Structural and optical properties of AgCl-sensitized TiO2 (TiO2 @AgCl) prepared by a reflux technique under alkaline condition

• Autor(a) principal: Mu’izayanti,V. A.
• Data de Publicação: 2018
• Outros Autores: Sutrisno,H.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Cerâmica (São Paulo. Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0366-69132018000200190
• topic: TiO2; anatase; rutile; AgCl; bandgap; alkaline condition

Abstract The AgCl-sensitized TiO2 (TiO2@AgCl) has been prepared from the precursor of TiO2-rutile type which on its surface adsorb chloride anion (Cl-) and various amounts of silver using AgNO3 as starting material: AgNO3/(AgNO3+TiO2) mass ratio of 0.00, 1.14, 3.25, 6.38 and 10.32%. Reflux under alkaline condition was the employed technique. All samples were characterized by X-ray diffraction (XRD) and diffuse reflectance UV-vis spectroscopy. The sample without the addition of AgNO3 was analyzed by scanning electron microscope and surface area analyzer. The morphology of the sample showed a distribution of microspheres of approximately 0.5 to 1.0 µm and the specific surface area was 68 m2/g. XRD patterns indicated that the sample without the addition of AgNO3 contained two types of TiO2: rutile (major) and anatase (minor), whereas the samples with the addition of AgNO3 consisted of one phase of AgCl and two types of TiO2: rutile and anatase. The bandgaps of the samples were in the range of 2.97 to 3.24 eV, which were very close to the bandgap of intrinsic TiO2 powder. The presence of 0.8, 2.6 and 4.4 wt% of AgCl in each sample resulted in an additional bandgap in visible light region of 1.90, 1.94 and 2.26 eV, respectively, whereas the presence of 9.4 wt% of AgCl in the sample resulted in two bandgaps in visible light region of 1.98 and 1.88 eV.