marinho Falcão Neves, Flávio Domingues das Traina, Andréia Aparecida Riesco, Marta Gonzalez Frata, Katia Arduini Almeida Neto, Luis Ferreira de Marcelino, Karolina Pires Sartori, Ivete Aparecida de Mattias |
author_role |
author |
author2 |
Gondim, André Luiz Marinho Falcão Neves, Flávio Domingues das Traina, Andréia Aparecida Riesco, Marta Gonzalez Frata, Katia Arduini Almeida Neto, Luis Ferreira de Marcelino, Karolina Pires Sartori, Ivete Aparecida de Mattias |
author2_role |
author author author author author author author author |
dc.contributor.author.fl_str_mv |
Belo, Horácio D’Aguiar Silva Gondim, André Luiz Marinho Falcão Neves, Flávio Domingues das Traina, Andréia Aparecida Riesco, Marta Gonzalez Frata, Katia Arduini Almeida Neto, Luis Ferreira de Marcelino, Karolina Pires Sartori, Ivete Aparecida de Mattias |
dc.subject.por.fl_str_mv |
Cone-Beam Computed Tomography Computer-Aided Design Mouth Rehabilitation Dental Implants Three-dimensional printing. Tomografía Computarizada de Haz Cónico Diseño Asistido por Computadora Rehabilitación Bucal Implantes Dentales Impresión tridimensional. Tomografia Computadorizada de Feixe Cônico CAD-CAM Reabilitação Bucal Implantes Dentários Impressão tridimensional. |
topic |
Cone-Beam Computed Tomography Computer-Aided Design Mouth Rehabilitation Dental Implants Three-dimensional printing. Tomografía Computarizada de Haz Cónico Diseño Asistido por Computadora Rehabilitación Bucal Implantes Dentales Impresión tridimensional. Tomografia Computadorizada de Feixe Cônico CAD-CAM Reabilitação Bucal Implantes Dentários Impressão tridimensional. |
description |
Rehabilitation dentistry is undergoing a major evolution in all areas of knowledge, whether through scientific research, development of surgical techniques and development of materials. With the emergence of new technologies, more resources are being added to the daily clinic, since materials and techniques help from diagnosis to the manufacture of prostheses on implants. The objective of this clinical case report is to demonstrate the importance of associating several areas of knowledge in implant-supported rehabilitation, valuing the benefits of using cone beam computed tomography, the CAD / CAM system, intraoral scanners and adhesive techniques in rehabilitation. A 54-year-old patient sought treatment at Fundecto-USP (Fundação Faculdade de Odontologia associated with FOUSP) with a complaint of dental absence in the region of elements 14 and 15, in addition to complaints regarding aesthetics in the anterior region. The diagnosis was made through assembly in a semi-adjustable articulator, photographs and diagnostic waxing. Despite the absence of two elements, rehabilitation with implantation of only element 15 and an increase in elements 16 and 13 was planned. Cone beam computed tomography allowed to identify the absence of sufficient bone height for implant installation in the region of 15, so it was planned installation of the implant with simultaneous lifting of the maxillary sinus membrane. Through intraoral scanning, CAD / CAM technology and clinical information, the virtual waxing project for future crowns was carried out. After approval, the models were printed, reamed the wax crowns, tasted the wax crowns and ceramic reamed crowns. Based on the experience, it seems reasonable to conclude that technological developments have made complex dental rehabilitation faster, more effective and predictable. |
publishDate |
2021 |
dc.date.none.fl_str_mv |
2021-01-31 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/12158 10.33448/rsd-v10i1.12158 |
url |
https://rsdjournal.org/index.php/rsd/article/view/12158 |
identifier_str_mv |
10.33448/rsd-v10i1.12158 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/12158/10874 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 10 No. 1; e57010112158 Research, Society and Development; Vol. 10 Núm. 1; e57010112158 Research, Society and Development; v. 10 n. 1; e57010112158 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052745019031552 |