Contact Failure Identification in Multilayered Media via Artificial Neural Networks and Autoencoders

• Autor(a) principal: JARDIM,LUCAS C.S.
• Data de Publicação: 2022
• Outros Autores: KNUPP,DIEGO C., DOMINGOS,ROBERTO P., ABREU,LUIZ ALBERTO S., CORONA,CARLOS C., SILVA NETO,ANTÔNIO JOSÉ
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Anais da Academia Brasileira de Ciências (Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0001-37652022000701701
• topic: Inverse heat conduction problem; artificial neural networks; contact failure identification; applied artificial intelligence; denoising autoencoder

Abstract The estimation of defects positioning occurring in the interface between different materials is performed by using an artificial neural network modeled as an inverse heat conduction problem. Identifying contact failures in the bonding process of different materials is crucial in many engineering applications, ranging from manufacturing, preventive inspection and even failure diagnosis. This can be modeled as an inverse heat conduction problem in multilayered media, where thermography temperature measurements from an exposed surface of the media are available. This work solves this inverse problem with an artificial neural network that receives these experimental data as input and outputs the thermalphysical properties of the adhesive layer, where defects can occur. An autoencoder is used to reduce the dimension of the transient 1D thermography data, where its latent space represents the experimental data in a lower dimension, then these reduced data are used as input to a fully connected multilayer perceptron network. Results indicate that this is a promising approach due to the good accuracy and low computational cost observed. In addition, by including different noise levels within a defined range in the training process, the network can generalize the experimental data input and estimate the positioning of defects with similar quality.