Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Latin American journal of solids and structures (Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252013000100004 |
Resumo: | The subject of the present work is the numerical verification and experimental validation of the FEM model which would enable us to analyse the vibrations of collecting electrodes. The effectiveness of electrostatic precipitators (ESP) depends on many factors. One of these factors is the efficiency of periodic cleaning of the collecting electrodes; thus the dust is removed by inducing vibrations. These vibrations are caused by the axial impact of a hammer on an anvil beam. In the course of the impact, and afterwards, the stresses due to the impact are produced in both the rapper system and in the collecting electrode section. The paper presents a modified finite element method which can be used in simulations and to analyse the vibrations of collecting electrodes. In the verification process the calculation results obtained were compared with those from commercial software (Abaqus). The calculations and measured results were compared for validation. The comparisons were made using peak and RMS (root-mean-squared) values as well as special factors and hit rates. An acceptable compatibility of the results proves that the model can be applied in the analysis of vibrations of electrodes in design practice. |
id |
ABCM-1_aa3e055a9efb1fea958b587d5e261086 |
---|---|
oai_identifier_str |
oai:scielo:S1679-78252013000100004 |
network_acronym_str |
ABCM-1 |
network_name_str |
Latin American journal of solids and structures (Online) |
repository_id_str |
|
spelling |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitatorLaminate Composite PlateFinite ElementHigher Order Shear DeformationLocking PhenomenonAssumed Strain MethodThe subject of the present work is the numerical verification and experimental validation of the FEM model which would enable us to analyse the vibrations of collecting electrodes. The effectiveness of electrostatic precipitators (ESP) depends on many factors. One of these factors is the efficiency of periodic cleaning of the collecting electrodes; thus the dust is removed by inducing vibrations. These vibrations are caused by the axial impact of a hammer on an anvil beam. In the course of the impact, and afterwards, the stresses due to the impact are produced in both the rapper system and in the collecting electrode section. The paper presents a modified finite element method which can be used in simulations and to analyse the vibrations of collecting electrodes. In the verification process the calculation results obtained were compared with those from commercial software (Abaqus). The calculations and measured results were compared for validation. The comparisons were made using peak and RMS (root-mean-squared) values as well as special factors and hit rates. An acceptable compatibility of the results proves that the model can be applied in the analysis of vibrations of electrodes in design practice.Associação Brasileira de Ciências Mecânicas2013-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252013000100004Latin American Journal of Solids and Structures v.10 n.1 2013reponame:Latin American journal of solids and structures (Online)instname:Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)instacron:ABCM10.1590/S1679-78252013000100004info:eu-repo/semantics/openAccessNowak,Andrzejeng2016-08-18T00:00:00Zoai:scielo:S1679-78252013000100004Revistahttp://www.scielo.br/scielo.php?script=sci_serial&pid=1679-7825&lng=pt&nrm=isohttps://old.scielo.br/oai/scielo-oai.phpabcm@abcm.org.br||maralves@usp.br1679-78251679-7817opendoar:2016-08-18T00:00Latin American journal of solids and structures (Online) - Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM)false |
dc.title.none.fl_str_mv |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
title |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
spellingShingle |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator Nowak,Andrzej Laminate Composite Plate Finite Element Higher Order Shear Deformation Locking Phenomenon Assumed Strain Method |
title_short |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
title_full |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
title_fullStr |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
title_full_unstemmed |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
title_sort |
Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator |
author |
Nowak,Andrzej |
author_facet |
Nowak,Andrzej |
author_role |
author |
dc.contributor.author.fl_str_mv |
Nowak,Andrzej |
dc.subject.por.fl_str_mv |
Laminate Composite Plate Finite Element Higher Order Shear Deformation Locking Phenomenon Assumed Strain Method |
topic |
Laminate Composite Plate Finite Element Higher Order Shear Deformation Locking Phenomenon Assumed Strain Method |
description |
The subject of the present work is the numerical verification and experimental validation of the FEM model which would enable us to analyse the vibrations of collecting electrodes. The effectiveness of electrostatic precipitators (ESP) depends on many factors. One of these factors is the efficiency of periodic cleaning of the collecting electrodes; thus the dust is removed by inducing vibrations. These vibrations are caused by the axial impact of a hammer on an anvil beam. In the course of the impact, and afterwards, the stresses due to the impact are produced in both the rapper system and in the collecting electrode section. The paper presents a modified finite element method which can be used in simulations and to analyse the vibrations of collecting electrodes. In the verification process the calculation results obtained were compared with those from commercial software (Abaqus). The calculations and measured results were compared for validation. The comparisons were made using peak and RMS (root-mean-squared) values as well as special factors and hit rates. An acceptable compatibility of the results proves that the model can be applied in the analysis of vibrations of electrodes in design practice. |
publishDate |
2013 |
dc.date.none.fl_str_mv |
2013-01-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252013000100004 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252013000100004 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/S1679-78252013000100004 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
Associação Brasileira de Ciências Mecânicas |
publisher.none.fl_str_mv |
Associação Brasileira de Ciências Mecânicas |
dc.source.none.fl_str_mv |
Latin American Journal of Solids and Structures v.10 n.1 2013 reponame:Latin American journal of solids and structures (Online) instname:Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM) instacron:ABCM |
instname_str |
Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM) |
instacron_str |
ABCM |
institution |
ABCM |
reponame_str |
Latin American journal of solids and structures (Online) |
collection |
Latin American journal of solids and structures (Online) |
repository.name.fl_str_mv |
Latin American journal of solids and structures (Online) - Associação Brasileira de Engenharia e Ciências Mecânicas (ABCM) |
repository.mail.fl_str_mv |
abcm@abcm.org.br||maralves@usp.br |
_version_ |
1754302886929498112 |