Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Brazilian Journal of Chemical Engineering |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0104-66322018000100051 |
Resumo: | Abstract A pilot-scale Submerged Membrane Bioreactor provided with PEI hollow fiber membranes was operated under constant pressure mode in order to evaluate the effects of hydrodynamic conditions on the process performance, such as air flow rate, module packing density and aeration configuration. For the three different air flow rates studied (2, 5 and 8 L/min), results showed a limit value for this parameter, in which above this value a better performance will not be obtained and can even be worse. The air flow rate of 5 L/min presented the best performance, followed by 8 and 2 L/min. The module packing density was studied for two diameters (0.75 and 1 inch); the best result was observed for the larger diameter module, because lower packing density causes more space between fibers, increasing the aeration homogeneity inside de fiber bundle. Both aeration geometric tested showed similar permeate fluxes, indicating they did not affect the process performance. For all hydrodynamic conditions, the removal of TOC and COD was 96% and 93%, respectively. |
id |
ABEQ-1_7b37739f28546104b8a0a88ade383410 |
---|---|
oai_identifier_str |
oai:scielo:S0104-66322018000100051 |
network_acronym_str |
ABEQ-1 |
network_name_str |
Brazilian Journal of Chemical Engineering |
repository_id_str |
|
spelling |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressureSubmerged Membrane Bioreactor (SMBR)AerationPacking DensityConstant PressureHollow FiberAbstract A pilot-scale Submerged Membrane Bioreactor provided with PEI hollow fiber membranes was operated under constant pressure mode in order to evaluate the effects of hydrodynamic conditions on the process performance, such as air flow rate, module packing density and aeration configuration. For the three different air flow rates studied (2, 5 and 8 L/min), results showed a limit value for this parameter, in which above this value a better performance will not be obtained and can even be worse. The air flow rate of 5 L/min presented the best performance, followed by 8 and 2 L/min. The module packing density was studied for two diameters (0.75 and 1 inch); the best result was observed for the larger diameter module, because lower packing density causes more space between fibers, increasing the aeration homogeneity inside de fiber bundle. Both aeration geometric tested showed similar permeate fluxes, indicating they did not affect the process performance. For all hydrodynamic conditions, the removal of TOC and COD was 96% and 93%, respectively.Brazilian Society of Chemical Engineering2018-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S0104-66322018000100051Brazilian Journal of Chemical Engineering v.35 n.1 2018reponame:Brazilian Journal of Chemical Engineeringinstname:Associação Brasileira de Engenharia Química (ABEQ)instacron:ABEQ10.1590/0104-6632.20180351s20160416info:eu-repo/semantics/openAccessCadore,Ígor RenzSilva,Maurício Kipper daPollo,Liliane DamarisTessaro,Isabel Cristinaeng2018-04-19T00:00:00Zoai:scielo:S0104-66322018000100051Revistahttps://www.scielo.br/j/bjce/https://old.scielo.br/oai/scielo-oai.phprgiudici@usp.br||rgiudici@usp.br1678-43830104-6632opendoar:2018-04-19T00:00Brazilian Journal of Chemical Engineering - Associação Brasileira de Engenharia Química (ABEQ)false |
dc.title.none.fl_str_mv |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
title |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
spellingShingle |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure Cadore,Ígor Renz Submerged Membrane Bioreactor (SMBR) Aeration Packing Density Constant Pressure Hollow Fiber |
title_short |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
title_full |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
title_fullStr |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
title_full_unstemmed |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
title_sort |
Wastewater treatment in a pilot-scale submerged membrane bioreactor: study of hydrodynamics under constant operating pressure |
author |
Cadore,Ígor Renz |
author_facet |
Cadore,Ígor Renz Silva,Maurício Kipper da Pollo,Liliane Damaris Tessaro,Isabel Cristina |
author_role |
author |
author2 |
Silva,Maurício Kipper da Pollo,Liliane Damaris Tessaro,Isabel Cristina |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Cadore,Ígor Renz Silva,Maurício Kipper da Pollo,Liliane Damaris Tessaro,Isabel Cristina |
dc.subject.por.fl_str_mv |
Submerged Membrane Bioreactor (SMBR) Aeration Packing Density Constant Pressure Hollow Fiber |
topic |
Submerged Membrane Bioreactor (SMBR) Aeration Packing Density Constant Pressure Hollow Fiber |
description |
Abstract A pilot-scale Submerged Membrane Bioreactor provided with PEI hollow fiber membranes was operated under constant pressure mode in order to evaluate the effects of hydrodynamic conditions on the process performance, such as air flow rate, module packing density and aeration configuration. For the three different air flow rates studied (2, 5 and 8 L/min), results showed a limit value for this parameter, in which above this value a better performance will not be obtained and can even be worse. The air flow rate of 5 L/min presented the best performance, followed by 8 and 2 L/min. The module packing density was studied for two diameters (0.75 and 1 inch); the best result was observed for the larger diameter module, because lower packing density causes more space between fibers, increasing the aeration homogeneity inside de fiber bundle. Both aeration geometric tested showed similar permeate fluxes, indicating they did not affect the process performance. For all hydrodynamic conditions, the removal of TOC and COD was 96% and 93%, respectively. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018-01-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0104-66322018000100051 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0104-66322018000100051 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/0104-6632.20180351s20160416 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
Brazilian Society of Chemical Engineering |
publisher.none.fl_str_mv |
Brazilian Society of Chemical Engineering |
dc.source.none.fl_str_mv |
Brazilian Journal of Chemical Engineering v.35 n.1 2018 reponame:Brazilian Journal of Chemical Engineering instname:Associação Brasileira de Engenharia Química (ABEQ) instacron:ABEQ |
instname_str |
Associação Brasileira de Engenharia Química (ABEQ) |
instacron_str |
ABEQ |
institution |
ABEQ |
reponame_str |
Brazilian Journal of Chemical Engineering |
collection |
Brazilian Journal of Chemical Engineering |
repository.name.fl_str_mv |
Brazilian Journal of Chemical Engineering - Associação Brasileira de Engenharia Química (ABEQ) |
repository.mail.fl_str_mv |
rgiudici@usp.br||rgiudici@usp.br |
_version_ |
1754213175848337408 |