Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws
Autor(a) principal: | |
---|---|
Data de Publicação: | 2016 |
Outros Autores: | , , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Materials research (São Carlos. Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000300588 |
Resumo: | This experimental in vitro study evaluated the influence of screw length on the mechanical properties of a locking reconstruction plate designed with locking rings inserted into plate holes. Synthetic bone cylinders with 10 mm fracture gap and seven-hole locking reconstruction plates were used. Two groups of bone-plate constructs were assembled: Group 1 – three monocortical screws on each fracture side, Group 2 - three bicortical screws on each fracture side. In each group nine bone-plate constructs were tested until failure, three each in bending, compression and torsion. In each group, 21 bone-plate constructs were tested for failure in fatigue testing, seven each for bending, compression and torsion. In all static testing no significant differences were found between G1 and G2, except ultimate moment in torsion test (G2>G1; P=0.008). Statistical analysis revealed significant differences between groups in axial compression fatigue testing (G1>G2; P<0.05) and four-point bending fatigue testing (G1<G2; P<0.05) in maximum load, minimum load, maximum moment, and minimum moment. In conclusion, screw length can affect the mechanical properties of locking reconstruction plate. Compared to bicortical screws, monocortical screws were less resistant to bending than axial compression. This must be considered when choosing implant, particularly in fractures under high axial loads. |
id |
ABMABCABPOL-1_eebd8cf7c11c004b37004591f173b678 |
---|---|
oai_identifier_str |
oai:scielo:S1516-14392016000300588 |
network_acronym_str |
ABMABCABPOL-1 |
network_name_str |
Materials research (São Carlos. Online) |
repository_id_str |
|
spelling |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical ScrewsFracturebone-plateMechanical studyThis experimental in vitro study evaluated the influence of screw length on the mechanical properties of a locking reconstruction plate designed with locking rings inserted into plate holes. Synthetic bone cylinders with 10 mm fracture gap and seven-hole locking reconstruction plates were used. Two groups of bone-plate constructs were assembled: Group 1 – three monocortical screws on each fracture side, Group 2 - three bicortical screws on each fracture side. In each group nine bone-plate constructs were tested until failure, three each in bending, compression and torsion. In each group, 21 bone-plate constructs were tested for failure in fatigue testing, seven each for bending, compression and torsion. In all static testing no significant differences were found between G1 and G2, except ultimate moment in torsion test (G2>G1; P=0.008). Statistical analysis revealed significant differences between groups in axial compression fatigue testing (G1>G2; P<0.05) and four-point bending fatigue testing (G1<G2; P<0.05) in maximum load, minimum load, maximum moment, and minimum moment. In conclusion, screw length can affect the mechanical properties of locking reconstruction plate. Compared to bicortical screws, monocortical screws were less resistant to bending than axial compression. This must be considered when choosing implant, particularly in fractures under high axial loads.ABM, ABC, ABPol2016-06-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000300588Materials Research v.19 n.3 2016reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/1980-5373-MR-2015-0596info:eu-repo/semantics/openAccessSantos,Rogerio RodriguesRahal,Sheila CaneveseMesquita Neto,CamiloRibeiro,Celso RobertoSousa,Edson Antonio CapelloFoschini,Cesar RenatoAgostinho,Felipe StefanMesquita,Luciane dos Reiseng2016-05-19T00:00:00Zoai:scielo:S1516-14392016000300588Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2016-05-19T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.none.fl_str_mv |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
title |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
spellingShingle |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws Santos,Rogerio Rodrigues Fracture bone-plate Mechanical study |
title_short |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
title_full |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
title_fullStr |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
title_full_unstemmed |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
title_sort |
Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws |
author |
Santos,Rogerio Rodrigues |
author_facet |
Santos,Rogerio Rodrigues Rahal,Sheila Canevese Mesquita Neto,Camilo Ribeiro,Celso Roberto Sousa,Edson Antonio Capello Foschini,Cesar Renato Agostinho,Felipe Stefan Mesquita,Luciane dos Reis |
author_role |
author |
author2 |
Rahal,Sheila Canevese Mesquita Neto,Camilo Ribeiro,Celso Roberto Sousa,Edson Antonio Capello Foschini,Cesar Renato Agostinho,Felipe Stefan Mesquita,Luciane dos Reis |
author2_role |
author author author author author author author |
dc.contributor.author.fl_str_mv |
Santos,Rogerio Rodrigues Rahal,Sheila Canevese Mesquita Neto,Camilo Ribeiro,Celso Roberto Sousa,Edson Antonio Capello Foschini,Cesar Renato Agostinho,Felipe Stefan Mesquita,Luciane dos Reis |
dc.subject.por.fl_str_mv |
Fracture bone-plate Mechanical study |
topic |
Fracture bone-plate Mechanical study |
description |
This experimental in vitro study evaluated the influence of screw length on the mechanical properties of a locking reconstruction plate designed with locking rings inserted into plate holes. Synthetic bone cylinders with 10 mm fracture gap and seven-hole locking reconstruction plates were used. Two groups of bone-plate constructs were assembled: Group 1 – three monocortical screws on each fracture side, Group 2 - three bicortical screws on each fracture side. In each group nine bone-plate constructs were tested until failure, three each in bending, compression and torsion. In each group, 21 bone-plate constructs were tested for failure in fatigue testing, seven each for bending, compression and torsion. In all static testing no significant differences were found between G1 and G2, except ultimate moment in torsion test (G2>G1; P=0.008). Statistical analysis revealed significant differences between groups in axial compression fatigue testing (G1>G2; P<0.05) and four-point bending fatigue testing (G1<G2; P<0.05) in maximum load, minimum load, maximum moment, and minimum moment. In conclusion, screw length can affect the mechanical properties of locking reconstruction plate. Compared to bicortical screws, monocortical screws were less resistant to bending than axial compression. This must be considered when choosing implant, particularly in fractures under high axial loads. |
publishDate |
2016 |
dc.date.none.fl_str_mv |
2016-06-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000300588 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016000300588 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/1980-5373-MR-2015-0596 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
ABM, ABC, ABPol |
publisher.none.fl_str_mv |
ABM, ABC, ABPol |
dc.source.none.fl_str_mv |
Materials Research v.19 n.3 2016 reponame:Materials research (São Carlos. Online) instname:Universidade Federal de São Carlos (UFSCAR) instacron:ABM ABC ABPOL |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
ABM ABC ABPOL |
institution |
ABM ABC ABPOL |
reponame_str |
Materials research (São Carlos. Online) |
collection |
Materials research (São Carlos. Online) |
repository.name.fl_str_mv |
Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
dedz@power.ufscar.br |
_version_ |
1754212667864645632 |