Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista
Autor(a) principal: | |
---|---|
Data de Publicação: | 2009 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/8475 |
Resumo: | This Master Thesis presents the study and proposes a digital control system applied to the PFC boost converter operating in mixed conduction mode. The motivation to this subject, a bibliographic review of the existing current control techniques and the objectives of this work are presented in the first chapter. The control system is composed of a current loop, which has the objectives to provide low harmonic content to the input current and high power factor to the converter, and a voltage loop, which has the goal to regulate the output voltage of the converter. Initially, the study of the conduction modes of the PFC boost converter, highlighting their operation conditions, and details of the mixed conduction mode operation are showed. Next, two predictive digital current controllers with feedforward action are approached in details, including the equations deduction, block diagram, operation process, design, simulation results and parametric variation analysis. A comparative analysis between both controllers is also accomplished. The proportional-integral voltage controller is presented following, comprising its structure, design and simulation results. After, issues related to the practical implementation of the converter and control system, as the converter design and the control device programming, are shown. Finally, the experimental results obtained through the implementation of the proposed system, including the waveforms acquired using a prototype constructed in laboratory and the quality indexes as the power factor and the total harmonic distortion, are presented with the purpose to validate and prove the content of this work. |
id |
UFSM_f1cb4f89838eb9797f925cda093b2dfc |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/8475 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mistaStudy, control and implementation of the pfc boost converter operating in mixed conduction modeEletrônica de potênciaConversor boost PFCSistema de controle em MCMPower electronicsPFC boost converterMCM control systemCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAThis Master Thesis presents the study and proposes a digital control system applied to the PFC boost converter operating in mixed conduction mode. The motivation to this subject, a bibliographic review of the existing current control techniques and the objectives of this work are presented in the first chapter. The control system is composed of a current loop, which has the objectives to provide low harmonic content to the input current and high power factor to the converter, and a voltage loop, which has the goal to regulate the output voltage of the converter. Initially, the study of the conduction modes of the PFC boost converter, highlighting their operation conditions, and details of the mixed conduction mode operation are showed. Next, two predictive digital current controllers with feedforward action are approached in details, including the equations deduction, block diagram, operation process, design, simulation results and parametric variation analysis. A comparative analysis between both controllers is also accomplished. The proportional-integral voltage controller is presented following, comprising its structure, design and simulation results. After, issues related to the practical implementation of the converter and control system, as the converter design and the control device programming, are shown. Finally, the experimental results obtained through the implementation of the proposed system, including the waveforms acquired using a prototype constructed in laboratory and the quality indexes as the power factor and the total harmonic distortion, are presented with the purpose to validate and prove the content of this work.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorEsta Dissertação de Mestrado apresenta o estudo e propõe um sistema de controle digital para o conversor boost PFC operando no modo de condução mista. A motivação para este assunto, uma revisão bibliográfica das técnicas de controle de corrente existentes e os objetivos do trabalho são apresentados no capítulo introdutório. O sistema de controle é composto de uma malha de corrente, que tem por objetivo proporcionar baixo conteúdo harmônico para a corrente de entrada e alto fator de potência para o conversor, e uma malha de tensão, que tem por objetivo regular a tensão de saída do conversor. Inicialmente, o estudo dos modos de condução do conversor boost PFC, destacando as suas condições de operação, e detalhes da operação no modo de condução mista são mostrados. Em seguida, dois controladores digitais preditivos de corrente com ação feedforward são abordados em detalhes, incluindo o equacionamento, diagrama de blocos, funcionamento, projeto, resultados de simulação e análise da variação paramétrica. Uma análise comparativa entre ambos também é realizada. O controlador proporcional-integral de tensão é abordado na seqüência, compreendendo sua estrutura, projeto e resultados de simulação. Posteriormente, questões relativas à implementação prática do conversor e do sistema de controle, como o projeto do conversor e a programação do dispositivo de controle, são mostradas. Por fim, os resultados experimentais obtidos com a implementação do sistema proposto, incluindo as formas de onda adquiridas em um protótipo construído em laboratório e os índices de qualidade como o fator de potência e a distorção harmônica total, são apresentados com o intuito de validar e comprovar o conteúdo deste trabalho.Universidade Federal de Santa MariaBREngenharia ElétricaUFSMPrograma de Pós-Graduação em Engenharia ElétricaPinheiro, José Reneshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787136P4Baggio, José Eduardohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4795897Y4Martins, Mário Lúcio da Silvahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4707553D1Schuch, Lucianohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702349T4Roggia, Leandro2017-05-292017-05-292009-11-10info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfROGGIA, Leandro. Study, control and implementation of the pfc boost converter operating in mixed conduction mode. 2009. 144 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2009.http://repositorio.ufsm.br/handle/1/8475porinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2017-07-25T14:45:46Zoai:repositorio.ufsm.br:1/8475Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2017-07-25T14:45:46Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista Study, control and implementation of the pfc boost converter operating in mixed conduction mode |
title |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista |
spellingShingle |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista Roggia, Leandro Eletrônica de potência Conversor boost PFC Sistema de controle em MCM Power electronics PFC boost converter MCM control system CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista |
title_full |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista |
title_fullStr |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista |
title_full_unstemmed |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista |
title_sort |
Estudo, controle e implementação do conversor Boost PFC operando no modo de condução mista |
author |
Roggia, Leandro |
author_facet |
Roggia, Leandro |
author_role |
author |
dc.contributor.none.fl_str_mv |
Pinheiro, José Renes http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787136P4 Baggio, José Eduardo http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4795897Y4 Martins, Mário Lúcio da Silva http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4707553D1 Schuch, Luciano http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702349T4 |
dc.contributor.author.fl_str_mv |
Roggia, Leandro |
dc.subject.por.fl_str_mv |
Eletrônica de potência Conversor boost PFC Sistema de controle em MCM Power electronics PFC boost converter MCM control system CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
topic |
Eletrônica de potência Conversor boost PFC Sistema de controle em MCM Power electronics PFC boost converter MCM control system CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
This Master Thesis presents the study and proposes a digital control system applied to the PFC boost converter operating in mixed conduction mode. The motivation to this subject, a bibliographic review of the existing current control techniques and the objectives of this work are presented in the first chapter. The control system is composed of a current loop, which has the objectives to provide low harmonic content to the input current and high power factor to the converter, and a voltage loop, which has the goal to regulate the output voltage of the converter. Initially, the study of the conduction modes of the PFC boost converter, highlighting their operation conditions, and details of the mixed conduction mode operation are showed. Next, two predictive digital current controllers with feedforward action are approached in details, including the equations deduction, block diagram, operation process, design, simulation results and parametric variation analysis. A comparative analysis between both controllers is also accomplished. The proportional-integral voltage controller is presented following, comprising its structure, design and simulation results. After, issues related to the practical implementation of the converter and control system, as the converter design and the control device programming, are shown. Finally, the experimental results obtained through the implementation of the proposed system, including the waveforms acquired using a prototype constructed in laboratory and the quality indexes as the power factor and the total harmonic distortion, are presented with the purpose to validate and prove the content of this work. |
publishDate |
2009 |
dc.date.none.fl_str_mv |
2009-11-10 2017-05-29 2017-05-29 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
ROGGIA, Leandro. Study, control and implementation of the pfc boost converter operating in mixed conduction mode. 2009. 144 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2009. http://repositorio.ufsm.br/handle/1/8475 |
identifier_str_mv |
ROGGIA, Leandro. Study, control and implementation of the pfc boost converter operating in mixed conduction mode. 2009. 144 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2009. |
url |
http://repositorio.ufsm.br/handle/1/8475 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922118856081408 |