Statistic evaluation of cysteine and allyl alcohol as additives for Cu-Zn coatings from citrate baths

• Autor(a) principal: Garcia,Julyana Ribeiro
• Data de Publicação: 2013
• Outros Autores: Lago,Dalva Cristina Baptista do, Silva,Fernando Lucas Gonçalves, D'Elia,Eliane, Luna,Aderval Severino, Senna,Lilian Ferreira de
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Materials research (São Carlos. Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392013000200016
• topic: electrodeposition; citrate bath; cysteine; allyl alcohol; Cu-Zn alloy

In the present work, cysteine and allyl alcohol were added to citrate baths as additives to Cu-Zn coatings on steel substrates. In order to verify the effects of the deposition parameters (current density, mechanical stirring speed, and additives) on the coating composition, electrochemical behavior, morphology, and microstructure properties of Cu-Zn coatings, the electrodeposition of the alloy was carried out using an experimental composite design 2³, in which these parameters were considered the entry variables and the measured properties were the response variables. The confidence level was 95% and the results were shown as response surface diagrams. It was possible to verify that the current density affected the zinc content in the coating, while the coating produced from cysteine-contained bath presented the worse anticorrosive performance. In a general way, it was possible to observe that the studied parameters affected the morphology, grain size, and the electrochemical behavior of these coatings, although only a few response variables were statistically influenced by them.