Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Revista Produção Online |
Texto Completo: | https://www.producaoonline.org.br/rpo/article/view/3010 |
Resumo: | With a large number of competitors in the current market, companies need to search for innovations that maintain the quality of their product and decrease their cost of production. The improvement in production processes has increased the use of plastic materials as raw materials, which are priced lower than metals and are still resistant to corrosion. Injection molding is a method widely used in plastics processing. Because it presents many variables, this process needs to be very controlled so that the final pieces present the desired quality. This paper presents a case study carried out for improvements in the parameters of a two - piece injection process produced in ABS plastic at a company that manufactures hospital medical products located in the city of Pelotas, RS. In the accomplishment of the case study an experiment project was elaborated with four variables of the injection process and two critical dimensions for the assembly of the final product of each one of the pieces. |
id |
ABEPRO-2_627ae1949565449b9ef8bf45eda54c45 |
---|---|
oai_identifier_str |
oai:ojs.emnuvens.com.br:article/3010 |
network_acronym_str |
ABEPRO-2 |
network_name_str |
Revista Produção Online |
repository_id_str |
|
spelling |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plasticAplicação de projeto de experimentos para melhorias nos parâmetros de processo de injeção de duas peças produzidasInjection Process. ABS Plastic. Design of Experiments.Processo de Injeção. Plástico ABS. Projeto de Experimentos.With a large number of competitors in the current market, companies need to search for innovations that maintain the quality of their product and decrease their cost of production. The improvement in production processes has increased the use of plastic materials as raw materials, which are priced lower than metals and are still resistant to corrosion. Injection molding is a method widely used in plastics processing. Because it presents many variables, this process needs to be very controlled so that the final pieces present the desired quality. This paper presents a case study carried out for improvements in the parameters of a two - piece injection process produced in ABS plastic at a company that manufactures hospital medical products located in the city of Pelotas, RS. In the accomplishment of the case study an experiment project was elaborated with four variables of the injection process and two critical dimensions for the assembly of the final product of each one of the pieces.Com um grande número de concorrentes no mercado atual, as empresas precisam buscar por inovações que mantenham a qualidade do seu produto e diminuam o seu custo de produção. O avanço nos processos produtivos aumentou a utilização de materiais plásticos como matéria-prima, que apresentam um preço mais baixo do que materiais metálicos e ainda são resistentes a corrosão. A moldagem por injeção é um método muito utilizado na transformação de plásticos. Por apresentar muitas variáveis, esse tipo de produção precisa ser muito controlada para que as peças finais apresentem a qualidade desejada. Este artigo apresenta um estudo de caso realizado para melhorias nos parâmetros de um processo de injeção de duas peças produzidas em plástico ABS em uma empresa fabricante de produtos médico hospitalares situada na cidade de Pelotas no RS. Na realização do estudo de caso foi elaborado um projeto de experimentos com quatro variáveis do processo de injeção e duas cotas críticas para a montagem do produto final de cada uma das peças.Associação Brasileira de Engenharia de Produção2018-09-15info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfvideo/mp4https://www.producaoonline.org.br/rpo/article/view/301010.14488/1676-1901.v18i3.3010Revista Produção Online; Vol. 18 No. 3 (2018); 920-937Revista Produção Online; v. 18 n. 3 (2018); 920-9371676-1901reponame:Revista Produção Onlineinstname:Associação Brasileira de Engenharia de Produção (ABEPRO)instacron:ABEPROporhttps://www.producaoonline.org.br/rpo/article/view/3010/1696https://www.producaoonline.org.br/rpo/article/view/3010/1697Copyright (c) 2018 Revista Produção Onlineinfo:eu-repo/semantics/openAccessdos Santos, Ana Maria NunesFerreira Porto Rosa, ArianeRoyer, RogérioPorciuncula, Gilson Simões2018-09-15T12:37:22Zoai:ojs.emnuvens.com.br:article/3010Revistahttp://producaoonline.org.br/rpoPUBhttps://www.producaoonline.org.br/rpo/oai||producaoonline@gmail.com1676-19011676-1901opendoar:2018-09-15T12:37:22Revista Produção Online - Associação Brasileira de Engenharia de Produção (ABEPRO)false |
dc.title.none.fl_str_mv |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic Aplicação de projeto de experimentos para melhorias nos parâmetros de processo de injeção de duas peças produzidas |
title |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic |
spellingShingle |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic dos Santos, Ana Maria Nunes Injection Process. ABS Plastic. Design of Experiments. Processo de Injeção. Plástico ABS. Projeto de Experimentos. |
title_short |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic |
title_full |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic |
title_fullStr |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic |
title_full_unstemmed |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic |
title_sort |
Application of design of experiments (DOE) for improvements in the parameters of plastic injection process for two parts produced in abs plastic |
author |
dos Santos, Ana Maria Nunes |
author_facet |
dos Santos, Ana Maria Nunes Ferreira Porto Rosa, Ariane Royer, Rogério Porciuncula, Gilson Simões |
author_role |
author |
author2 |
Ferreira Porto Rosa, Ariane Royer, Rogério Porciuncula, Gilson Simões |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
dos Santos, Ana Maria Nunes Ferreira Porto Rosa, Ariane Royer, Rogério Porciuncula, Gilson Simões |
dc.subject.por.fl_str_mv |
Injection Process. ABS Plastic. Design of Experiments. Processo de Injeção. Plástico ABS. Projeto de Experimentos. |
topic |
Injection Process. ABS Plastic. Design of Experiments. Processo de Injeção. Plástico ABS. Projeto de Experimentos. |
description |
With a large number of competitors in the current market, companies need to search for innovations that maintain the quality of their product and decrease their cost of production. The improvement in production processes has increased the use of plastic materials as raw materials, which are priced lower than metals and are still resistant to corrosion. Injection molding is a method widely used in plastics processing. Because it presents many variables, this process needs to be very controlled so that the final pieces present the desired quality. This paper presents a case study carried out for improvements in the parameters of a two - piece injection process produced in ABS plastic at a company that manufactures hospital medical products located in the city of Pelotas, RS. In the accomplishment of the case study an experiment project was elaborated with four variables of the injection process and two critical dimensions for the assembly of the final product of each one of the pieces. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018-09-15 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://www.producaoonline.org.br/rpo/article/view/3010 10.14488/1676-1901.v18i3.3010 |
url |
https://www.producaoonline.org.br/rpo/article/view/3010 |
identifier_str_mv |
10.14488/1676-1901.v18i3.3010 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://www.producaoonline.org.br/rpo/article/view/3010/1696 https://www.producaoonline.org.br/rpo/article/view/3010/1697 |
dc.rights.driver.fl_str_mv |
Copyright (c) 2018 Revista Produção Online info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Copyright (c) 2018 Revista Produção Online |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf video/mp4 |
dc.publisher.none.fl_str_mv |
Associação Brasileira de Engenharia de Produção |
publisher.none.fl_str_mv |
Associação Brasileira de Engenharia de Produção |
dc.source.none.fl_str_mv |
Revista Produção Online; Vol. 18 No. 3 (2018); 920-937 Revista Produção Online; v. 18 n. 3 (2018); 920-937 1676-1901 reponame:Revista Produção Online instname:Associação Brasileira de Engenharia de Produção (ABEPRO) instacron:ABEPRO |
instname_str |
Associação Brasileira de Engenharia de Produção (ABEPRO) |
instacron_str |
ABEPRO |
institution |
ABEPRO |
reponame_str |
Revista Produção Online |
collection |
Revista Produção Online |
repository.name.fl_str_mv |
Revista Produção Online - Associação Brasileira de Engenharia de Produção (ABEPRO) |
repository.mail.fl_str_mv |
||producaoonline@gmail.com |
_version_ |
1761536951075209216 |