Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão

Detalhes bibliográficos
Autor(a) principal: Dagios, Ravel Feron
Data de Publicação: 2018
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Manancial - Repositório Digital da UFSM
Texto Completo: http://repositorio.ufsm.br/handle/1/13648
Resumo: The seeding process is one of the most important operations involved in the agricultural production system, and the quality of execution is a primordial factor for the success of the production. A common problem observed in this operation is the overlapping area of seeds among rows, because of field geometry, equipment width and adopted direction of seeding. Then, the general objective of the work was to evaluate maize productivity in two zones, with overlapping and without overlapping seeding. Aiming for it, it was sought to determine the area of overlapping seeding of the field, determining the number of plants per parcel, number of heads per parcel, total ear length, total ear diameter, number of ear rows, number of grains by ear, a thousand grain mass, and grain yield determination. The experiment was realized in an agricultural property located in the town of Tupanciretã-RS, in a 52.43 hectares area that has center pivot irrigation system, they used an agricultural tractor, equipped with standard auto pilot, with real-time kinematic (RTK) correction and a precision seeder, equipped with section disconnection in the seed dispenser, composed of 33 seeding lines. The experimental design was a randomized complete block design, in a 3x2 factorial form with four replications, composed of three corn hybrids in two management zones, without overlapping of seeding (SSS) and with overlapping of seeding (SSC). The results indicated that the total area of seeding overlap found in the field was 1.33 hectares, representing 2.54% of the area, where seeding occurred in the SSS treatment we reached in maize yield components total spike, a greater mass of a thousand grains and a larger amount of grains per spike, in contrast, where there was seeding occurred in the CSS treatment, presented a higher number of spikes per hectare. The yield of maize in the seeding areas in the CSS treatment, there was a higher number of spikes per hectare. The yield of maize in the seeding areas in the CSS treatment had a reduction of 27.7 sacks per hectare, representing a reduction of 11.36%, compared to the areas where seeding occurred in the SSS treatment.
id UFSM_46ec1c5fb59b40a3bc6e3e8e204cc109
oai_identifier_str oai:repositorio.ufsm.br:1/13648
network_acronym_str UFSM
network_name_str Manancial - Repositório Digital da UFSM
repository_id_str
spelling Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisãoEvaluation of overposition on corn seeding (Zea mays) using a precision planterAgricultura de precisãoControle de seçãoDensidade de semeaduraEconomia de sementeProdutividadePrecision agricultureSection controlSeeding densitySeed economicsProductivityCNPQ::CIENCIAS AGRARIAS::AGRONOMIAThe seeding process is one of the most important operations involved in the agricultural production system, and the quality of execution is a primordial factor for the success of the production. A common problem observed in this operation is the overlapping area of seeds among rows, because of field geometry, equipment width and adopted direction of seeding. Then, the general objective of the work was to evaluate maize productivity in two zones, with overlapping and without overlapping seeding. Aiming for it, it was sought to determine the area of overlapping seeding of the field, determining the number of plants per parcel, number of heads per parcel, total ear length, total ear diameter, number of ear rows, number of grains by ear, a thousand grain mass, and grain yield determination. The experiment was realized in an agricultural property located in the town of Tupanciretã-RS, in a 52.43 hectares area that has center pivot irrigation system, they used an agricultural tractor, equipped with standard auto pilot, with real-time kinematic (RTK) correction and a precision seeder, equipped with section disconnection in the seed dispenser, composed of 33 seeding lines. The experimental design was a randomized complete block design, in a 3x2 factorial form with four replications, composed of three corn hybrids in two management zones, without overlapping of seeding (SSS) and with overlapping of seeding (SSC). The results indicated that the total area of seeding overlap found in the field was 1.33 hectares, representing 2.54% of the area, where seeding occurred in the SSS treatment we reached in maize yield components total spike, a greater mass of a thousand grains and a larger amount of grains per spike, in contrast, where there was seeding occurred in the CSS treatment, presented a higher number of spikes per hectare. The yield of maize in the seeding areas in the CSS treatment, there was a higher number of spikes per hectare. The yield of maize in the seeding areas in the CSS treatment had a reduction of 27.7 sacks per hectare, representing a reduction of 11.36%, compared to the areas where seeding occurred in the SSS treatment.O processo de semeadura é uma das operações mais importantes envolvidas no sistema de produção agrícola, sendo a sua execução com qualidade um fator primordial para o sucesso da produção. Um problema comum observado nessa operação, é a área de sobreposição de sementes entre passadas, devido a geometria do talhão, largura útil de trabalho do equipamento e direção adotada de semeadura. Assim, o objetivo geral do trabalho foi avaliar a produtividade do milho em duas zonas, com sobreposição e sem sobreposição de semeadura. Visando isso, buscou-se especificadamente determinar a área de sobreposição de semeadura do talhão, determinar o número de plantas por parcela, número de espigas por parcela, comprimento total da espiga, diâmetro total da espiga, número de fileiras da espiga, número de grãos por espigas, massa de mil grãos e determinar a produtividade de grãos. O experimento foi conduzido em uma propriedade agrícola, situada no município de Tupanciretã-RS, em uma área de 52,43 hectares que possui sistema de irrigação do tipo aspersão na qual utilizou-se um trator agrícola, equipado com piloto automático integrado de fábrica, com correção cinemática em tempo real (RTK) e uma semeadora de precisão, equipada com desligamento de seção no dosador de semente, composta por 33 linhas de semeadura. O delineamento experimental utilizado foi blocos ao acaso, sob forma fatorial 3x2 com quatro repetições, composto por três híbridos de milho em duas zonas de manejo, sem sobreposição de semeadura (SSS) e com sobreposição de semeadura (CSS). Os resultados indicaram que, a área total de sobreposição de semeadura encontrada no talhão, foi de 1,33 hectares, representando 2,54% da área, onde ocorreu a semeadura no tratamento SSS, alcançamos nos componentes de rendimento de milho, um maior comprimento total da espiga, uma maior massa de mil grãos e uma quantidade maior de grãos por espigas, em contrapartida, onde ocorreu a semeadura no tratamento CSS, apresentou maior número de espigas por hectare. A produtividade do milho nas zonas a qual houve a semeadura no tratamento CSS teve uma redução de 27,7 sacas por hectare, representando uma redução de 11,36%, comparadas as zonas onde ocorreu a semeadura no tratamento SSS.Universidade Federal de Santa MariaBrasilTecnologia em Agricultura de PrecisãoUFSMPrograma de Pós-Graduação em Agricultura de PrecisãoColégio Politécnico da UFSMSanti, Antônio Luishttp://lattes.cnpq.br/6223011493102530Farias, Marcelo Silveira dehttp://lattes.cnpq.br/6322690081849134Cherubin, Maurício Robertohttp://lattes.cnpq.br/5804627494380130Dagios, Ravel Feron2018-07-03T19:27:35Z2018-07-03T19:27:35Z2018-03-02info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/13648porAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-05-06T14:21:22Zoai:repositorio.ufsm.br:1/13648Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-05-06T14:21:22Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
Evaluation of overposition on corn seeding (Zea mays) using a precision planter
title Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
spellingShingle Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
Dagios, Ravel Feron
Agricultura de precisão
Controle de seção
Densidade de semeadura
Economia de semente
Produtividade
Precision agriculture
Section control
Seeding density
Seed economics
Productivity
CNPQ::CIENCIAS AGRARIAS::AGRONOMIA
title_short Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
title_full Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
title_fullStr Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
title_full_unstemmed Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
title_sort Avaliação da sobreposição na semeadura do milho (Zea mays) utilizando uma semeadora de precisão
author Dagios, Ravel Feron
author_facet Dagios, Ravel Feron
author_role author
dc.contributor.none.fl_str_mv Santi, Antônio Luis
http://lattes.cnpq.br/6223011493102530
Farias, Marcelo Silveira de
http://lattes.cnpq.br/6322690081849134
Cherubin, Maurício Roberto
http://lattes.cnpq.br/5804627494380130
dc.contributor.author.fl_str_mv Dagios, Ravel Feron
dc.subject.por.fl_str_mv Agricultura de precisão
Controle de seção
Densidade de semeadura
Economia de semente
Produtividade
Precision agriculture
Section control
Seeding density
Seed economics
Productivity
CNPQ::CIENCIAS AGRARIAS::AGRONOMIA
topic Agricultura de precisão
Controle de seção
Densidade de semeadura
Economia de semente
Produtividade
Precision agriculture
Section control
Seeding density
Seed economics
Productivity
CNPQ::CIENCIAS AGRARIAS::AGRONOMIA
description The seeding process is one of the most important operations involved in the agricultural production system, and the quality of execution is a primordial factor for the success of the production. A common problem observed in this operation is the overlapping area of seeds among rows, because of field geometry, equipment width and adopted direction of seeding. Then, the general objective of the work was to evaluate maize productivity in two zones, with overlapping and without overlapping seeding. Aiming for it, it was sought to determine the area of overlapping seeding of the field, determining the number of plants per parcel, number of heads per parcel, total ear length, total ear diameter, number of ear rows, number of grains by ear, a thousand grain mass, and grain yield determination. The experiment was realized in an agricultural property located in the town of Tupanciretã-RS, in a 52.43 hectares area that has center pivot irrigation system, they used an agricultural tractor, equipped with standard auto pilot, with real-time kinematic (RTK) correction and a precision seeder, equipped with section disconnection in the seed dispenser, composed of 33 seeding lines. The experimental design was a randomized complete block design, in a 3x2 factorial form with four replications, composed of three corn hybrids in two management zones, without overlapping of seeding (SSS) and with overlapping of seeding (SSC). The results indicated that the total area of seeding overlap found in the field was 1.33 hectares, representing 2.54% of the area, where seeding occurred in the SSS treatment we reached in maize yield components total spike, a greater mass of a thousand grains and a larger amount of grains per spike, in contrast, where there was seeding occurred in the CSS treatment, presented a higher number of spikes per hectare. The yield of maize in the seeding areas in the CSS treatment, there was a higher number of spikes per hectare. The yield of maize in the seeding areas in the CSS treatment had a reduction of 27.7 sacks per hectare, representing a reduction of 11.36%, compared to the areas where seeding occurred in the SSS treatment.
publishDate 2018
dc.date.none.fl_str_mv 2018-07-03T19:27:35Z
2018-07-03T19:27:35Z
2018-03-02
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://repositorio.ufsm.br/handle/1/13648
url http://repositorio.ufsm.br/handle/1/13648
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
Tecnologia em Agricultura de Precisão
UFSM
Programa de Pós-Graduação em Agricultura de Precisão
Colégio Politécnico da UFSM
publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
Tecnologia em Agricultura de Precisão
UFSM
Programa de Pós-Graduação em Agricultura de Precisão
Colégio Politécnico da UFSM
dc.source.none.fl_str_mv reponame:Manancial - Repositório Digital da UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Manancial - Repositório Digital da UFSM
collection Manancial - Repositório Digital da UFSM
repository.name.fl_str_mv Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com
_version_ 1805922053382995968