Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial
Autor(a) principal: | |
---|---|
Data de Publicação: | 2021 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/22706 |
Resumo: | This dissertation presents the control system for a DC-Nanogrid based on the DCBus Signalling technique. Converter principle of operation is described and its control loops are designed. Modulation geometric approach is used in order to simplify the mathematical modelling and its inner current loop. In order to maximize the power extracted from the photovoltaic arrangement, a maximum power point tracking algorithm is implemented in a indirect way, regulating the input DC-bus voltage. NIBB converter operates in closed loop, using a faster inner inductor current, using the voltage across the inductor as control variable as well as two outer voltage slower loops, so it would be possible to regulate both input and output voltages (V1 and V2). Both simulation and experimental results corroborate the theoretical analysis about the efficiency improving on the BBNI converter as it can be modulated by modifying a auxiliar voltage, adding a degree of freedom in the PWM modulation. |
id |
UFSM_45b2c92dcb80bc5ee65f408c2904014e |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/22706 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencialGeometric modelling of the non-inverting buck-boost converter as interface for residential DC nanogridModulação geometricaSinalização pela tensão do barramento CCNanorrede CCControle droopConversor buck-boost não-inversorNon-inverting buck-boost converterGeometric modulationDC-bus signallingDroop controlCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAThis dissertation presents the control system for a DC-Nanogrid based on the DCBus Signalling technique. Converter principle of operation is described and its control loops are designed. Modulation geometric approach is used in order to simplify the mathematical modelling and its inner current loop. In order to maximize the power extracted from the photovoltaic arrangement, a maximum power point tracking algorithm is implemented in a indirect way, regulating the input DC-bus voltage. NIBB converter operates in closed loop, using a faster inner inductor current, using the voltage across the inductor as control variable as well as two outer voltage slower loops, so it would be possible to regulate both input and output voltages (V1 and V2). Both simulation and experimental results corroborate the theoretical analysis about the efficiency improving on the BBNI converter as it can be modulated by modifying a auxiliar voltage, adding a degree of freedom in the PWM modulation.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESEsta dissertação apresenta o sistema de controle para uma nanorrede CC baseado na tecnica de sinalização pela tensão do barramento CC. O princípio de operação do Conversor Buck-Boost Não-Inversor (BBNI) é descrito e suas malhas de controle são projetadas. A abordagem geométrica para a modulação PWM é utilizada para simplificar a estrutura de controle e modelagem matemática para a malha interna de corrente, fazendo com que esta seja bidirecional e comum para os dois modos de operação do conversor. Para extrair a maxima potência do módulo fotovoltaico, o rastreamento do ponto de maxima potência (MPPT - Maximum Power Point Tracking) é realizado de maneira indireta, controlando o barramento de entrada do conversor. O Conversor BBNI opera em malha fechada utilizando uma malha rápida de corrente do indutor e usando a tensão sob o indutor como variável de controle e duas malhas externas mais lentas (droop e regulacão da tensão de entrada). Os resultados de simulação e experimentais corroboram as análises teóricas acerca da melhora na eficiência do conversor BBNI visto que este é modulado utilizando uma variável auxiliar, a qual adiciona um grau de liberdade adicional para a modulação PWM.Universidade Federal de Santa MariaBrasilEngenharia ElétricaUFSMPrograma de Pós-Graduação em Engenharia ElétricaCentro de TecnologiaMartins, Mário Lúcio da Silvahttp://lattes.cnpq.br/2730012969211616Lopes, Luiz Antonio CorreaLopes, Luiz Antonio CorreaFont, Carlos Henrique IllaGrigoletto, Felipe BovoliniRibeiro, Gustavo Colpes2021-11-04T13:07:47Z2021-11-04T13:07:47Z2021-06-29info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/22706porAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2021-12-30T18:40:22Zoai:repositorio.ufsm.br:1/22706Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2021-12-30T18:40:22Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial Geometric modelling of the non-inverting buck-boost converter as interface for residential DC nanogrid |
title |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial |
spellingShingle |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial Ribeiro, Gustavo Colpes Modulação geometrica Sinalização pela tensão do barramento CC Nanorrede CC Controle droop Conversor buck-boost não-inversor Non-inverting buck-boost converter Geometric modulation DC-bus signalling Droop control CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial |
title_full |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial |
title_fullStr |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial |
title_full_unstemmed |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial |
title_sort |
Modelagem geométrica do conversor buck-boost não-inversor usado na interface de nanorrede CC residencial |
author |
Ribeiro, Gustavo Colpes |
author_facet |
Ribeiro, Gustavo Colpes |
author_role |
author |
dc.contributor.none.fl_str_mv |
Martins, Mário Lúcio da Silva http://lattes.cnpq.br/2730012969211616 Lopes, Luiz Antonio Correa Lopes, Luiz Antonio Correa Font, Carlos Henrique Illa Grigoletto, Felipe Bovolini |
dc.contributor.author.fl_str_mv |
Ribeiro, Gustavo Colpes |
dc.subject.por.fl_str_mv |
Modulação geometrica Sinalização pela tensão do barramento CC Nanorrede CC Controle droop Conversor buck-boost não-inversor Non-inverting buck-boost converter Geometric modulation DC-bus signalling Droop control CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
topic |
Modulação geometrica Sinalização pela tensão do barramento CC Nanorrede CC Controle droop Conversor buck-boost não-inversor Non-inverting buck-boost converter Geometric modulation DC-bus signalling Droop control CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
This dissertation presents the control system for a DC-Nanogrid based on the DCBus Signalling technique. Converter principle of operation is described and its control loops are designed. Modulation geometric approach is used in order to simplify the mathematical modelling and its inner current loop. In order to maximize the power extracted from the photovoltaic arrangement, a maximum power point tracking algorithm is implemented in a indirect way, regulating the input DC-bus voltage. NIBB converter operates in closed loop, using a faster inner inductor current, using the voltage across the inductor as control variable as well as two outer voltage slower loops, so it would be possible to regulate both input and output voltages (V1 and V2). Both simulation and experimental results corroborate the theoretical analysis about the efficiency improving on the BBNI converter as it can be modulated by modifying a auxiliar voltage, adding a degree of freedom in the PWM modulation. |
publishDate |
2021 |
dc.date.none.fl_str_mv |
2021-11-04T13:07:47Z 2021-11-04T13:07:47Z 2021-06-29 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/22706 |
url |
http://repositorio.ufsm.br/handle/1/22706 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica Centro de Tecnologia |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922111015878656 |