Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin
Autor(a) principal: | |
---|---|
Data de Publicação: | 2016 |
Outros Autores: | , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Materials research (São Carlos. Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000100040 |
Resumo: | Experimental dental resins composed of triethyleneglycol dimethacrylate, urethane dimethacrylate, ethoxylated bisphenol-A-dimethacrylate and bisphenol A glycidyl methacrylate containing an organoclay as filler were prepared by photopolymerization. The addition of organoclay fillers results in slower polymerization rates (0.59 and 0.24 mol L-1 min-1, for the formulations without and with 15% of organoclay, respectively) and lower degrees of conversion (0.50 and 0.35 for the formulations without and with 15% of organoclay), as determined by photocalorimetry. The influence of the organoclay on the thermal and mechanical properties of the resins was evaluated using thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA) techniques. The (tan δ) and E´ curves indicate the formation of more rigid materials and the damping curve data indicates more homogeneous materials. An increase of storage modulus, E’, was observed for composites with the higher organoclay filler contents. These effects are due to the higher viscosity of the systems with organoclay, resulting in a lower mobility of the radicals during the propagation step of polymerization, as well as to the scattering of the incident photopolymerizing radiation, which lowers the amount of initiation centres. |
id |
ABMABCABPOL-1_6ed45afac071fe59ffb9472b75f1b4e9 |
---|---|
oai_identifier_str |
oai:scielo:S1516-14392016000100040 |
network_acronym_str |
ABMABCABPOL-1 |
network_name_str |
Materials research (São Carlos. Online) |
repository_id_str |
|
spelling |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resinDental materialsDental resinsNanocompositesThermal analysisOrganoclayExperimental dental resins composed of triethyleneglycol dimethacrylate, urethane dimethacrylate, ethoxylated bisphenol-A-dimethacrylate and bisphenol A glycidyl methacrylate containing an organoclay as filler were prepared by photopolymerization. The addition of organoclay fillers results in slower polymerization rates (0.59 and 0.24 mol L-1 min-1, for the formulations without and with 15% of organoclay, respectively) and lower degrees of conversion (0.50 and 0.35 for the formulations without and with 15% of organoclay), as determined by photocalorimetry. The influence of the organoclay on the thermal and mechanical properties of the resins was evaluated using thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA) techniques. The (tan δ) and E´ curves indicate the formation of more rigid materials and the damping curve data indicates more homogeneous materials. An increase of storage modulus, E’, was observed for composites with the higher organoclay filler contents. These effects are due to the higher viscosity of the systems with organoclay, resulting in a lower mobility of the radicals during the propagation step of polymerization, as well as to the scattering of the incident photopolymerizing radiation, which lowers the amount of initiation centres.ABM, ABC, ABPol2016-02-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000100040Materials Research v.19 n.1 2016reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/1980-5373-MR-2015-0169info:eu-repo/semantics/openAccessTerrin,Marina MartinsPoli,Alessandra LevesHorn Jr,Marco AntonioNeumann,Miguel GuillermoCavalheiro,Eder Tadeu GomesCorrea,Ivo CarlosSchmitt,Carla Cristinaeng2016-03-29T00:00:00Zoai:scielo:S1516-14392016000100040Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2016-03-29T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.none.fl_str_mv |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
title |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
spellingShingle |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin Terrin,Marina Martins Dental materials Dental resins Nanocomposites Thermal analysis Organoclay |
title_short |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
title_full |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
title_fullStr |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
title_full_unstemmed |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
title_sort |
Effect of the loading of organomodified clays on the thermal and mechanical properties of a model dental resin |
author |
Terrin,Marina Martins |
author_facet |
Terrin,Marina Martins Poli,Alessandra Leves Horn Jr,Marco Antonio Neumann,Miguel Guillermo Cavalheiro,Eder Tadeu Gomes Correa,Ivo Carlos Schmitt,Carla Cristina |
author_role |
author |
author2 |
Poli,Alessandra Leves Horn Jr,Marco Antonio Neumann,Miguel Guillermo Cavalheiro,Eder Tadeu Gomes Correa,Ivo Carlos Schmitt,Carla Cristina |
author2_role |
author author author author author author |
dc.contributor.author.fl_str_mv |
Terrin,Marina Martins Poli,Alessandra Leves Horn Jr,Marco Antonio Neumann,Miguel Guillermo Cavalheiro,Eder Tadeu Gomes Correa,Ivo Carlos Schmitt,Carla Cristina |
dc.subject.por.fl_str_mv |
Dental materials Dental resins Nanocomposites Thermal analysis Organoclay |
topic |
Dental materials Dental resins Nanocomposites Thermal analysis Organoclay |
description |
Experimental dental resins composed of triethyleneglycol dimethacrylate, urethane dimethacrylate, ethoxylated bisphenol-A-dimethacrylate and bisphenol A glycidyl methacrylate containing an organoclay as filler were prepared by photopolymerization. The addition of organoclay fillers results in slower polymerization rates (0.59 and 0.24 mol L-1 min-1, for the formulations without and with 15% of organoclay, respectively) and lower degrees of conversion (0.50 and 0.35 for the formulations without and with 15% of organoclay), as determined by photocalorimetry. The influence of the organoclay on the thermal and mechanical properties of the resins was evaluated using thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA) techniques. The (tan δ) and E´ curves indicate the formation of more rigid materials and the damping curve data indicates more homogeneous materials. An increase of storage modulus, E’, was observed for composites with the higher organoclay filler contents. These effects are due to the higher viscosity of the systems with organoclay, resulting in a lower mobility of the radicals during the propagation step of polymerization, as well as to the scattering of the incident photopolymerizing radiation, which lowers the amount of initiation centres. |
publishDate |
2016 |
dc.date.none.fl_str_mv |
2016-02-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000100040 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000100040 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/1980-5373-MR-2015-0169 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
ABM, ABC, ABPol |
publisher.none.fl_str_mv |
ABM, ABC, ABPol |
dc.source.none.fl_str_mv |
Materials Research v.19 n.1 2016 reponame:Materials research (São Carlos. Online) instname:Universidade Federal de São Carlos (UFSCAR) instacron:ABM ABC ABPOL |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
ABM ABC ABPOL |
institution |
ABM ABC ABPOL |
reponame_str |
Materials research (São Carlos. Online) |
collection |
Materials research (São Carlos. Online) |
repository.name.fl_str_mv |
Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
dedz@power.ufscar.br |
_version_ |
1754212667839479808 |