Desenvolvimento de um sistema de controle automático para simulador de chuvas
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/7610 |
Resumo: | In the 1930‟s, in the United States, Borst and Woodburn developed a rain simulator to conduct studies on the behavior of water runoff. Over time a lot of rain simulators were developed to control and reproduce the characteristics of natural rain. From the 1990‟s, electronic technology started to act more effectively in agricultural machinery and equipment, enabling for better control and process automation. In this scenario, the objective of this dissertation is to present a conception of an automated technical system to control the rain process. The proposed system is able to measure pressure, temperature, water flow in the system and record the data. The system has a microcontroller mounted on the CUSCOPIC kit. Also, the software programming was done in C language. The system was submitted to three experiments: the uniformity of rain distribution with one nozzle, the uniformity of rain distribution with two nozzles and the measurement of kinetic energy at the nozzle. The result of the experiments made it possible to verify that the nozzle, recommended by the manufacturer, was accurate for the number of drops at the same range of the diameter. However, the kinetic energy in both scenarios corresponded to 13.09% and 2.3% of natural rain so, it was not recommended for their use. The use of the concept contributed to the generation of simulated rain with more stability of the pressure and flow of water in the system. Reports generated by the prototype enable recording and tracing the parameters used in each experiment. |
id |
UFSM_e4b5fa7b0c2dbbd71afce8505088f409 |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/7610 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Desenvolvimento de um sistema de controle automático para simulador de chuvasDevelopment of a rain simulator via automatic controlAutomação de processosMicrocontroladoresChuva simuladaProcess automationMicrocontrollersSimulated rainCNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLAIn the 1930‟s, in the United States, Borst and Woodburn developed a rain simulator to conduct studies on the behavior of water runoff. Over time a lot of rain simulators were developed to control and reproduce the characteristics of natural rain. From the 1990‟s, electronic technology started to act more effectively in agricultural machinery and equipment, enabling for better control and process automation. In this scenario, the objective of this dissertation is to present a conception of an automated technical system to control the rain process. The proposed system is able to measure pressure, temperature, water flow in the system and record the data. The system has a microcontroller mounted on the CUSCOPIC kit. Also, the software programming was done in C language. The system was submitted to three experiments: the uniformity of rain distribution with one nozzle, the uniformity of rain distribution with two nozzles and the measurement of kinetic energy at the nozzle. The result of the experiments made it possible to verify that the nozzle, recommended by the manufacturer, was accurate for the number of drops at the same range of the diameter. However, the kinetic energy in both scenarios corresponded to 13.09% and 2.3% of natural rain so, it was not recommended for their use. The use of the concept contributed to the generation of simulated rain with more stability of the pressure and flow of water in the system. Reports generated by the prototype enable recording and tracing the parameters used in each experiment.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorNa década de 1930, nos Estados Unidos, Borst e WoodBurn desenvolveram um simulador de chuva para realizar estudos sobre o comportamento do escoamento superficial da água. Ao longo do tempo foi desenvolvido um grande número de simuladores de chuva para controlar e reproduzir as características da chuva natural. A partir da década de 1990 a eletrônica passou a atuar de forma mais efetiva em máquinas e equipamentos agrícolas, possibilitando melhores condições de controle e automação nos processos. Neste contexto, o objetivo desta dissertação é apresentar a concepção de um sistema técnico automatizado para o controle do processo de geração de chuva. O sistema desenvolvido realiza medições de pressão, temperatura e vazão da água no sistema, registrando os dados na forma de relatório. A concepção utiliza microcontrolador montado no kit de desenvolvimento CUSCOPIC e a programação do software foi realizada em linguagem C. O sistema foi submetido a três experimentos, uniformidade de distribuição da chuva com um bico, uniformidade de distribuição da chuva com dois bicos e medição da energia cinética do bico. O resultado dos experimentos possibilitou verificar que o bico recomendado pelo fabricante apresenta precisão do número de gotas na mesma faixa de diâmetro, porém a energia cinética nos dois cenários experimentados corresponde a 13,09% e 2,3% da chuva natural, não sendo recomendado o seu uso. A utilização da concepção contribuiu para a geração de chuva simulada com maior estabilidade da pressão e da vazão da água no sistema. Os relatórios gerados pelo protótipo possibilitam registrar e rastrear os parâmetros utilizados em cada experimento.Universidade Federal de Santa MariaBREngenharia AgrícolaUFSMPrograma de Pós-Graduação em Engenharia AgrícolaRomano, Leonardo Nabaeshttp://lattes.cnpq.br/1310558353123248Dallmeyer, Arno Udohttp://lattes.cnpq.br/6410822186320216Valdiero, Antonio Carloshttp://lattes.cnpq.br/3894445999140917Santos, César Gabriel dos2016-03-172016-03-172015-03-02info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfSANTOS, César Gabriel dos. Development of a rain simulator via automatic control. 2015. 144 f. Dissertação (Mestrado em Engenharia Agrícola) - Universidade Federal de Santa Maria, Santa Maria, 2015.http://repositorio.ufsm.br/handle/1/7610porinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-03-04T18:43:41Zoai:repositorio.ufsm.br:1/7610Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-03-04T18:43:41Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Desenvolvimento de um sistema de controle automático para simulador de chuvas Development of a rain simulator via automatic control |
title |
Desenvolvimento de um sistema de controle automático para simulador de chuvas |
spellingShingle |
Desenvolvimento de um sistema de controle automático para simulador de chuvas Santos, César Gabriel dos Automação de processos Microcontroladores Chuva simulada Process automation Microcontrollers Simulated rain CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA |
title_short |
Desenvolvimento de um sistema de controle automático para simulador de chuvas |
title_full |
Desenvolvimento de um sistema de controle automático para simulador de chuvas |
title_fullStr |
Desenvolvimento de um sistema de controle automático para simulador de chuvas |
title_full_unstemmed |
Desenvolvimento de um sistema de controle automático para simulador de chuvas |
title_sort |
Desenvolvimento de um sistema de controle automático para simulador de chuvas |
author |
Santos, César Gabriel dos |
author_facet |
Santos, César Gabriel dos |
author_role |
author |
dc.contributor.none.fl_str_mv |
Romano, Leonardo Nabaes http://lattes.cnpq.br/1310558353123248 Dallmeyer, Arno Udo http://lattes.cnpq.br/6410822186320216 Valdiero, Antonio Carlos http://lattes.cnpq.br/3894445999140917 |
dc.contributor.author.fl_str_mv |
Santos, César Gabriel dos |
dc.subject.por.fl_str_mv |
Automação de processos Microcontroladores Chuva simulada Process automation Microcontrollers Simulated rain CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA |
topic |
Automação de processos Microcontroladores Chuva simulada Process automation Microcontrollers Simulated rain CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA |
description |
In the 1930‟s, in the United States, Borst and Woodburn developed a rain simulator to conduct studies on the behavior of water runoff. Over time a lot of rain simulators were developed to control and reproduce the characteristics of natural rain. From the 1990‟s, electronic technology started to act more effectively in agricultural machinery and equipment, enabling for better control and process automation. In this scenario, the objective of this dissertation is to present a conception of an automated technical system to control the rain process. The proposed system is able to measure pressure, temperature, water flow in the system and record the data. The system has a microcontroller mounted on the CUSCOPIC kit. Also, the software programming was done in C language. The system was submitted to three experiments: the uniformity of rain distribution with one nozzle, the uniformity of rain distribution with two nozzles and the measurement of kinetic energy at the nozzle. The result of the experiments made it possible to verify that the nozzle, recommended by the manufacturer, was accurate for the number of drops at the same range of the diameter. However, the kinetic energy in both scenarios corresponded to 13.09% and 2.3% of natural rain so, it was not recommended for their use. The use of the concept contributed to the generation of simulated rain with more stability of the pressure and flow of water in the system. Reports generated by the prototype enable recording and tracing the parameters used in each experiment. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-03-02 2016-03-17 2016-03-17 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SANTOS, César Gabriel dos. Development of a rain simulator via automatic control. 2015. 144 f. Dissertação (Mestrado em Engenharia Agrícola) - Universidade Federal de Santa Maria, Santa Maria, 2015. http://repositorio.ufsm.br/handle/1/7610 |
identifier_str_mv |
SANTOS, César Gabriel dos. Development of a rain simulator via automatic control. 2015. 144 f. Dissertação (Mestrado em Engenharia Agrícola) - Universidade Federal de Santa Maria, Santa Maria, 2015. |
url |
http://repositorio.ufsm.br/handle/1/7610 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia Agrícola UFSM Programa de Pós-Graduação em Engenharia Agrícola |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia Agrícola UFSM Programa de Pós-Graduação em Engenharia Agrícola |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922119720108032 |