Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Outros Autores: | , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Materials research (São Carlos. Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392015000500994 |
Resumo: | AbstractThe paper aimed at evaluating the feasibility and the properties of a new product which combines wood veneer and high-density polyethylene (HDPE) from post-consuming plastic bags. Three HDPE amounts were evaluated: 150g/m2, 250 g/m2 e 350 g/m2. The boards were manufactured using a single-opening hot-press under such conditions: 140ºC, for 20 minutes and pressure of 1 N/mm2. It was found that the production of this kind of composite board is technically possible and relatively simple and they did not present any veneer delamination. The properties of the composite boards were quite similar or even higher to those found in LVL made using thermosetting resin. The higher the HDPE amount the higher the density of the composite board, which imparted significantly in mechanical properties. However, when the composite boards were evaluated under same density the effect of the HDPE amount affected only Janka hardness. |
id |
ABMABCABPOL-1_4b546a796e2ca839bdbc11fe1b9d2e3b |
---|---|
oai_identifier_str |
oai:scielo:S1516-14392015000500994 |
network_acronym_str |
ABMABCABPOL-1 |
network_name_str |
Materials research (São Carlos. Online) |
repository_id_str |
|
spelling |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Boardlaminated veneer lumberpost-consuming plastic bagrecyclingAbstractThe paper aimed at evaluating the feasibility and the properties of a new product which combines wood veneer and high-density polyethylene (HDPE) from post-consuming plastic bags. Three HDPE amounts were evaluated: 150g/m2, 250 g/m2 e 350 g/m2. The boards were manufactured using a single-opening hot-press under such conditions: 140ºC, for 20 minutes and pressure of 1 N/mm2. It was found that the production of this kind of composite board is technically possible and relatively simple and they did not present any veneer delamination. The properties of the composite boards were quite similar or even higher to those found in LVL made using thermosetting resin. The higher the HDPE amount the higher the density of the composite board, which imparted significantly in mechanical properties. However, when the composite boards were evaluated under same density the effect of the HDPE amount affected only Janka hardness.ABM, ABC, ABPol2015-10-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392015000500994Materials Research v.18 n.5 2015reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/1516-1439.010615info:eu-repo/semantics/openAccessLustosa,Emanuela Camargo de BarrosDel Menezzi,Cláudio Henrique SoaresMelo,Rafael Rodolfo deeng2015-10-19T00:00:00Zoai:scielo:S1516-14392015000500994Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2015-10-19T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.none.fl_str_mv |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
title |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
spellingShingle |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board Lustosa,Emanuela Camargo de Barros laminated veneer lumber post-consuming plastic bag recycling |
title_short |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
title_full |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
title_fullStr |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
title_full_unstemmed |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
title_sort |
Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board |
author |
Lustosa,Emanuela Camargo de Barros |
author_facet |
Lustosa,Emanuela Camargo de Barros Del Menezzi,Cláudio Henrique Soares Melo,Rafael Rodolfo de |
author_role |
author |
author2 |
Del Menezzi,Cláudio Henrique Soares Melo,Rafael Rodolfo de |
author2_role |
author author |
dc.contributor.author.fl_str_mv |
Lustosa,Emanuela Camargo de Barros Del Menezzi,Cláudio Henrique Soares Melo,Rafael Rodolfo de |
dc.subject.por.fl_str_mv |
laminated veneer lumber post-consuming plastic bag recycling |
topic |
laminated veneer lumber post-consuming plastic bag recycling |
description |
AbstractThe paper aimed at evaluating the feasibility and the properties of a new product which combines wood veneer and high-density polyethylene (HDPE) from post-consuming plastic bags. Three HDPE amounts were evaluated: 150g/m2, 250 g/m2 e 350 g/m2. The boards were manufactured using a single-opening hot-press under such conditions: 140ºC, for 20 minutes and pressure of 1 N/mm2. It was found that the production of this kind of composite board is technically possible and relatively simple and they did not present any veneer delamination. The properties of the composite boards were quite similar or even higher to those found in LVL made using thermosetting resin. The higher the HDPE amount the higher the density of the composite board, which imparted significantly in mechanical properties. However, when the composite boards were evaluated under same density the effect of the HDPE amount affected only Janka hardness. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-10-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392015000500994 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392015000500994 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/1516-1439.010615 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
ABM, ABC, ABPol |
publisher.none.fl_str_mv |
ABM, ABC, ABPol |
dc.source.none.fl_str_mv |
Materials Research v.18 n.5 2015 reponame:Materials research (São Carlos. Online) instname:Universidade Federal de São Carlos (UFSCAR) instacron:ABM ABC ABPOL |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
ABM ABC ABPOL |
institution |
ABM ABC ABPOL |
reponame_str |
Materials research (São Carlos. Online) |
collection |
Materials research (São Carlos. Online) |
repository.name.fl_str_mv |
Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
dedz@power.ufscar.br |
_version_ |
1754212665823068160 |