Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície
Autor(a) principal: | |
---|---|
Data de Publicação: | 2003 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/132095 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/01-12-2015/000200273.pdf |
Resumo: | This study evaluated the tensile bond strength of a resin cement to a ceramic after to three ceramic surface treatments. Five blocks of Procera AIICeram (6 mm X 6 mm X 15 mm) were fabricated. Each ceramic block was sectioned in 3 portions of 6 mm X 6 mm X 5 mm. The fifteen blocks were duplicata in resin composite (W3D Master); the ceramic surface was polished through 600, 800 and 1200 SiC grids, and the blocks were divided in 3 experimental groups: Group 1- Sandblasting with 110 µm Al203; Group 2- Rocatec System: Racatec-Pre, Plus and -Sil; and Group 3 - CoJet System: Sandblasting with 30µm silica particles + ESPE-Sil. The ceramic blocks were cemented to the resin composite blocks with resin cement (Panavia F), according to manufacturer's instructions, under a load of 750g for 10min. The cemented blocks were stored in 37°C distilled water for 7 days and sectioned in two axes, x and y, with a diamond disk under cooling water in order to obtain samples (sp) with a bonding area of 0,6 ± 0,1 mm2 (n=30). Each sp was attached to an adapted device for the microtensile test. This set was attached to a universal testing machine (EMIC DL-1000) and tested at crosshead speed of 1mm.min-1. The data were statisfically analyzed using ANOVA and Tukey's test. The bond strength mean values (MPa) were: Group 1- 12.70; Group 2- 17.06 and Group 3- 18.52. G2 and G3 showed statistically significant higher bond strength values than G1. There was no statistical difference between G2 and G3 (p<0,05) |
id |
UNSP_c78f2bd947e09694ef0fd19137700226 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/132095 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfícieCimentos dentariosCerâmicas odontológicasPrótese dentáriaMateriais dentáriosDental cementsThis study evaluated the tensile bond strength of a resin cement to a ceramic after to three ceramic surface treatments. Five blocks of Procera AIICeram (6 mm X 6 mm X 15 mm) were fabricated. Each ceramic block was sectioned in 3 portions of 6 mm X 6 mm X 5 mm. The fifteen blocks were duplicata in resin composite (W3D Master); the ceramic surface was polished through 600, 800 and 1200 SiC grids, and the blocks were divided in 3 experimental groups: Group 1- Sandblasting with 110 µm Al203; Group 2- Rocatec System: Racatec-Pre, Plus and -Sil; and Group 3 - CoJet System: Sandblasting with 30µm silica particles + ESPE-Sil. The ceramic blocks were cemented to the resin composite blocks with resin cement (Panavia F), according to manufacturer's instructions, under a load of 750g for 10min. The cemented blocks were stored in 37°C distilled water for 7 days and sectioned in two axes, x and y, with a diamond disk under cooling water in order to obtain samples (sp) with a bonding area of 0,6 ± 0,1 mm2 (n=30). Each sp was attached to an adapted device for the microtensile test. This set was attached to a universal testing machine (EMIC DL-1000) and tested at crosshead speed of 1mm.min-1. The data were statisfically analyzed using ANOVA and Tukey's test. The bond strength mean values (MPa) were: Group 1- 12.70; Group 2- 17.06 and Group 3- 18.52. G2 and G3 showed statistically significant higher bond strength values than G1. There was no statistical difference between G2 and G3 (p<0,05)Este estudo avaliou a resistência de união entre um cimento resinoso e uma cerâmica submetida a três tratamentos de superfície. Foram confeccionados cinco blocos cerâmicos (Procera AIICeram), com dimensões de 6mm X 6mm X 15mm. Cada bloco foi seccionado em três porções (6mm X 6mm X 5mm). Os quinze blocos obtidos foram duplicados em resina composta (W3D Master) e a superfície cerâmica foi polida com lixas n° 600, 800 e 1200. Os blocos divididos em três grupos experimentais: Grupo 1 - Jateamento com Al2O3 110µm; Grupo 2 - Sistema Rocatec: Rocatec-Pre + Rocatec-Plus + Rocatec-Sil; Grupo 3 - Sistema CoJet: jateamento com partículas especiais de sílica 30µm + ESPE-SiL Os blocos cerâmicos foram cimentados aos de resina composta com o cimento resinoso Panavia F, conforme as instruções do fabricante, sob carga de 750g por 10min. Os blocos cimentados foram armazenados (água destilada/37°C/7 dias) e seccionados em dois eixos, x e y, com disco diamantado sob refrigeração, obtendo-se corpos-de-prova (n=30) com 0,6 ± 0,1 mm2 de área adesiva. Cada cp foi fixado em um paquímetro adaptado para o teste de microtração e o ensaio realizado (velocidade: 1mm.min-1) em máquina de ensaio universal (EMIC DL-1000). Os dados obtidos foram submetidos à análise de variância e teste de Tukey. Os valores médios de resistência de união (MPa) foram: Grupo 1 - 12,70 ± 2,6; Grupo 2-17,06 ± 3,9; Grupo 3 - 18,52 ± 4,72. G2 e G3 apresentaram resistência de união estatisticamente maior que G1. Não houve diferença estatística significante entre G2 e G3 (p<0,05)Universidade Estadual Paulista (Unesp)Neisser, Maximiliano Piero [UNESP]Universidade Estadual Paulista (Unesp)Soares, Luiz Felipe [UNESP]2015-12-10T14:23:51Z2015-12-10T14:23:51Z2003-05-13info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis90 f. : il.application/pdfSOARES, Luiz Felipe. Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície. 2003. 90 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Odontologia de São José dos Campos, 2003.http://hdl.handle.net/11449/132095000200273http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/01-12-2015/000200273.pdf33004145070P8Alephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2023-11-07T06:08:16Zoai:repositorio.unesp.br:11449/132095Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462023-11-07T06:08:16Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
title |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
spellingShingle |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície Soares, Luiz Felipe [UNESP] Cimentos dentarios Cerâmicas odontológicas Prótese dentária Materiais dentários Dental cements |
title_short |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
title_full |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
title_fullStr |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
title_full_unstemmed |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
title_sort |
Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície |
author |
Soares, Luiz Felipe [UNESP] |
author_facet |
Soares, Luiz Felipe [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Neisser, Maximiliano Piero [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Soares, Luiz Felipe [UNESP] |
dc.subject.por.fl_str_mv |
Cimentos dentarios Cerâmicas odontológicas Prótese dentária Materiais dentários Dental cements |
topic |
Cimentos dentarios Cerâmicas odontológicas Prótese dentária Materiais dentários Dental cements |
description |
This study evaluated the tensile bond strength of a resin cement to a ceramic after to three ceramic surface treatments. Five blocks of Procera AIICeram (6 mm X 6 mm X 15 mm) were fabricated. Each ceramic block was sectioned in 3 portions of 6 mm X 6 mm X 5 mm. The fifteen blocks were duplicata in resin composite (W3D Master); the ceramic surface was polished through 600, 800 and 1200 SiC grids, and the blocks were divided in 3 experimental groups: Group 1- Sandblasting with 110 µm Al203; Group 2- Rocatec System: Racatec-Pre, Plus and -Sil; and Group 3 - CoJet System: Sandblasting with 30µm silica particles + ESPE-Sil. The ceramic blocks were cemented to the resin composite blocks with resin cement (Panavia F), according to manufacturer's instructions, under a load of 750g for 10min. The cemented blocks were stored in 37°C distilled water for 7 days and sectioned in two axes, x and y, with a diamond disk under cooling water in order to obtain samples (sp) with a bonding area of 0,6 ± 0,1 mm2 (n=30). Each sp was attached to an adapted device for the microtensile test. This set was attached to a universal testing machine (EMIC DL-1000) and tested at crosshead speed of 1mm.min-1. The data were statisfically analyzed using ANOVA and Tukey's test. The bond strength mean values (MPa) were: Group 1- 12.70; Group 2- 17.06 and Group 3- 18.52. G2 and G3 showed statistically significant higher bond strength values than G1. There was no statistical difference between G2 and G3 (p<0,05) |
publishDate |
2003 |
dc.date.none.fl_str_mv |
2003-05-13 2015-12-10T14:23:51Z 2015-12-10T14:23:51Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SOARES, Luiz Felipe. Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície. 2003. 90 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Odontologia de São José dos Campos, 2003. http://hdl.handle.net/11449/132095 000200273 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/01-12-2015/000200273.pdf 33004145070P8 |
identifier_str_mv |
SOARES, Luiz Felipe. Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície. 2003. 90 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Odontologia de São José dos Campos, 2003. 000200273 33004145070P8 |
url |
http://hdl.handle.net/11449/132095 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/01-12-2015/000200273.pdf |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
90 f. : il. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1797789632901939200 |