Basalt mine-tailings as raw-materials for Portland clinker

• Autor(a) principal: Andrade,F. R. D
• Data de Publicação: 2010
• Outros Autores: Pecchio,M, Bendoraitis,D. P, Montanheiro,T. J, Kihara,Y
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Cerâmica (São Paulo. Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0366-69132010000100007
• topic: mine-tailings; basalt; Portland clinker

Large volumes of waste materials are produced by crushing of basaltic rocks for aggregate production, which is widely used in regions that lack rocks of granitic or gneissic composition. Two types of waste materials are produced (a) quarry fines, which are in part used as fine aggregates in concrete and (b) vesicular basalt, a porous variety of basalt that is useless as aggregate. This paper presents a procedure to use basaltic mine-tailings as raw-mixtures for Portland cement by adjusting the proportion of the other raw-materials (limestone, clay, iron ore). It is demonstrated that there is no need for additional fluxes to the basalt-bearing raw-mixtures, since the setting of the chemical parameters is enough to guarantee clinker formation. Two series of experimental clinkers were synthesized with raw-mixtures containing residues from a basalt quarry that produces aggregates for concrete. Experimental clinkers were produced from raw-mixtures with similar lime saturation factors, silica and alumina modules, which were set by adjusting the proportions of limestone, clay and iron ore to the varying proportions of basaltic materials added to them. One series of clinkers was made with basalt quarry fines, which are in part used as fine aggregate, but also accumulate as mine-tailings. Other series was made using vesicular (porous) basalt, a variety not resistant enough to be used as aggregate. It is demonstrated that the basaltic composition is fully compatible with clinker production, and no addition of fluxes or other additions is required. Composition of the raw-mixtures was checked by chemical analysis. Quantitative phase analysis of the clinkers was made by optical microscopy point counting, together with qualitative X-ray diffraction. All mixtures produced clinkers with acceptable proportions of major and minor crystalline phases, inside the range of common industrial Portland clinkers.