Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser
Autor(a) principal: | |
---|---|
Data de Publicação: | 2007 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Materials research (São Carlos. Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392007000400022 |
Resumo: | An automotive shaft was surface-remelted and hardened using a 2 kW fiber laser and an adapted linear axis whose rotating axis produced helical tracks at 120 RPM. The process variable was the laser power, ranging from 300 to 1100 W, which produced two regions in the material: a martensitic region (MR) and a partially transformed region (PTR). The MR is formed after rapid solidification or austenitization followed by rapid cooling (10(7) K.s-1). The PTR is composed of martensite, unchanged pearlite and proeutectoid ferrite. The maximum case depth was about 0.3 mm. The microhardness inside the martensitic regions are at least double that of the base material, i.e. between 800 than 600 HV compared to 300 HV. Thermal simulations using a modified Rosenthal formalism help elucidate the phase transformation inside the material and show good agreement with experimental results. The experimental laser-steel absorptivities were measured; they ranged between 38 and 59% depending on the laser power and the amount of liquid at the surface. |
id |
ABMABCABPOL-1_9f739ea37ab9685e133ff09a0a9e7785 |
---|---|
oai_identifier_str |
oai:scielo:S1516-14392007000400022 |
network_acronym_str |
ABMABCABPOL-1 |
network_name_str |
Materials research (São Carlos. Online) |
repository_id_str |
|
spelling |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laserlaser surface hardeninglaser remeltingfiber laserAn automotive shaft was surface-remelted and hardened using a 2 kW fiber laser and an adapted linear axis whose rotating axis produced helical tracks at 120 RPM. The process variable was the laser power, ranging from 300 to 1100 W, which produced two regions in the material: a martensitic region (MR) and a partially transformed region (PTR). The MR is formed after rapid solidification or austenitization followed by rapid cooling (10(7) K.s-1). The PTR is composed of martensite, unchanged pearlite and proeutectoid ferrite. The maximum case depth was about 0.3 mm. The microhardness inside the martensitic regions are at least double that of the base material, i.e. between 800 than 600 HV compared to 300 HV. Thermal simulations using a modified Rosenthal formalism help elucidate the phase transformation inside the material and show good agreement with experimental results. The experimental laser-steel absorptivities were measured; they ranged between 38 and 59% depending on the laser power and the amount of liquid at the surface.ABM, ABC, ABPol2007-12-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392007000400022Materials Research v.10 n.4 2007reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/S1516-14392007000400022info:eu-repo/semantics/openAccessLima,Milton Sergio Fernandes deGoia,Flávia AlineRiva,RudimarEspírito Santo,Ana Maria doeng2008-02-07T00:00:00Zoai:scielo:S1516-14392007000400022Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2008-02-07T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.none.fl_str_mv |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
title |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
spellingShingle |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser Lima,Milton Sergio Fernandes de laser surface hardening laser remelting fiber laser |
title_short |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
title_full |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
title_fullStr |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
title_full_unstemmed |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
title_sort |
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser |
author |
Lima,Milton Sergio Fernandes de |
author_facet |
Lima,Milton Sergio Fernandes de Goia,Flávia Aline Riva,Rudimar Espírito Santo,Ana Maria do |
author_role |
author |
author2 |
Goia,Flávia Aline Riva,Rudimar Espírito Santo,Ana Maria do |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Lima,Milton Sergio Fernandes de Goia,Flávia Aline Riva,Rudimar Espírito Santo,Ana Maria do |
dc.subject.por.fl_str_mv |
laser surface hardening laser remelting fiber laser |
topic |
laser surface hardening laser remelting fiber laser |
description |
An automotive shaft was surface-remelted and hardened using a 2 kW fiber laser and an adapted linear axis whose rotating axis produced helical tracks at 120 RPM. The process variable was the laser power, ranging from 300 to 1100 W, which produced two regions in the material: a martensitic region (MR) and a partially transformed region (PTR). The MR is formed after rapid solidification or austenitization followed by rapid cooling (10(7) K.s-1). The PTR is composed of martensite, unchanged pearlite and proeutectoid ferrite. The maximum case depth was about 0.3 mm. The microhardness inside the martensitic regions are at least double that of the base material, i.e. between 800 than 600 HV compared to 300 HV. Thermal simulations using a modified Rosenthal formalism help elucidate the phase transformation inside the material and show good agreement with experimental results. The experimental laser-steel absorptivities were measured; they ranged between 38 and 59% depending on the laser power and the amount of liquid at the surface. |
publishDate |
2007 |
dc.date.none.fl_str_mv |
2007-12-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392007000400022 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392007000400022 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/S1516-14392007000400022 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
ABM, ABC, ABPol |
publisher.none.fl_str_mv |
ABM, ABC, ABPol |
dc.source.none.fl_str_mv |
Materials Research v.10 n.4 2007 reponame:Materials research (São Carlos. Online) instname:Universidade Federal de São Carlos (UFSCAR) instacron:ABM ABC ABPOL |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
ABM ABC ABPOL |
institution |
ABM ABC ABPOL |
reponame_str |
Materials research (São Carlos. Online) |
collection |
Materials research (São Carlos. Online) |
repository.name.fl_str_mv |
Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
dedz@power.ufscar.br |
_version_ |
1754212658857377792 |